Effect of deformation temperature on deformation mechanism of Fe-6.5Si alloys with different initial microstructures

[1]  Zhiping Xiong,et al.  Effect of Temperature on Microstructure and Deformation Mechanism of Fe-30Mn-3Si-4Al TWIP Steel at Strain Rate of 700 s−1 , 2015 .

[2]  Huajian Gao,et al.  Evading the strength–ductility trade-off dilemma in steel through gradient hierarchical nanotwins , 2014, Nature Communications.

[3]  Tao Wu,et al.  Influence of Initial Microstructure on Warm Deformation Processability and Microstructure of an Ultrahigh Carbon Steel , 2014 .

[4]  Fei Gao,et al.  Development of λ-fiber recrystallization texture and magnetic property in Fe–6.5 wt% Si thin sheet produced by strip casting and warm rolling method , 2013 .

[5]  Xin Zhao,et al.  Effect of Initial Microstructure on Warm Deformation Behavior of 45 Steel , 2012 .

[6]  J. Lin,et al.  Cold rolled Fe-6.5 wt. % Si alloy foils with high magnetic induction , 2012 .

[7]  Huadong Fu,et al.  Effects of precipitated phase and order degree on bending properties of an Fe-6.5 wt%Si alloy with columnar grains , 2011 .

[8]  Huadong Fu,et al.  Improvement of magnetic properties of an Fe–6.5 wt.% Si alloy by directional solidification , 2011 .

[9]  X. Bi,et al.  Fabrication and magnetic properties of Fe–6.5% Si alloys by magnetron sputtering method , 2010 .

[10]  H. Bei,et al.  Improvement of magnetic properties of an Fe-6.5 wt. % Si alloy by directional recrystallization , 2008 .

[11]  K. Lu,et al.  Microstructural evolution and nanostructure formation in copper during dynamic plastic deformation at cryogenic temperatures , 2008 .

[12]  Zhang Lianmeng,et al.  Fabrication of Fe-6.5wt% Si bulk by spark plasma sintering , 2005 .

[13]  T. Hsu,et al.  Electronic structure and ferromagnetic effect in Ni2MnGa alloy , 2005 .

[14]  M. Komatsubara,et al.  Newly developed electrical steel for high-frequency use , 2002 .

[15]  Y. Tanaka,et al.  Magnetic properties of 6.5% Si-Fe sheet and its applications , 1990 .

[16]  U. F. Kocks,et al.  Slip geometry in partially constrained deformation , 1982 .

[17]  L. Rémy.  Temperature variation of the intrinsic stacking fault energy of a high manganese austenitic steel , 1977 .