Dynamic stability of off-road vehicles

This paper offers a unified measure for dynamic stability of off-road vehicles that accounts for the tendency to tipover, slide, or loose contact with ground during static equilibrium and in motion. The contacts between the vehicle and ground are assumed rigid, and all wheels are assumed active. The dynamic stability measure is determined by computing the range of velocity and acceleration of the vehicle's center of mass that satisfies a set of dynamics constraints. The upper velocity limit serves as a dynamic stability measure, whereas the acceleration limit at zero speed serves as a static stability measure. In this paper, we demonstrate the approach for a four-wheel drive planar vehicle.

[1]  Zvi Shiller.  Obstacle traversal for space exploration , 2000, Proceedings 2000 ICRA. Millennium Conference. IEEE International Conference on Robotics and Automation. Symposia Proceedings (Cat. No.00CH37065).

[2]  Evangelos Papadopoulos,et al.  The Force-Angle Measure of Tipover Stability Margin for Mobile Manipulators , 2000 .

[3]  S. V. Sreenivasan,et al.  Stability and traction control of an actively actuated micro-rover , 1994, J. Field Robotics.

[4]  Edward Tunstel,et al.  Planetary Rover Developments Supporting Mars Exploration, Sample Return and Future Human-Robotic Colonization , 2003, Auton. Robots.

[5]  Steven Dubowsky,et al.  Mobile robot kinematic reconfigurability for rough terrain , 2000, SPIE Optics East.

[6]  Zvi Shiller,et al.  Dynamic motion planning of autonomous vehicles , 1991, IEEE Trans. Robotics Autom..

[7]  Shane Farritor,et al.  Physics-based planning for planetary exploration , 1998, Proceedings. 1998 IEEE International Conference on Robotics and Automation (Cat. No.98CH36146).