Die-Attach Materials for High Temperature Applications in Microelectronics Packaging: Materials, Processes, Equipment, and Reliability

[1]  R. Doring,et al.  Electro-thermo-mechanical analyses on silver sintered IGBT-module reliability in power cycling , 2015, 2015 16th International Conference on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Microsystems.

[2]  J. Wilde,et al.  Die-attachment technologies for high-temperature applications of Si and SiC-based power devices , 2015, 2015 IEEE 65th Electronic Components and Technology Conference (ECTC).

[3]  Xin Li,et al.  Reliability comparison between SAC305 joint and sintered nanosilver joint at high temperatures for power electronic packaging , 2014 .

[4]  Klaus-Dieter Lang,et al.  Dependency of the porosity and the layer thickness on the reliability of Ag sintered joints during active power cycling , 2015, 2015 IEEE 65th Electronic Components and Technology Conference (ECTC).

[5]  A. Syed.  Accumulated creep strain and energy density based thermal fatigue life prediction models for SnAgCu solder joints , 2004, 2004 Proceedings. 54th Electronic Components and Technology Conference (IEEE Cat. No.04CH37546).

[6]  M. Thoben,et al.  Power Cycling at High Temperature Swings of Modules with Low Temperature Joining Technique , 2006, 2006 IEEE International Symposium on Power Semiconductor Devices and IC's.

[7]  Brian Moran,et al.  Energy release rate along a three-dimensional crack front in a thermally stressed body , 1986, International Journal of Fracture.

[8]  Bruno Allard,et al.  Migration issues in sintered-silver die attaches operating at high temperature , 2013, Microelectron. Reliab..

[9]  Xuejun Fan,et al.  Effect of finite element modeling techniques on solder joint fatigue life prediction of flip-chip BGA packages , 2006, 56th Electronic Components and Technology Conference 2006.

[10]  Xin Li,et al.  Applying viscoplastic constitutive models to predict ratcheting behavior of sintered nanosilver lap-shear joint , 2014 .

[11]  G. Lu,et al.  Evolution of curvature under thermal cycling in sandwich assembly bonded by sintered nanosilver paste , 2013 .

[12]  C. Gobl,et al.  Low temperature sinter technology die attachment for power electronic applications , 2010, 2010 6th International Conference on Integrated Power Electronics Systems.

[13]  S. T. Chua,et al.  Microstructural studies and bonding strength of pressureless sintered nano-silver joints on silver, direct bond copper (DBC) and copper substrates aged at 300 °C , 2016 .

[14]  Chris Bailey,et al.  Review of methods to predict solder joint reliability under thermo-mechanical cycling , 2007 .

[15]  Kojiro F. Kobayashi,et al.  Bonding of Various Metals Using Ag Metallo-Organic Nanoparticles-A Novel Bonding Process Using Ag Metallo-Organic Nanoparticles- , 2006 .

[16]  W. Brocks,et al.  Reliable J-Values - Numerical Aspects of the Path-Dependence of the J-Integral in Incremental Plasticity , 2003 .

[17]  Satya N. Atluri,et al.  Incremental path-independent integrals in inelastic and dynamic fracture mechanics , 1984 .

[18]  Xinfa Chen,et al.  Temperature-Dependent Dwell-Fatigue Behavior of Nanosilver Sintered Lap Shear Joint , 2016 .

[19]  R. Darveaux.  Effect of simulation methodology on solder joint crack growth correlation , 2000, 2000 Proceedings. 50th Electronic Components and Technology Conference (Cat. No.00CH37070).

[20]  H. S. Lamba,et al.  The J-integral applied to cyclic loading , 1975 .

[21]  J. Botsis,et al.  Reliability Analysis of Lead-free Solders , 2008, WCE 2008.

[22]  Samjid H. Mannan,et al.  Microstructure evolution during 300 °C storage of sintered Ag nanoparticles on Ag and Au substrates , 2014 .

[23]  Guo-Quan Lu,et al.  Study on high temperature bonding reliability of sintered nano-silver joint on bare copper plate , 2015, Microelectron. Reliab..

[24]  K. Suganuma,et al.  Microstructural stability of Ag sinter joining in thermal cycling , 2013, Journal of Materials Science: Materials in Electronics.

[25]  Xu Chen,et al.  Tensile Behaviors and Ratcheting Effects of Partially Sintered Chip-Attachment Films of a Nanoscale Silver Paste , 2008 .

[26]  Xu Chen,et al.  Applying Anand model to low-temperature sintered nanoscale silver paste chip attachment , 2009 .

[27]  C. C. Lee,et al.  Thermal-mechanical behavior of the bonding wire for a power module subjected to the power cycling test , 2011, Microelectron. Reliab..

[28]  Xu Chen,et al.  Effect of Oxygen Partial Pressure on Silver Migration of Low-Temperature Sintered Nanosilver Die-Attach Material , 2011, IEEE Transactions on Device and Materials Reliability.

[29]  G. Lu,et al.  Creep properties of low-temperature sintered nano-silver lap shear joints , 2013 .

[30]  T. Anderson,et al.  Fracture mechanics - Fundamentals and applications , 2017 .

[31]  G. Lu,et al.  Roles of palladium particles in enhancing the electrochemical migration resistance of sintered nano-silver paste as a bonding material , 2017 .

[32]  A. Lindemann,et al.  Double-sided low-temperature joining technique for power cycling capability at high temperature , 2005, 2005 European Conference on Power Electronics and Applications.

[33]  Y. Mei,et al.  Reliability of pressureless sintered nanosilver for attaching IGBT devices , 2016, 2016 International Conference on Electronics Packaging (ICEP).

[34]  Seung-Boo Jung,et al.  Evaluation of Electrochemical Migration on Flexible Printed Circuit Boards with Different Surface Finishes , 2009 .

[35]  Jing‐Chie Lin,et al.  Resistance to Silver Electrolytic Migration for Thick‐Film Conductors Prepared from Mixed and Alloyed Powders of Ag‐15Pd and Ag‐30Pd , 1997 .

[36]  H. Reichl,et al.  Fatigue life models for SnAgCu and SnPb solder joints evaluated by experiments and simulation , 2003, 53rd Electronic Components and Technology Conference, 2003. Proceedings..

[37]  Xu Chen,et al.  Ratcheting behavior of sandwiched assembly joined by sintered nanosilver for power electronics packaging , 2013, Microelectron. Reliab..

[38]  R. Dudek,et al.  Investigations on power cycling induced fatigue failure of IGBTs with silver sinterea interconnects , 2015, 2015 European Microelectronics Packaging Conference (EMPC).

[39]  Tao Wang,et al.  Uniaxial ratcheting and fatigue behaviors of low-temperature sintered nano-scale silver paste at room and high temperatures , 2010 .

[40]  Guo-Quan Lu,et al.  Finite-element modeling of thermal and thermomechanical behavior for three-dimensional packaging of power electronics modules , 2000, ITHERM 2000. The Seventh Intersociety Conference on Thermal and Thermomechanical Phenomena in Electronic Systems (Cat. No.00CH37069).

[41]  Xu Chen,et al.  Fatigue and dwell-fatigue behavior of nano-silver sintered lap-shear joint at elevated temperature , 2013, Microelectron. Reliab..

[42]  R. Doring,et al.  Combined experimental- and FE-studies on sinter-Ag behaviour and effects on IGBT-module reliability , 2014, 2014 15th International Conference on Thermal, Mechanical and Mulit-Physics Simulation and Experiments in Microelectronics and Microsystems (EuroSimE).

[43]  G. Lu,et al.  Mechanism of Migration of Sintered Nanosilver at High Temperatures in Dry Air for Electronic Packaging , 2014, IEEE Transactions on Device and Materials Reliability.

[44]  Xu Chen,et al.  High temperature ratcheting behavior of nano-silver paste sintered lap shear joint under cyclic shear force , 2013, Microelectron. Reliab..

[45]  G. Lu,et al.  Thermomechanical reliability of low-temperature sintered silver die-attachment , 2006, Thermal and Thermomechanical Proceedings 10th Intersociety Conference on Phenomena in Electronics Systems, 2006. ITHERM 2006..

[46]  Xu Chen,et al.  Effect of joint sizes of low-temperature sintered nano-silver on thermal residual curvature of sandwiched assembly , 2012 .

[47]  Yoshiharu Mutoh,et al.  Low cycle fatigue behavior and mechanisms of a eutectic Sn-Pb solder 63Sn/37Pb , 2002 .

[48]  Guna S Selvaduray,et al.  Solder joint fatigue models: review and applicability to chip scale packages , 2000 .

[49]  T. Ogura,et al.  Effects of Au and Pd Additions on Joint Strength, Electrical Resistivity, and Ion-Migration Tolerance in Low-Temperature Sintering Bonding Using Ag2O Paste , 2012, Journal of Electronic Materials.

[50]  Chris Bailey,et al.  Design for reliability of power electronics modules , 2009, Microelectron. Reliab..

[51]  A. Waag,et al.  Analysis and Modeling of Thermomechanically Improved Silver-Sintered Die-Attach Layers Modified by Additives , 2011, IEEE Transactions on Components, Packaging and Manufacturing Technology.

[52]  Xu Chen,et al.  Three-Dimensional Visualization of the Crack-Growth Behavior of Nano-Silver Joints During Shear Creep , 2015, Journal of Electronic Materials.

[53]  L. C. Hall,et al.  A Review of Corrosion Failure Mechanisms during Accelerated Tests Electrolytic Metal Migration , 1987 .

[54]  F. Ouyang,et al.  Electrochemical Migration of Fine-Pitch Nanopaste Ag Interconnects , 2016, Journal of Electronic Materials.

[55]  Seung-Boo Jung,et al.  Electrochemical migration of directly printed Ag electrodes using Ag paste with epoxy binder , 2013 .

[56]  K. S. Siow,et al.  Are Sintered Silver Joints Ready for Use as Interconnect Material in Microelectronic Packaging? , 2014, Journal of Electronic Materials.

[57]  L. Mendizabal,et al.  Survey of High-Temperature Reliability of Power Electronics Packaging Components , 2015, IEEE Transactions on Power Electronics.

[58]  Otmar Kolednik,et al.  J-integral and crack driving force in elastic–plastic materials , 2008 .

[59]  G. Lu,et al.  Correlation between interfacial microstructure and bonding strength of sintered nanosilver on ENIG and electroplated Ni/Au direct-bond-copper (DBC) substrates , 2016 .

[60]  L. Anand.  Constitutive equations for hot-working of metals , 1985 .

[61]  Bernd Michel,et al.  Reliability investigations for high temperature interconnects , 2014 .

[62]  Andreas Fix,et al.  Failure mechanisms of sintered silver interconnections for power electronic applications , 2013, 2013 IEEE 63rd Electronic Components and Technology Conference.

[63]  Jing-Chie Lin,et al.  On the resistance of silver migration in Ag-Pd conductive thick films under humid environment and applied d.c. field , 1996 .

[64]  Suresh K. Sitaraman,et al.  Thermo-mechanical analysis of solder joint fatigue and creep in a flip chip on board package subjected to temperature cycling loading , 1998, 1998 Proceedings. 48th Electronic Components and Technology Conference (Cat. No.98CH36206).

[65]  M. Thoben,et al.  Aging of new Interconnect-Technologies of Power-Modules during Power-Cycling , 2014 .

[66]  Philippe Godignon,et al.  A Survey of Wide Bandgap Power Semiconductor Devices , 2014, IEEE Transactions on Power Electronics.

[67]  S. Haumann,et al.  Novel bonding and joining technology for power electronics - Enabler for improved lifetime, reliability, cost and power density , 2013, 2013 Twenty-Eighth Annual IEEE Applied Power Electronics Conference and Exposition (APEC).

[68]  N. Lee,et al.  Achieving high reliability via pressureless sintering of nano-Ag paste for die-attach , 2015, 2015 16th International Conference on Electronic Packaging Technology (ICEPT).

[69]  M. Jeong,et al.  Electrical and electrochemical migration characteristics of Ag/Cu nanopaste patterns. , 2014, Journal of nanoscience and nanotechnology.

[70]  J. Wilde,et al.  Applying Anand Model to Represent the Viscoplastic Deformation Behavior of Solder Alloys , 2001 .

[71]  G. Lu,et al.  High-Temperature Creep Behavior of Low-Temperature-Sintered Nano-Silver Paste Films , 2012, Journal of Electronic Materials.

[72]  G. Lu,et al.  Uniaxial ratcheting behavior of sintered nanosilver joint for electronic packaging , 2014 .

[73]  Xin Li,et al.  Thermo-Mechanical Reliability of Double-Sided IGBT Assembly Bonded by Sintered Nanosilver , 2014, IEEE Transactions on Device and Materials Reliability.

[74]  Xu Chen,et al.  Uniaxial ratcheting behavior of anisotropic conductive adhesive film at elevated temperature , 2011 .

[75]  G. Lu,et al.  Migration of Sintered Nanosilver on Alumina and Aluminum Nitride Substrates at High Temperatures in Dry Air for Electronic Packaging , 2014, IEEE Transactions on Device and Materials Reliability.

[76]  J. Wilde,et al.  Assessment of thermo-mechanical stresses in Low Temperature Joining Technology , 2012, 2012 13th International Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Microsystems.

[77]  Chris Bailey,et al.  Sintered silver finite element modelling and reliability based design optimisation in power electronic module , 2015, Microelectron. Reliab..

[78]  L. Frey,et al.  Evolution of shear strength and microstructure of die bonding technologies for high temperature applications during thermal aging , 2010, 2010 12th Electronics Packaging Technology Conference.

[79]  J. Rice.  A path-independent integral and the approximate analysis of strain , 1968 .

[80]  Y. Kariya,et al.  Low-Cycle Fatigue Life and Fatigue Crack Propagation of Sintered Ag Nanoparticles , 2017, Journal of Electronic Materials.

[81]  Khai D. T. Ngo,et al.  Temperature Cycling Reliability Assessment of Die Attachment on Bare Copper by Pressureless Nanosilver Sintering , 2015, IEEE Transactions on Device and Materials Reliability.

[82]  P. Lall,et al.  Determination of Anand constants for SAC solders using stress-strain or creep data , 2012, 13th InterSociety Conference on Thermal and Thermomechanical Phenomena in Electronic Systems.

[83]  Xin Li,et al.  Reliability Evaluation of Multichip Phase-Leg IGBT Modules Using Pressureless Sintering of Nanosilver Paste by Power Cycling Tests , 2017, IEEE Transactions on Power Electronics.

[84]  G. Lu,et al.  Effects of DC bias and spacing on migration of sintered nanosilver at high temperatures for power electronic packaging , 2013, 2013 14th International Conference on Electronic Packaging Technology.

[85]  John R. Rice,et al.  Mathematical analysis in the mechanics of fracture , 1968 .