Experimental analysis of a cooling system effect on photovoltaic panels' efficiency and its preheating water production

Abstract This paper addresses a low complexity and high efficient cooling system applicable on photovoltaic (PV) system leading to enhance electrical efficiency and provide preheated water. The developed system consists of a photovoltaic panel, a cooling water system establishing a uniform surface temperature, and a solar water heater. According to the proposed system characteristics, the setup is constructed based on a single mono-crystalline solar panel to absorb more solar radiation intensity and generate more electrical energy per area in compare to a poly-crystalline panel. The preheated water produced by absorbed heat from the photovoltaic is conducted to a solar water heater to satisfy domestic hot water demand. The experimental results show the electrical, thermal and overall energy efficiencies are boosted to 12.3%, 49.4%, and 61.7%, respectively. The results are obtained on July in Tehran, Iran. Moreover, comparing the performance of the cooling system with the conventional systems reveals that the proposed system has higher efficiency originated from the uniform minute holes in the implemented shower stuck on the panel back. Furthermore, if the heat transferred to water in the cooling system is utilized, the payback period is estimated 1.7 years; otherwise, the payback period exceeds 8.7 years if only PV conversion efficiency is included.

[1]  Tin-Tai Chow,et al.  A Review on Photovoltaic/Thermal Hybrid Solar Technology , 2010, Renewable Energy.

[2]  Said Farahat,et al.  An improved thermal and electrical model for a solar photovoltaic thermal (PV/T) air collector , 2010 .

[3]  de Dw Douwe Vries.  Design of a photovoltaic/thermal combi-panel , 1998 .

[4]  Morteza Abdolzadeh,et al.  Improving the effectiveness of a photovoltaic water pumping system by spraying water over the front of photovoltaic cells , 2009 .

[5]  S. Iniyan,et al.  Flat plate solar photovoltaic–thermal (PV/T) systems : A reference guide , 2015 .

[6]  Gianpiero Colangelo,et al.  Performance Evaluation of a New Type of Combined Photovoltaic–Thermal Solar Collector , 2015 .

[7]  Gilles Notton,et al.  Calculation of the polycrystalline PV module temperature using a simple method of energy balance , 2006 .

[8]  Ha Herbert Zondag,et al.  The thermal and electrical yield of a PV-thermal collector , 2002 .

[9]  Jai Prakash,et al.  Transient analysis of a photovoltaic-thermal solar collector for co-generation of electricity and hot air/water , 1994 .

[10]  Kamaruzzaman Sopian,et al.  Efficiencies and improvement potential of building integrated photovoltaic thermal (BIPVT) system , 2014 .

[11]  Soteris A. Kalogirou,et al.  Photovoltaic thermal (PV/T) collectors: A review , 2007 .

[12]  Swapnil Dubey,et al.  Thermal modeling of a combined system of photovoltaic thermal (PV/T) solar water heater , 2008 .

[13]  Bin-Juine Huang,et al.  PERFORMANCE EVALUATION OF SOLAR PHOTOVOLTAIC / THERMAL SYSTEMS , 2001 .

[14]  Cătălin George Popovici,et al.  Efficiency Improvement of Photovoltaic Panels by Using Air Cooled Heat Sinks , 2016 .

[15]  Daniel Chemisana,et al.  Photovoltaic/thermal (PVT) systems: A review with emphasis on environmental issues , 2017 .

[16]  C. Brabec,et al.  Experimental efficiency of a low concentrating CPC PVT flat plate collector , 2017 .

[17]  Rohit Tripathi,et al.  Annual performance evaluation (energy and exergy) of fully covered concentrated photovoltaic thermal (PVT) water collector: An experimental validation , 2017 .

[18]  Shintaro Yokoyama,et al.  Field experiments and analyses on a hybrid solar collector , 2003 .

[19]  Kamaruzzaman Sopian,et al.  Performance analysis of photovoltaic thermal (PVT) water collectors , 2014 .

[20]  S. Kalogirou.  Solar Energy Engineering: Processes and Systems , 2009 .

[21]  Sandro Nižetić,et al.  Water spray cooling technique applied on a photovoltaic panel: The performance response , 2016 .