Hybrid Analysis of Gas Annular Seals With Energy Equation

[1]  Jean Frene,et al.  Combined Navier–Stokes and Bulk-Flow Analysis of Hybrid Bearings: Radial and Angled Injection , 2005 .

[2]  D. Childs,et al.  The Impact of Real Gas Properties on Predictions of Static and Rotordynamic Properties of the Annular Gas Seals for Injection Compressors , 2008 .

[3]  Harald Underbakke,et al.  Hole-Pattern and Honeycomb Seal Rotordynamic Forces: Validation of CFD-Based Prediction Techniques , 2012 .

[4]  Dara W. Childs,et al.  Theory Versus Experiment for the Rotordynamic Impedances of Two Hole-Pattern-Stator Gas Annular Seals , 2002 .

[5]  J. Jeffrey Moore,et al.  Three-Dimensional CFD Rotordynamic Analysis of Gas Labyrinth Seals , 2003 .

[6]  Paul E. Allaire,et al.  Numerical Modeling of Fluid-Induced Rotordynamic Forces in Seals With Large Aspect Ratios , 2013 .

[7]  Zhenping Feng,et al.  Investigations on the Rotordynamic Characteristics of a Hole-Pattern Seal Using Transient CFD and Periodic Circular Orbit Model , 2011 .

[8]  Paul E. Allaire,et al.  CFD Analysis of a Canned Pump Rotor Considering an Annular Fluid With Axial Flow , 2009 .

[9]  Jonathan Leigh Wade.  Test versus predictions for rotordynamic coefficients and leakage rates of hole-pattern gas seals at two clearances in choked and unchoked conditions , 2004 .

[10]  Thomas Soulas,et al.  Numerical Modeling of Rotordynamic Coefficients for Deliberately Roughened Stator Gas Annular Seals , 2006 .

[11]  G. G. Hirs.  A Bulk-Flow Theory for Turbulence in Lubricant Films , 1973 .

[12]  Paul E. Allaire,et al.  A Computational Fluid Dynamics/Bulk-Flow Hybrid Method for Determining Rotordynamic Coefficients of Annular Gas Seals , 2012 .

[13]  Hugh W. Coleman,et al.  A New Friction Factor Model and Entrance Loss Coefficient for Honeycomb Annular Gas Seals , 2000 .

[14]  C. C. Nelson.  Analysis for leakage and rotordynamic coefficients of surface-roughened tapered annular gas seals , 1984 .

[15]  Dara W. Childs,et al.  Annular Honeycomb-Stator Turbulent Gas Seal Analysis Using a New Friction-Factor Model Based on Flat Plate Tests , 1994 .

[16]  Dara W. Childs,et al.  Turbomachinery Rotordynamics: Phenomena, Modeling, and Analysis , 1993 .

[17]  C. C. Nelson.  Rotordynamic coefficients for compressible flow in tapered annular seals , 1985 .

[18]  Dara W. Childs,et al.  Rotordynamic-Coefficient and Leakage Characteristics for Hole-Pattern-Stator Annular Gas Seals—Measurements Versus Predictions , 2004 .

[19]  Stephen Phillips,et al.  Friction Factor Behavior From Flat-Plate Tests of Smooth and Hole-Pattern Roughened Surfaces With Supply Pressures up to 84 bars , 2011 .

[20]  Dara W. Childs,et al.  The Acoustic Influence of Cell Depth on the Rotordynamic Characteristics of Smooth-Rotor/Honeycomb-Stator Annular Gas Seals , 1996 .

[21]  Zhenping Feng,et al.  Rotordynamic performance prediction for surface-roughened seal using transient computational fluid dynamics and elliptical orbit model , 2012 .