A vortex-type micromixer utilizing pneumatically driven membranes

Micromixers are commonly employed for chemical or biological analysis in micro-total-analysis-system applications. Mixing performance is important since it allows for rapid and efficient chemical or biological reactions. This study, therefore, reports a new vortex-type micromixer which utilizes pneumatically driven membranes to generate a swirling flow in a mixing chamber. The micromixer chip is fabricated by using micro-electro-mechanical-systems technology as well as a computer-numerically controlled machine for rapid prototyping. Two different membrane layouts and driving frequencies are evaluated to determine if there is a significant improvement in the mixing performance. Experimental results indicate that the mixing efficiency increases with increasing driving frequencies and the mixing time is reduced by approximately tenfold as the driving frequency increases from 1 to 6 Hz. A mixing efficiency as high as 95% can be achieved, in time periods as short as 0.6 and 0.7 s for the two- and four-membrane layouts, respectively. Furthermore, numerical simulations are also employed to characterize the swirling flow field, the concentration distribution and the mixing mechanism as well. Combined experimental data and numerical results illustrate the fluid dynamic phenomena that allow for rapid mixing in this vortex-type micromixer.

[1]  Gwo-Bin Lee,et al.  Pneumatic micropumps with serially connected actuation chambers , 2006 .

[2]  F. Regnier,et al.  A picoliter-volume mixer for microfluidic analytical systems. , 2001, Analytical chemistry.

[3]  H. Bau,et al.  A minute magneto hydro dynamic (MHD) mixer , 2001 .

[4]  Albert van den Berg,et al.  A Rapid Vortex Micromixer for Studying High-Speed Chemical Reactions , 2001 .

[5]  Gwo-Bin Lee,et al.  Micro flow cytometry utilizing a magnetic bead-based immunoassay for rapid virus detection. , 2008, Biosensors & bioelectronics.

[6]  Che-Hsin Lin,et al.  A rapid three-dimensional vortex micromixer utilizing self-rotation effects under low Reynolds number conditions , 2005 .

[7]  Gwo-Bin Lee,et al.  Pneumatically driven peristaltic micropumps utilizing serpentine-shape channels , 2006 .

[8]  Ajdari Generation of transverse fluid currents and forces by an electric field: Electro-osmosis on charge-modulated and undulated surfaces. , 1996, Physical review. E, Statistical physics, plasmas, fluids, and related interdisciplinary topics.

[9]  James C Baygents,et al.  Electrically-driven fluid motion in channels with streamwise gradients of the electrical conductivity , 2001 .

[10]  Jens Anders Branebjerg,et al.  Fast mixing by lamination , 1996, Proceedings of Ninth International Workshop on Micro Electromechanical Systems.

[11]  Gwo-Bin Lee,et al.  Synthesis of gold nanoparticles using a vortex-type micro-mixing system , 2009, 2009 4th IEEE International Conference on Nano/Micro Engineered and Molecular Systems.

[12]  R. Schasfoort,et al.  Field-effect flow control for microfabricated fluidic networks , 1999, Science.

[13]  P. Tabeling,et al.  Chaotic Mixing in Electrokinetically Pressure Driven System Flows , 2001 .

[14]  Armand Ajdari,et al.  Transverse electrokinetic and microfluidic effects in micropatterned channels: lubrication analysis for slab geometries. , 2001, Physical review. E, Statistical, nonlinear, and soft matter physics.

[15]  T. Fujii,et al.  Handling of Picoliter Liquid Samples in a Poly(dimethylsiloxane)-Based Microfluidic Device , 1999 .

[16]  W. C. Jackson,et al.  Mixing small volumes for continuous high-throughput flow cytometry: performance of a mixing Y and peristaltic sample delivery. , 2002, Cytometry.

[17]  H. Goto,et al.  Active micromixer for microfluidic systems using lead‐zirconate‐titanate(PZT)‐generated ultrasonic vibration , 2000, Electrophoresis.

[18]  Chih-Ming Ho,et al.  Characterization of a MEMS-Fabricated Mixing Device , 2000, Micro-Electro-Mechanical Systems (MEMS).

[19]  Yu-Cheng Lin,et al.  Design of passive mixers utilizing microfluidic self-circulation in the mixing chamber. , 2004, Lab on a chip.

[20]  A. Manz,et al.  Microstructure for efficient continuous flow mixing , 1999 .

[21]  Jr-Lung Lin,et al.  Purification and enrichment of virus samples utilizing magnetic beads on a microfluidic system. , 2007, Lab on a chip.

[22]  I. Mezić,et al.  Chaotic Mixer for Microchannels , 2002, Science.

[23]  Gwo-Bin Lee,et al.  Membrane-activated microfluidic rotary devices for pumping and mixing , 2007, Biomedical microdevices.

[24]  Gwo-Bin Lee,et al.  Integrated reverse transcription polymerase chain reaction systems for virus detection. , 2007, Biosensors & bioelectronics.

[25]  Paul Yager,et al.  Simple quantitative optical method for monitoring the extent of mixing applied to a novel microfluidic mixer , 2004 .

[26]  Gwo-Bin Lee,et al.  Active mixing inside microchannels utilizing dynamic variation of gradient zeta potentials , 2005, Electrophoresis.

[27]  Dong-Woo Cho,et al.  A barrier embedded Kenics micromixer , 2004 .

[28]  Howard A. Stone,et al.  ENGINEERING FLOWS IN SMALL DEVICES , 2004 .

[29]  Gwo-Bin Lee,et al.  Active micro-mixers using surface acoustic waves on Y-cut 128° LiNbO3 , 2006 .

[30]  Igor Mezić,et al.  Mixing in the shear superposition micromixer: three-dimensional analysis , 2004, Philosophical Transactions of the Royal Society of London. Series A: Mathematical, Physical and Engineering Sciences.

[31]  Armand Ajdari,et al.  Patterning flows using grooved surfaces. , 2002, Analytical chemistry.

[32]  Shizhi Qian,et al.  A magnetohydrodynamic chaotic stirrer , 2002, Journal of Fluid Mechanics.

[33]  A. Evans,et al.  Improved characterization technique for micromixers , 1999 .

[34]  Robin H. Liu,et al.  Passive mixing in a three-dimensional serpentine microchannel , 2000, Journal of Microelectromechanical Systems.

[35]  Nadine Aubry,et al.  Electro-hydrodynamic micro-fluidic mixer. , 2003, Lab on a chip.

[36]  J. Berg,et al.  Flow of multiple fluids in a small dimension. , 2002, Analytical chemistry.

[37]  Jr-Lung Lin,et al.  Active micro-mixers utilizing moving wall structures activated pneumatically by buried side chambers , 2006 .

[38]  Haim H. Bau,et al.  a Magneto-Hydrodynamic (mhd), Chaotic Stirrer , 2001 .

[39]  D. Erickson,et al.  Influence of Surface Heterogeneity on Electrokinetically Driven Microfluidic Mixing , 2002 .

[40]  Jens Anders Branebjerg,et al.  Microfluidics-a review , 1993 .

[41]  Jr-Lung Lin,et al.  Active micro-mixers utilizing a gradient zeta potential induced by inclined buried shielding electrodes , 2006 .