Modeling of nonlinear micromechanical resonators and their simulation with the harmonic‐balance method

A model for a micromachined electrostatically driven high-Q beam resonator is constructed of nonlinear voltage-controlled current and charge sources. Its characteristics are simulated with the harmonic-balance method in the RF simulation program APLAC demonstrating both the spring softening and hardening effects in the capacitive transducer and in the nonlinear mass-spring systems. Measured large-signal frequency-domain transfer characteristics of a test resonator structure at various signal levels were accurately reproduced by model simulations. © 2001 John Wiley & Sons, Inc. Int J RF and Microwave CAE 11: 310–321, 2001.

[1]  Timo Veijola,et al.  APLAC - object-oriented circuit simulator and design tool , 1996 .

[2]  Eurosensors.  Transducers '95 = Eurosensors IX : The 8th International Conference on Solid-State Sensors and Actuators, and Eurosensors IX. June 25-29, 1995, Stockholm, Sweden : digest of technical papers , 1995 .

[3]  S. D. Senturia,et al.  CAD challenges for microsensors, microactuators, and microsystems , 1998, Proc. IEEE.

[4]  Gabriel M. Rebeiz,et al.  Micromachined devices for wireless communications , 1998, Proc. IEEE.

[5]  Miko Elwenspoek,et al.  Nonlinearity and Hysteresis of Resonant Strain Gauges , 1998 .

[6]  R. Howe,et al.  Microelectromechanical filters for signal processing , 1992, [1992] Proceedings IEEE Micro Electro Mechanical Systems.

[7]  L. Rayleigh,et al.  The theory of sound , 1894 .

[8]  Johan Scholliers,et al.  A SPICE-based library for mechatronic systems , 1995, Proceedings of ISCAS'95 - International Symposium on Circuits and Systems.

[9]  Reinoud F. Wolffenbuttel,et al.  Modeling the mechanical behavior of bulk-micromachined silicon accelerometers , 1998 .

[10]  H. Tilmans.  Equivalent circuit representation of electromechanical transducers: I. Lumped-parameter systems , 1996 .

[11]  H. Tilmans.  Equivalent circuit representation of electromechanical transducers: II. Distributed-parameter systems , 1997 .

[12]  Michael Kraft,et al.  Closed Loop Silicon Accelerometers , 1998 .

[13]  T. Kenny,et al.  Quality factors in micron- and submicron-thick cantilevers , 2000, Journal of Microelectromechanical Systems.

[14]  Robert L. Mullen,et al.  Theoretical modeling of microfabricated beams with elastically restrained supports , 1993 .

[15]  Tomi Mattila,et al.  Electromechanical analysis of micromechanical SOI-fabricated RF resonators , 2000 .