Flow Analysis as Advanced Branch of Flow Chemistry

The effectiveness of the carrying out chemical reactions, especially in terms of syntheses conducted in the laboratory or on a technological scale, is a primary target of the optimization of chemical conditions and physicochemical parameters of a given process. Since the publication of pioneering works in the beginning of 1970s, it is an increasingly accepted concept that carrying out chemical reactions in continuously flowing streams rather than in batch configuration has numerous advantages, hence flow chemistry can be at present considered as a separate and rapidly increasing area of modern chemistry. Four decades of the development of those methods resulted in thousands of original research works, numerous reported attractive technologies, and also in the presence of numerous specialized instruments on the market.

[1]  M. Segundo,et al.  Universal approach for mesofluidic handling of bead suspensions in lab-on-valve format. , 2011, Talanta.

[2]  Graham B Jones,et al.  Microwave and continuous flow technologies in drug discovery , 2012, Expert opinion on drug discovery.

[3]  C. Brett,et al.  Batch injection analysis with adsorptive stripping voltammetry for the determination of traces of nickel and cobalt , 1996 .

[4]  Cyril Aymonier,et al.  Supercritical microfluidics: Opportunities in flow-through chemistry and materials science , 2012 .

[5]  Stuart J. Chalk,et al.  Flow Analysis and the Internet – Databases, Instrumentation, and Resources , 2008 .

[6]  D P Glavin,et al.  Microfabricated capillary electrophoresis amino acid chirality analyzer for extraterrestrial exploration. , 1999, Analytical chemistry.

[7]  B. F. Rocks,et al.  Flow-injection analysis , 1982 .

[8]  Z. Fang Flow Injection Separation and Preconcentration , 1993 .

[9]  L. Skeggs An automatic method for colorimetric analysis. , 1957, American journal of clinical pathology.

[10]  L. Campanella,et al.  Chemical speciation by flow-injection analysis. A review. , 1996, Talanta.

[11]  Joseph Wang,et al.  Batch injection with potentiometric detection , 1991 .

[12]  Elo Harald Hansen,et al.  The impact of flow injection on modern chemical analysis: has it fulfilled our expectations? And where are we going? , 2004, Talanta.

[13]  C. Culbertson,et al.  Paper-based microfluidic devices for analysis of clinically relevant analytes present in urine and saliva , 2010, Analytical and bioanalytical chemistry.

[14]  Ingrid A Lua,et al.  Replacing immunoassays for mephedrone, ketamines and six amphetamine-type stimulants with flow injection analysis tandem mass spectrometry. , 2012, Journal of analytical toxicology.

[15]  Joseph Wang,et al.  Batch injection stripping voltammetry of trace metals , 1992 .

[16]  High-throughput flow injection analysis of labeled peptides in cellular samples - ICP-MS analysis versus fluorescence based detection. , 2011, International journal of mass spectrometry.

[17]  P. Renaud,et al.  Ionic transport phenomena in nanofluidics: experimental and theoretical study of the exclusion-enrichment effect on a chip. , 2005, Nano letters.

[18]  S. Garrigues,et al.  Recent developments in flow-analysis vibrational spectroscopy , 2007 .

[19]  D. B. Hibbert,et al.  Flow-injection analysis wit potentiometric detection for the speciation of fluoride and calcium , 1998 .

[20]  D. Carroll Continuous-flow salt gradient dialysis for the preparation of polynucleotide-polypeptide complexes. , 1971, Analytical biochemistry.

[21]  M. Zenki,et al.  Repetitive determination of ascorbic acid using iron(III)-1.10-phenanthroline-peroxodisulfate system in a circulatory flow injection method. , 2004, Talanta.

[22]  M. D. Castro The role of flow injection analysis in speciation studies , 1992 .

[23]  Elo Harald Hansen,et al.  Integrated microconduits for flow injection analysis , 1984 .

[24]  Geoffrey A. Ozin,et al.  Dream Nanomachines , 2005 .

[25]  M Valcárcel,et al.  Analytical nanoscience and nanotechnology today and tomorrow , 2008, Analytical and bioanalytical chemistry.

[26]  Richard B. Fair,et al.  Digital microfluidics: is a true lab-on-a-chip possible? , 2007 .

[27]  Jaromir Růžička,et al.  Flow injection analysis , 1981 .

[28]  Kees Hollaar,et al.  Industrial and Environmental Applications of Continuous Flow Analysis , 2008 .

[29]  P. Kościelniak,et al.  Flow injection titration basing on the merging-zone technique. , 2009, Talanta.

[30]  R. Ismagilov,et al.  Detecting bacteria and determining their susceptibility to antibiotics by stochastic confinement in nanoliter droplets using plug-based microfluidics. , 2008, Lab on a chip.

[31]  S. Howitz,et al.  Thin layer copper ISE for fluidic microsystem , 2003 .

[32]  J. Ruzicka Lab-on-valve: universal microflow analyzer based on sequential and bead injection , 2000 .

[33]  R. Łobiński,et al.  Flow-injection sample preparation for organotin speciation analysis of water by capillary gas chromatography-microwave-induced plasma atomic emission spectrometry , 1993 .

[34]  J Ruzicka,et al.  Jet ring cell: a tool for flow injection spectroscopy and microscopy on a renewable solid support. , 1993, Analytical chemistry.

[35]  C. Brett,et al.  Anodic stripping voltammetry of trace metals by batch injection analysis , 1996 .

[36]  Sergio C. Nanita High-throughput chemical residue analysis by fast extraction and dilution flow injection mass spectrometry. , 2011, The Analyst.

[37]  G. Whitesides,et al.  Three-dimensional microfluidic devices fabricated in layered paper and tape , 2008, Proceedings of the National Academy of Sciences.

[38]  Claire E. Lenehan,et al.  Sequential injection analysis: an alternative approach to process analytical chemistry , 1999 .

[39]  Microfluidics for Clinical Diagnostics— Promise and Current Reality , 2004 .

[40]  Dermot Diamond,et al.  Inverted poly(vinyl chloride)–liquid membrane ion-selective electrodes for high-speed batch injection potentiometric analysis , 1993 .

[41]  Han Gardeniers,et al.  Micro- and nanofluidic devices for environmental and biomedical applications , 2004 .

[42]  W. B. Furman,et al.  Continuous Flow Analysis , 2020 .

[43]  Horacio A. Mottola,et al.  Enzymic substrate determination in closed flow-through systems by sample injection and amperometric monitoring of dissolved oxygen levels , 1978 .

[44]  K. Yoshimura,et al.  Ion-exchanger phase absorptiometry for trace analysis. , 1985, Talanta.

[45]  José L. F. C. Lima,et al.  Sequential Injection Analysis Hyphenated with Other Flow Techniques: A Review , 2011 .

[46]  D. Sinton,et al.  Hydrodynamic dispersion of neutral solutes in nanochannels: the effect of streaming potential , 2007 .

[47]  J. Eijkel,et al.  Nanofluidics: what is it and what can we expect from it? , 2005 .

[48]  M. Trojanowicz,et al.  Enhancement of selectivity of electrochemical detectors by kinetic discrimination in flow‐injection systems , 2000 .

[49]  Juewen Liu,et al.  Miniaturized lead sensor based on lead-specific DNAzyme in a nanocapillary interconnected microfluidic device. , 2005, Environmental science & technology.

[50]  M. Trojanowicz Advances in Flow Analysis , 2008 .

[51]  J. V. van Staden,et al.  Determination of Lead(II), Copper(II), Zinc(II), Cobalt(II), Cadmium(II), Iron(III), Mercury(II) using sequential injection extractions. , 2004, Talanta.

[52]  Marek Trojanowicz,et al.  Flow Injection Analysis: Instrumentation and Applications , 2000 .

[53]  A. van den Berg,et al.  Monolayer-functionalized microfluidics devices for optical sensing of acidity. , 2005, Lab on a chip.

[54]  Xingguo Chen,et al.  The combination of flow injection with electrophoresis using capillaries and chips , 2004, Electrophoresis.

[55]  A. O. Rangel,et al.  A review on sequential injection methods for water analysis. , 2009, Analytica chimica acta.

[56]  P. Kościelniak,et al.  Novel approaches to analysis by flow injection gradient titration. , 2007, Analytica chimica acta.

[57]  P. Solich,et al.  Sequential injection chromatographic determination of paracetamol, caffeine, and acetylsalicylic acid in pharmaceutical tablets. , 2004, Journal of separation science.

[58]  J Wang,et al.  On-valve electrochemical detector for high-speed flow injection analysis. , 1990, Analytical chemistry.

[59]  A. Helmicki,et al.  An integrated microfluidic biochemical detection system for protein analysis with magnetic bead-based sampling capabilities. , 2002, Lab on a chip.

[60]  N. A. Santagati,et al.  A rapid profiling of gallotannins and flavonoids of the aqueous extract of Rhus coriaria L. by flow injection analysis with high-resolution mass spectrometry assisted with database searching. , 2013, Journal of pharmaceutical and biomedical analysis.

[61]  J. Ruzicka,et al.  Flow injection analyses , 1975 .

[62]  Katsunori Tanaka,et al.  Acid-mediated reactions under microfluidic conditions: A new strategy for practical synthesis of biofunctional natural products , 2009, Beilstein journal of organic chemistry.

[63]  Carla B. Swearingen,et al.  Direct immobilization of Fab' in nanocapillaries for manipulating mass-limited samples. , 2007, Journal of the American Chemical Society.

[64]  Z. Zhang,et al.  Chemiluminescence microfluidic system sensor on a chip for determination of glucose in human serum with immobilized reagents. , 2003, Talanta: The International Journal of Pure and Applied Analytical Chemistry.

[65]  Joseph Wang,et al.  Batch injection analysis , 1991 .

[66]  J. Ruzicka,et al.  Sequential injection: a new concept for chemical sensors, process analysis and laboratory assays , 1990 .

[67]  D. Burns Flow injection separation and preconcentration : VCH, Weinheim, 1993 (ISBN 3-527-28308-0). xiv + 259 pp. Price DM148.00. , 1994 .

[68]  A. Araújo,et al.  Sequential injection analysis using electrochemical detection: A review , 2005 .

[69]  Ernő Pungor,et al.  Application of silicone rubber-based graphite electrodes for continuous flow measurements : Part II. Voltammetric study of active substances injected into electrolyte streams , 1970 .

[70]  Z. Zhi Segmental flow injection analysis, a hybrid technique of segmented continuous flow analysis and flow injection analysis , 1998 .

[71]  Joseph Wang,et al.  Batch Injection Analysis with Thermistor Sensing Devices , 1991 .

[72]  S. Mishra,et al.  Electrodialytic reagent introduction in flow systems. , 2010, Analytical chemistry.

[73]  Jianhua Wang Lab-on-valve mesofluidic analytical system and its perspectives as a “world-to-chip” front-end , 2005, Analytical and bioanalytical chemistry.

[74]  H. Craighead,et al.  Separation of long DNA molecules in a microfabricated entropic trap array. , 2000, Science.

[75]  C. Brett,et al.  Nafion-coated mercury thin film electrodes for batch-injection analysis with anodic stripping voltammetry. , 1996, Talanta.

[76]  J. Sweedler,et al.  Nanofluidics in chemical analysis. , 2010, Chemical Society reviews.

[77]  M. Wieczorek,et al.  Versatile flow injection manifold for analytical calibration. , 2007, Analytica chimica acta.

[78]  V. Hessel,et al.  Flow chemistry using milli- and microstructured reactors-from conventional to novel process windows. , 2010, Bioorganic & medicinal chemistry.

[79]  P. E. Hare,et al.  Rapid analysis of discrete samples: the use of nonsegmented, continuous flow. , 1976, Analytical biochemistry.

[80]  Integrated chemical systems on microchips for analysis and assay. Potential future, mobile high-performance detection system for chemical weapons , 2002 .

[81]  Nam-Trung Nguyen,et al.  Fabrication of planar nanofluidic channels in a thermoplastic by hot-embossing and thermal bonding. , 2007, Lab on a chip.

[82]  M. Packirisamy,et al.  Microfluidics-Nano-Integration for Synthesis and Sensing , 2012 .

[83]  P. Chocholouš,et al.  An overview of sequential injection chromatography. , 2007, Analytica chimica acta.

[84]  M. Trojanowicz,et al.  Flow-injection sample preconcentration for ion-pair chromatography of trace metals in waters. , 2003, Water research.

[85]  Xingguo Chen,et al.  The combination of flow injection with electrophoresis using capillaries and chips , 2009, Electrophoresis.

[86]  Jeremy L. Steinbacher,et al.  Simplified Mesofluidic Systems for the Formation of Micron to Millimeter Droplets and the Synthesis of Materials , 2012, Journal of Flow Chemistry.

[87]  M. Nakao,et al.  Liquid Filling Method for Nanofluidic Channels Utilizing the High Solubility of CO_2 , 2006, Analytical sciences : the international journal of the Japan Society for Analytical Chemistry.

[88]  I. staff Front end , 2002 .

[89]  A. Scheer,et al.  Assay Development and Screening of a Serine/Threonine Kinase in an On-Chip Mode Using Caliper Nanofluidics Technology , 2006, Journal of biomolecular screening.

[90]  G. Christian,et al.  Reversible optosensing in packed flow-through detectors: flow injection or chromatography? , 1990 .

[91]  Jan Lichtenberg,et al.  Sample pretreatment on microfabricated devices. , 2002, Talanta.

[92]  P. Dasgupta,et al.  Sequential injection analysis in capillary format with an electroosmotic pump. , 1994, Talanta.

[93]  Spas D. Kolev,et al.  Advances in flow injection analysis and related techniques , 2008 .

[94]  C. Brett,et al.  Batch-injection stripping voltammetry (tube-less flow-injection analysis) of trace metals with on-line sample pretreatment. , 2005, Talanta.

[95]  R. Kennedy,et al.  Parallel electrophoretic analysis of segmented samples on chip for high-throughput determination of enzyme activities. , 2010, Analytical chemistry.

[96]  V. Cerdà,et al.  Fully automated lab-on-valve-multisyringe flow injection analysis-ICP-MS system: an effective tool for fast, sensitive and selective determination of thorium and uranium at environmental levels exploiting solid phase extraction , 2012 .

[97]  M. P. Callao,et al.  Self-configuration of sequential injection analytical systems , 1995 .

[98]  Manuel Miró,et al.  Recent advances and future prospects of mesofluidic lab-on-a-valve platforms in analytical sciences--a critical review. , 2012, Analytica chimica acta.

[99]  Jianhua Wang,et al.  Coupling on-line preconcentration by ion-exchange with ETAAS: A novel flow injection approach based on the use of a renewable microcolumn as demonstrated for the determination of nickel in environmental and biological samples , 2000 .

[100]  M. Valcárcel,et al.  Highly selective and non-conventional sorbents for the determination of biomarkers in urine by liquid chromatography , 2010, Analytical and bioanalytical chemistry.

[101]  G. Palleschi,et al.  Investigation of the batch injection analysis technique with amperometric biocatalytic electrodes using a modified small-volume cell , 1993 .

[102]  R. Stefan,et al.  Chemical speciation by sequential injection analysis: an overview. , 2004, Talanta.

[103]  S. Jeanneret,et al.  Microsystems for Flow Injection Analysis , 1993 .

[104]  L. Skeggs Persistence... and prayer: from the artificial kidney to the AutoAnalyzer. , 2000, Clinical chemistry.

[105]  J. Sweedler,et al.  Nanocapillary arrays effect mixing and reaction in multilayer fluidic structures. , 2004, Angewandte Chemie.

[106]  J. Wegner,et al.  Flow Chemistry – A Key Enabling Technology for (Multistep) Organic Synthesis , 2012 .

[107]  M. Hayat Instrumentation and applications , 2008 .