Evaluation of fibre-reinforced concrete fracture energy through tests on notched round determinate panels with different diameters

Abstract The Round Determinate Panel (RDP) test has proven to be a reliable method for designing the fibre dosage of shotcrete used in rockbolting operations of underground mining sites. It remains, however, a method that measures the structural performance of the panel but that does not give any intrinsic property of the material itself. Furthermore, this experimental procedure requires the use of large, heavy panels that could generate safety risks. The feasibility of smaller panel sizes is investigated in this study, as well as the potential for deriving a procedure that would estimate the specific fracture energy of the material. It is based on simple kinematic assumptions and its reliability has been verified by using more complex numerical tools. This research could lead to the revision of the methods currently used to design sprayed fibre-reinforced concrete for tunnel linings.

[1]  Peter Jones,et al.  Prediction of steel fibre reinforced concrete under flexure from an inferred fibre pull-out response , 2005 .

[2]  Joaquim A. O. Barros,et al.  Post-cracking behaviour of steel fibre reinforced concrete , 2003 .

[3]  N. Banthia,et al.  STEEL-FIBER-REINFORCED WET-MIX SHOTCRETE: COMPARISONS WITH CAST CONCRETE. TECHNICAL NOTE , 1994 .

[4]  V. Li,et al.  Micromechanics of crack bridging in fibre-reinforced concrete , 1993 .

[5]  Simon A. Austin,et al.  Predicting the flexural load–deflection response of steel fibre reinforced concrete from strain, crack-width, fibre pull-out and distribution data , 2008 .

[6]  Alberto Meda,et al.  Fracture behavior of SFRC slabs on grade , 2004 .

[7]  P. Rossi.  A model for cracking in fibre-reinforced concrete structures , 1999 .

[8]  John Forbes Olesen,et al.  Fictitious Crack Propagation in Fiber-Reinforced Concrete Beams , 2001 .

[9]  D. R. McCreath,et al.  Shortcrete support design in blocky ground: Towards a deterministic approach , 1995 .

[10]  Claudio Mazzotti,et al.  Post-cracking behaviour of steel and macro-synthetic fibre-reinforced concretes , 2011 .

[11]  D. C. Drucker,et al.  Plastic and Elastic Design of Slabs and Plates , 1963 .

[13]  Surendra P. Shah,et al.  Fracture behavior and analysis of fiber reinforced concrete beams , 1980 .

[14]  M. Mitchell,et al.  A New Round Panel Test for the Characterization of Fiber Reinforced Concrete: A Broad Experimental Study , 2011 .

[15]  E. S. Bernard.  Correlations in the behaviour of fibre reinforced shotcrete beam and panel specimens , 2002 .

[16]  Aurelio Muttoni,et al.  Fédération Internationale du Béton (fib), Model Code 2010 - First complete draft, chapters 7.3 and 7.13 , 2010 .

[17]  B. I. G. Barr,et al.  A four-exponential model to describe the behaviour of fibre reinforced concrete , 2004 .

[18]  J. Barros,et al.  Fracture Energy of Steel Fiber-Reinforced Concrete , 2001 .

[19]  Christopher K.Y. Leung,et al.  Properties of wet-mixed fiber reinforced shotcrete and fiber reinforced concrete with similar composition , 2005 .

[20]  Lucie Vandewalle,et al.  RILEM TC 162-TDF: Test and design methods for steel fibre reinforced concrete' - sigma-epsilon-design method - Final Recommendation , 2003 .

[21]  Sidney Mindess,et al.  CRACKING PROCESSES IN STEEL FIBER REINFORCED CEMENT PASTE , 1985 .

[22]  P Rossi,et al.  Fibre - Reinforced Concretes (FRC) - BEFIB' 2000- Proceedings of the Fifth International RILEM Symposium - 13-15 September 2000 - Lyon - France , 2000 .

[23]  Arne Hillerborg,et al.  Analysis of fracture by means of the fictitious crack model, particularly for fibre reinforced concrete , 1980 .

[24]  V. S. Gopalaratnam,et al.  On the characterization of flexural toughness in fiber reinforced concretes , 1995 .

[25]  Charles Audet,et al.  Analysis of Generalized Pattern Searches , 2000, SIAM J. Optim..

[26]  P. Anbazhagan,et al.  Characterization of clean and fouled rail track ballast subsurface using seismic surface survey method: Model and field studies , 2011 .

[27]  Steen Krenk,et al.  Analytical Model for Fictitious Crack Propagation in Concrete Beams , 1995 .

[28]  M. Savoia,et al.  Concrete crack reduction in tunnel linings by steel fibre-reinforced concretes , 2013 .

[29]  Lucie Vandewalle,et al.  Recommendations of RILEM TC 162-TDF: test and design methods for steel fibre reinforced concrete. Design of steel fibre reinforced concrete using the sigma-w method: principles and applications , 2000 .

[30]  P. Rossi,et al.  Analysis of metallic fibre-reinforced concrete beams submitted to bending , 1996 .

[31]  Lucie Vandewalle,et al.  RILEM TC162-TDF : Test and Design Methdos for Steel Fibre Reinforced Concrete : Design of steel fibre reinforced concrete using the sigma-w-method : principles and applications , 2002 .

[32]  Ece Erdogmus,et al.  Strengthening Two-Way Reinforced Concrete Floor Slabs Using Polypropylene Fiber Reinforcement , 2011 .

[33]  Lucie Vandewalle,et al.  Design of steel fibre reinforced concrete using the σ-w method: principles and applications , 2002 .

[34]  Nick Barton,et al.  Engineering classification of rock masses for the design of tunnel support , 1974 .