Circuit equation formulation of resistive wall mode feedback stabilization schemes

Recently, various schemes for controlling the resistive wall mode have been proposed. Here, the problem of resistive wall mode feedback control is formulated utilizing concepts from electrical circuit theory. Each of the coupled elements (the perturbed plasma current, the poloidal passive shell system and the active coil system) is considered as lumped parameter electrical circuits obeying the usual laws of linear circuit theory. A dispersion relation is derived using different schemes for the feedback logic. The various schemes differ in the choice of sensor signal, which is determined by some combination of the three independent circuit currents. Feedback schemes are discussed which can, ideally, completely stabilize the kink mode. These schemes depend, for their success, on a suitable choice for the location of the sensors. A feedback scheme based on sensing the passive shell eddy current is discussed which seeks to drive the feedback system response to a point of marginal stability. For realizable feedback gain factors, this feedback system can suppress the kink mode amplitude for times that are very long compared with the L/R time-scale of the passive shell system. The circuit equation approach discussed provides a useful means for comparing various control strategies for n ≥ 1 kink mode control, and allows useful analogies to be drawn between kink mode control and the control of n = 0 vertical position instabilities.

[1]  C. Gimblett.  LETTER TO THE EDITOR: Stabilization of thin shell modes by a rotating secondary wall , 1989 .

[2]  J. Manickam,et al.  Role of the stabilizing shell in high- beta , low-q disruptions in PBX-M , 1996 .

[3]  Two-dimensional calculation of eddy currents on external conducting walls induced by low-n external modes , 1998 .

[4]  Bondeson,et al.  Stabilization of external modes in tokamaks by resistive walls and plasma rotation. , 1994, Physical review letters.

[5]  S. Horne,et al.  Plasma Shape Control: A General Approach and Its Application to Alcator C-Mod , 1996 .

[6]  R. Fitzpatrick,et al.  Resistive wall feedback stabilization , 1997 .

[7]  L. L. Lao,et al.  Experimental study of the vertical stability of high decay index plasmas in the DIII-D tokamak , 1990 .

[8]  S. Jardin,et al.  Mechanism of vertical displacement events in JT-60U disruptive discharges , 1996 .

[9]  Allen H. Boozer,et al.  Equations for studies of feedback stabilization , 1998 .

[10]  L. L. Lao,et al.  Wall stabilization of high beta plasmas in DIII-D , 1995 .

[11]  C. Bishop.  An intelligent shell for the toroidal pinch , 1989 .

[12]  R. Yoshino,et al.  Sensor Algorithms of the Plasma Vertical Position to Avoid a Vertical Displacement Event During Plasma-Current Quench on JT-60U , 1996 .

[13]  R. Fitzpatrick,et al.  Stabilization of the resistive wall mode using a fake rotating shell , 1996 .

[14]  R. Fitzpatrick,et al.  STABILIZATION OF THE RESISTIVE SHELL MODE IN TOKAMAKS , 1996 .

[15]  J. B. Lister,et al.  Control of the vertical instability in tokamaks , 1990 .

[16]  E. J. Strait,et al.  Stability of high beta tokamak plasmas , 1994 .

[17]  O. Gruber,et al.  Vertical displacement events and halo currents , 1993 .

[18]  A. Boozer.  Stabilization of resistive wall modes by slow plasma rotation , 1995 .

[19]  J. Wesson.  Hydromagnetic stability of tokamaks , 1978 .

[20]  K. Hain,et al.  Zur Stabilität zylindersymmetrischer Plasmakonfigurationen mit Volumenströmen , 1958 .

[21]  Benjamin C. Kuo,et al.  AUTOMATIC CONTROL SYSTEMS , 1962, Universum:Technical sciences.

[22]  C. Platt,et al.  Experimental investigations of feedback circuits for suppressing resistive wall modes , 1991 .

[23]  Tadashi Sekiguchi,et al.  Plasma Physics and Controlled Nuclear Fusion Research , 1987 .