iFEM benchmark problems for solid elements

Structural health monitoring (SHM) is a growing field of research, as it has the potential to simultaneously improve the reliability of structures and reduce their maintenance cost. SHM requires accurate stress and strain information, preferably for the entire structure. Unfortunately, it is often infeasible to instrument every part of the structure, making it necessary to estimate the stress and strain fields based on data from a limited number of sensors. One promising technique for making this estimate is the inverse finite element method (iFEM), which can be applied to any combination of geometry and loading conditions. In addition, it can also process several different types of sensor data. In this study, benchmark problems based on the MacNeal and Harder linear elastic problem set for FEM algorithms were extended to test the accuracy of iFEM algorithms. As the benchmarks use linear elastic materials, small displacements and strains, the iFEM implementation was also limited to these conditions. Accurate iFEM estimates can be obtained for the benchmark problems for which accurate FEM solutions can be obtained with solid elements, specifically 3-dimensional 20 node hexahedral elements with reduced integration (C3D20R), based on either displacement sensors, strain sensors, or both combined, and provided that a sufficient number of sensors is used. The iFEM algorithms generally produce more accurate estimates of displacements than of strains. The addition of Tikhonov regularization does not result in a significant increase in accuracy for either the displacement or strain distribution estimates and can even deteriorate the results in certain cases.

[1]  H. R. Riggs,et al.  An Inverse Finite Element Strategy to Recover Full-Field, Large Displacements From Strain Measurements , 2007 .

[2]  Simo Puntanen,et al.  Two matrix-based proofs that the linear estimator Gy is the best linear unbiased estimator , 2000 .

[3]  Marco Gherlone,et al.  Shape and stress sensing of multilayered composite and sandwich structures using an inverse Finite Element Method , 2013 .

[4]  Celeste Barnardo-Viljoen,et al.  An inverse finite element method for the analysis of VIV data , 2013 .

[5]  Erkan Oterkus,et al.  Displacement and stress monitoring of a Panamax containership using inverse finite element method , 2016 .

[6]  Marco Gherlone,et al.  Beam Shape Sensing Using Inverse Finite Element Method: Theory and Experimental Validation , 2011 .

[7]  Marco Gherlone,et al.  DYNAMIC SHAPE RECONSTRUCTION OF THREE-DIMENSIONAL FRAME STRUCTURES USING THE INVERSE FINITE ELEMENT METHOD , 2011 .

[8]  Erkan Oterkus,et al.  Displacement and stress monitoring of a chemical tanker based on inverse finite element method , 2016 .

[9]  C. C. Quach,et al.  Structural Health Monitoring Using High-Density Fiber Optic Strain Sensor and Inverse Finite Element Methods , 2005 .

[10]  J. Z. Zhu,et al.  The finite element method , 1977 .

[11]  K. Y. Sze,et al.  Popular benchmark problems for geometric nonlinear analysis of shells , 2004 .

[12]  Alexander Tessler,et al.  A quadrilateral inverse-shell element with drilling degrees of freedom for shape sensing and structural health monitoring , 2016 .

[13]  R. L. Harder,et al.  A proposed standard set of problems to test finite element accuracy , 1985 .

[14]  Alexander Tessler,et al.  Structural Analysis Methods for Structural Health Management of Future Aerospace Vehicles , 2007 .

[15]  Eric G. Cooper,et al.  Structural Anomaly Detection Using Fiber Optic Sensors and Inverse Finite Element Method , 2005 .

[16]  Marcias Martinez,et al.  Load monitoring for active control of wind turbines , 2015 .

[17]  Jan L. Spangler,et al.  Inverse FEM for Full-Field Reconstruction of Elastic Deformations in Shear Deformable Plates and Shells , 2004 .

[18]  Alexander Tessler,et al.  An Inverse Interpolation Method Utilizing In-Flight Strain Measurements for Determining Loads and Structural Response of Aerospace Vehicles , 2001 .

[19]  Alexander Tessler,et al.  A Variational Principle for Reconstruction of Elastic Deformations in Shear Deformable Plates and Shells , 2003 .

[20]  Marco Gherlone,et al.  Shape sensing of 3D frame structures using an inverse Finite Element Method , 2012 .

[21]  Alexander Tessler,et al.  A least-squares variational method for full-field reconstruction of elastic deformations in shear-deformable plates and shells , 2005 .

[22]  Carl Friedrich Gauss METHODUS NOVA INTEGRALIUM VALORES PER APPROXIMATIONEM INVENIENDI , 2011 .

[23]  M. Gherlone,et al.  An inverse finite element method for beam shape sensing: theoretical framework and experimental validation , 2014 .

[24]  Nicholas Zabaras,et al.  Investigation of regularization parameters and error estimating in inverse elasticity problems , 1994 .