A computational model for the flow of resin in self-healing composites

To explore the flow characteristics of healing agent leaving a vascular network and infusing a damage site within a fibre reinforced polymer composite, a numerical model of healing agent flow from an orifice has been developed using smoothed particle hydrodynamics. As an initial validation the discharge coefficient for low Reynolds number flow from a cylindrical tank is calculated numerically, using two different viscosity formulations, and compared to existing experimental data. Results of this comparison are very favourable; the model is able to reproduce experimental results for the discharge coefficient in the high Reynolds number limit, together with the power-law behaviour for low Reynolds numbers. Results are also presented for a representative delamination geometry showing healing fluid behaviour and fraction filled inside the delamination for a variety of fluid viscosities. This work provides the foundations for the vascular self-healing community in calculating not only the flow rate through the network, but also, by simulating a representative damage site, the final location of the healing fluid within the damage site in order to assess the improvement in local and global mechanical properties and thus healing efficiency.

[1]  J. Morris,et al.  Modeling Low Reynolds Number Incompressible Flows Using SPH , 1997 .

[2]  J. Brackbill,et al.  A continuum method for modeling surface tension , 1992 .

[3]  Ian P Bond,et al.  Interactions between propagating cracks and bioinspired self-healing vascules embedded in glass fibre reinforced composites , 2011 .

[4]  J. Monaghan.  Simulating Free Surface Flows with SPH , 1994 .

[5]  Philip J. Withers,et al.  X-Ray Damage Characterisation in Self-Healing Fibre Reinforced Polymers , 2012 .

[6]  S. White,et al.  Self-activated healing of delamination damage in woven composites , 2001 .

[7]  Tomasz Kiljański.  Discharge Coefficient for Free Jets From Orifices at Low Reynolds Number , 1993 .

[8]  J. Monaghan,et al.  Smoothed particle hydrodynamics: Theory and application to non-spherical stars , 1977 .

[9]  I. Bond,et al.  Biomimetic self-healing of advanced composite structures using hollow glass fibres , 2006 .

[10]  Holger Wendland,et al.  Piecewise polynomial, positive definite and compactly supported radial functions of minimal degree , 1995, Adv. Comput. Math..

[11]  Ian P Bond,et al.  Self-healing composite sandwich structures , 2007 .

[12]  Paul W. Cleary,et al.  Flow modelling in casting processes , 2002 .

[13]  John S. Anagnostopoulos,et al.  SPH Method used for Flow Predictions at a Turgo Impulse Turbine: Comparison with Fluent , 2011 .

[14]  J. Lewis,et al.  Self-healing materials with microvascular networks. , 2007, Nature materials.

[15]  Zhao-yao Zhou,et al.  Simulation of mould filling process using smoothed particle hydrodynamics , 2011 .

[16]  Ian P Bond,et al.  Compression after impact assessment of self-healing CFRP , 2009 .

[17]  W. Wall,et al.  Fixed-point fluid–structure interaction solvers with dynamic relaxation , 2008 .

[18]  L. Lucy.  A numerical approach to the testing of the fission hypothesis. , 1977 .

[19]  J. Lewis,et al.  Delivery of Two‐Part Self‐Healing Chemistry via Microvascular Networks , 2009 .

[20]  N. Sottos,et al.  Autonomic healing of polymer composites , 2001, Nature.

[21]  Ian P Bond,et al.  Self-healing sandwich panels: Restoration of compressive strength after impact , 2008 .

[22]  Joseph J Monaghan,et al.  An introduction to SPH , 1987 .

[23]  Paul W. Cleary,et al.  Modelling confined multi-material heat and mass flows using SPH , 1998 .

[24]  J. Morris.  Simulating surface tension with smoothed particle hydrodynamics , 2000 .

[25]  Bart Smeets,et al.  Solving microscopic flow problems using Stokes equations in SPH , 2013, Comput. Phys. Commun..

[26]  Paul Meakin,et al.  Modeling of surface tension and contact angles with smoothed particle hydrodynamics. , 2005, Physical review. E, Statistical, nonlinear, and soft matter physics.

[27]  J. Monaghan.  Smoothed particle hydrodynamics , 2005 .

[28]  N. Sottos,et al.  Restoration of Large Damage Volumes in Polymers , 2014, Science.

[29]  Ian P Bond,et al.  The Role Of Embedded Bioinspired Vasculature On Damage Formation In Self-Healing Carbon Fibre Reinforced Composites , 2011 .

[30]  R S Trask,et al.  Self-healing polymer composites: mimicking nature to enhance performance , 2007, Bioinspiration & biomimetics.

[31]  Nancy R. Sottos,et al.  Autonomic healing of low-velocity impact damage in fiber-reinforced composites , 2009 .

[32]  C. W. Hirt,et al.  Volume of fluid (VOF) method for the dynamics of free boundaries , 1981 .

[33]  Zhaochen Sun,et al.  Numerical Simulations of Water Wave Dynamics Based on SPH Methods , 2009 .

[34]  Ian P Bond,et al.  Self‐Healing Fibre Reinforced Composites via a Bioinspired Vasculature , 2011 .

[35]  Paul W. Cleary,et al.  3D SPH flow predictions and validation for high pressure die casting of automotive components , 2006 .

[36]  M. Dziubiński,et al.  Discharge of newtonian and non-Newtonian liquids from tanks , 2006 .

[37]  Paul W. Cleary,et al.  SIMULATION OF DIE FILLING IN GRAVITY DIE CASTING USING SPH AND MAGMAsoft , 1999 .

[38]  Guirong Liu,et al.  Smoothed Particle Hydrodynamics: A Meshfree Particle Method , 2003 .

[39]  S. Shao,et al.  INCOMPRESSIBLE SPH METHOD FOR SIMULATING NEWTONIAN AND NON-NEWTONIAN FLOWS WITH A FREE SURFACE , 2003 .

[40]  Ian P Bond,et al.  A self-healing carbon fibre reinforced polymer for aerospace applications , 2007 .

[41]  Ian P Bond,et al.  Predicting self-healing strength recovery using a multi-objective genetic algorithm , 2012 .

[42]  Daniel J. Price.  Smoothed particle hydrodynamics and magnetohydrodynamics , 2010, J. Comput. Phys..