A particle-resolved 3D finite element model to study the effect of cathode microstructure on the behavior of lithium ion batteries

Abstract This manuscript presents the formulation and implementation of a particle-resolved 3D finite element (3DFE) model to study the effect of cathode microstructure on the electrochemical and mechanical responses of lithium-ion batteries (LIBs) during the discharge process. In this model, active particles (lithium iron phosphate) are explicitly resolved to allow the direct assignment of boundary conditions on particle surfaces. To incorporate the effect of binder phase in a numerically efficient manner, it is modeled as a homogenized matrix with a pore-filling electrolyte that allows the transport of both electrons and ions. A new virtual packing algorithm is implemented to reconstruct three cathode microstructures, one of which has an idealized microstructure with spherical particles of similar radii. This microstructural model is used for the verification of the 3DFE model through comparison with the pseudo two-dimensional (P2D) model. The other two cathodes, which are composed of two-size spherical and arbitrary-shaped particles, are used to study the impact of microstructure and discharge rate on the electro-chemo-mechanical behavior. The proposed model predicts the effect of electrode microstructure on active material utilization, as well as the magnitude and distribution of mechanical stresses developed in particles. We also study how the mechanical response of the cathode is affected by the binder stiffness.

[1]  H. Huang,et al.  Critical lithiation for C-rate dependent mechanical stresses in LiFePO4 , 2015, Journal of Solid State Electrochemistry.

[2]  M. Doyle,et al.  Modeling of Galvanostatic Charge and Discharge of the Lithium/Polymer/Insertion Cell , 1993 .

[3]  Ann Marie Sastry,et al.  Micro-Scale Modeling of Li-Ion Batteries: Parameterization and Validation , 2012 .

[4]  H. Huang,et al.  Mechanical stresses at the cathode–electrolyte interface in lithium-ion batteries , 2016 .

[5]  Rahul Malik,et al.  A Critical Review of the Li Insertion Mechanisms in LiFePO4 Electrodes , 2013 .

[6]  K. Peters,et al.  Multiphysics Coupling in Lithium-Ion Batteries with Reconstructed Porous Microstructures , 2018 .

[7]  Rajlakshmi Purkayastha,et al.  An integrated 2-D model of a lithium ion battery: the effect of material parameters and morphology on storage particle stress , 2012 .

[8]  Robert J. Kee,et al.  Three-dimensional particle-resolved models of Li-ion batteries to assist the evaluation of empirical parameters in one-dimensional models , 2012 .

[9]  Jianqiu Li,et al.  A review on the key issues for lithium-ion battery management in electric vehicles , 2013 .

[10]  Wei Shyy,et al.  Intercalation-Induced Stress and Heat Generation within Single Lithium-Ion Battery Cathode Particles , 2008 .

[11]  Chien‐Fan Chen,et al.  Probing the Role of Electrode Microstructure in the Lithium-Ion Battery Thermal Behavior , 2017 .

[12]  Xiaodong Wu,et al.  Cracking causing cyclic instability of LiFePO4 cathode material , 2005 .

[13]  P. Shearing,et al.  Particle Size Polydispersity in Li-Ion Batteries , 2014 .

[14]  W. Shyy,et al.  Effective Transport Properties of LiMn2O4 Electrode via Particle-Scale Modeling , 2011 .

[15]  Paul R. Shearing,et al.  On the origin and application of the Bruggeman correlation for analysing transport phenomena in electrochemical systems , 2016 .

[16]  Ning Li,et al.  LiFePO4 Cathode Material , 2011 .

[17]  M. Doyle,et al.  Simulation and Optimization of the Dual Lithium Ion Insertion Cell , 1994 .

[18]  Christopher D. Rahn,et al.  Model-based electrochemical estimation of lithium-ion batteries , 2008, 2008 IEEE International Conference on Control Applications.

[19]  Zhiguo Qu,et al.  A microscopic investigation of ion and electron transport in lithium-ion battery porous electrodes using the lattice Boltzmann method , 2017 .

[20]  W. Shyy,et al.  Numerical Simulation of Intercalation-Induced Stress in Li-Ion Battery Electrode Particles , 2007 .

[21]  Chaoyang Wang,et al.  Control oriented 1D electrochemical model of lithium ion battery , 2007 .

[22]  Ralph E. White,et al.  Review of Models for Predicting the Cycling Performance of Lithium Ion Batteries , 2006 .

[23]  Karim Zaghib,et al.  Understanding Rate-Limiting Mechanisms in LiFePO4 Cathodes for Li-Ion Batteries , 2011 .

[24]  Mark W. Verbrugge,et al.  Evolution of stress within a spherical insertion electrode particle under potentiostatic and galvanostatic operation , 2009 .

[25]  Ralph E. White,et al.  Capacity Fade Mechanisms and Side Reactions in Lithium‐Ion Batteries , 1998 .

[26]  Li Jia,et al.  A pseudo three-dimensional electrochemical–thermal model of a prismatic LiFePO4 battery during discharge process , 2015 .

[27]  Simona Onori,et al.  On Veracity of Macroscopic Lithium-Ion Battery Models , 2015 .

[28]  H. Huang,et al.  In Situ Imaging of Lithium-Ion Batteries Via the Secondary Ion Mass Spectrometry , 2014 .

[29]  Lars Ole Valøen,et al.  Transport Properties of LiPF6-Based Li-Ion Battery Electrolytes , 2005 .

[30]  Robert J. Kee,et al.  Effects of three-dimensional cathode microstructure on the performance of lithium-ion battery cathodes , 2013 .

[31]  Les A. Piegl,et al.  The NURBS Book , 1995, Monographs in Visual Communication.

[32]  Ralph E. White,et al.  Theoretical Analysis of Stresses in a Lithium Ion Cell , 2010 .

[33]  John Newman,et al.  Stress generation and fracture in lithium insertion materials , 2005 .

[34]  Alberto Salvadori,et al.  Computational modeling of Li-ion batteries , 2016 .

[35]  W. Craig Carter,et al.  Microstructural Modeling and Design of Rechargeable Lithium-Ion Batteries , 2005 .

[36]  Victor E. Brunini,et al.  Mechanical and electrochemical response of a LiCoO2 cathode using reconstructed microstructures , 2016 .

[37]  Yet-Ming Chiang,et al.  Spatially Resolved Modeling of Microstructurally Complex Battery Architectures , 2007 .

[38]  J. Bernard,et al.  Simplified Electrochemical and Thermal Model of LiFePO4-Graphite Li-Ion Batteries for Fast Charge Applications , 2012 .

[39]  H. Huang,et al.  Stress Evolution on the Phase Boundary in LiFePO4 Particles , 2013 .

[40]  K. Kim,et al.  Lithium Concentration Dependent Elastic Properties of Battery Electrode Materials from First Principles Calculations , 2014 .

[41]  H. Huang,et al.  Coupled Mechanical and Electrochemical Analyses of 3D Reconstructed LiFePO4 by FIB/SEM in Lithium-Ion Batteries , 2018 .

[42]  Soheil Soghrati,et al.  Conforming to interface structured adaptive mesh refinement: 3D algorithm and implementation , 2018, Computational Mechanics.

[43]  Ralph E. White,et al.  Extension of Physics-Based single Particle Model for Higher Charge-Discharge Rates , 2013 .

[44]  Soheil Soghrati,et al.  Conforming to interface structured adaptive mesh refinement , 2017 .

[45]  Victor E. Brunini,et al.  A Framework for Three-Dimensional Mesoscale Modeling of Anisotropic Swelling and Mechanical Deformation in Lithium-Ion Electrodes , 2014 .

[46]  Victor E. Brunini,et al.  Mesoscale Effective Property Simulations Incorporating Conductive Binder , 2017 .

[47]  Z. Jiang,et al.  Lattice Boltzmann simulation of ion and electron transport during the discharge process in a randomly reconstructed porous electrode of a lithium-ion battery , 2018, International Journal of Heat and Mass Transfer.

[48]  Ming Yang,et al.  New algorithms for virtual reconstruction of heterogeneous microstructures , 2018, Computer Methods in Applied Mechanics and Engineering.

[49]  K. Schladitz,et al.  Multiscale simulation process and application to additives in porous composite battery electrodes , 2015 .

[50]  Gan Ning,et al.  Cycle Life Modeling of Lithium-Ion Batteries , 2004 .

[51]  B. Yan,et al.  Three Dimensional Simulation of Galvanostatic Discharge of LiCoO2 Cathode Based on X-ray Nano-CT Images , 2012 .

[52]  Myounggu Park,et al.  Generation of Realistic Particle Structures and Simulations of Internal Stress: A Numerical/AFM Study of LiMn2O4 Particles , 2010 .

[53]  Ralph E. White,et al.  Single-Particle Model for a Lithium-Ion Cell: Thermal Behavior , 2011 .

[54]  Roland Zengerle,et al.  Three-dimensional electrochemical Li-ion battery modelling featuring a focused ion-beam/scanning electron microscopy based three-phase reconstruction of a LiCoO2 cathode , 2014 .

[55]  J. Tarascon,et al.  Comparison of Modeling Predictions with Experimental Data from Plastic Lithium Ion Cells , 1996 .

[56]  Ali Ghorbani Kashkooli,et al.  Multiscale modeling of lithium-ion battery electrodes based on nano-scale X-ray computed tomography , 2016 .

[57]  V. Shenoy,et al.  Role of Plastic Deformation of Binder on Stress Evolution during Charging and Discharging in Lithium-Ion Battery Negative Electrodes , 2013 .