Dominant factor controlling the fracture mode in nanostructured Cu/Cr multilayer films

It was recently suggested that the fracture mode in nanostructured metallic multilayer films (NMFs) is related to the strengthening mechanism. Here, based on extensive experimental examinations on the nanoscale damage of Cu/Cr NMFs with wide ranges of modulation period (from 10 nm to 250 nm) and modulation ratio (from 0.11 to 3.0), we conclude that the dominant factor controlling the fracture mode in NMFs is the constraint effect from the ductile layer on the brittle layer, rather than the strengthening mechanism. This constraint effect is quantitatively assessed using a fracture mechanism-based micromechanical model, which yields predictions in broad agreement with the experimental observations.

[1]  Amit Misra,et al.  Length-scale-dependent deformation mechanisms in incoherent metallic multilayered composites , 2005 .

[2]  László Péter,et al.  Electrodeposited multilayer films with giant magnetoresistance (GMR): Progress and problems , 2010 .

[3]  W. Nix,et al.  Microstructure and nanoindentation hardness of Al/Al3Sc multilayers , 2003 .

[4]  Amit Misra,et al.  Deformability of ultrahigh strength 5 nm Cu/Nb nanolayered composites , 2008 .

[5]  Gang Liu,et al.  Scaling of the ductility with yield strength in nanostructured Cu/Cr multilayer films , 2010 .

[6]  J. Embury,et al.  On dislocation storage and the mechanical response of fine scale microstructures , 1994 .

[7]  Andrew G. Glen,et al.  APPL , 2001 .

[8]  Evan Ma,et al.  A maximum in ductility and fracture toughness in nanostructured Cu/Cr multilayer films , 2010 .

[9]  Zhigang Suo,et al.  Cleavage due to dislocation confinement in layered materials , 1994 .

[10]  Xiangdong Ding,et al.  Thickness dependent critical strain in submicron Cu films adherent to polymer substrate , 2007 .

[11]  S. I. Rao,et al.  Atomistic simulations of dislocation–interface interactions in the Cu-Ni multilayer system , 2000 .

[12]  A. Misra,et al.  Deformation Behavior of Nanostructured Metallic Multilayers , 2001 .

[13]  F. Hauser,et al.  Deformation and Fracture Mechanics of Engineering Materials , 1976 .

[14]  A. Hamza,et al.  Ductile crystalline–amorphous nanolaminates , 2007, Proceedings of the National Academy of Sciences.

[15]  Amit Misra,et al.  Plastic flow stability of metallic nanolaminate composites , 2007 .

[16]  W. Nix,et al.  A model for dislocation behavior during deformation of Al/Al3Sc (fcc/L12) metallic multilayers , 2003 .

[17]  E. Arzt.  Size effects in materials due to microstructural and dimensional constraints: a comparative review , 1998 .

[18]  F. Spaepen,et al.  Suppression of the shear band instability during plastic flow of nanometer-scale confined metallic glasses , 2007 .

[19]  T. Foecke,et al.  Deformation and fracture in microlaminates , 1996 .

[20]  Yong Li,et al.  Understanding nanoscale damage at a crack tip of multilayered metallic composites , 2008 .

[21]  J. Koehler.  Attempt to Design a Strong Solid , 1970 .

[22]  P. Anderson,et al.  Hall-Petch relations for multilayered materials , 1995 .