Mechanism of grain refining in AZ91 Mg welds by arc oscillation

Grain refining can improve the solidification-cracking resistance and mechanical properties of welds. Mg alloys are increasingly used for vehicle weight reduction, AZ91 Mg being the most widely used Mg casting alloy. The present study was conducted to study grain refining in gas–tungsten arc welding of AZ91 Mg, focusing on identifying the mechanism of grain refining. Significant grain refining was obtained by transverse arc oscillation. Dendrite fragmentation was identified as the grain refining mechanism, instead of heterogeneous nucleation or grain detachment. This was done by using an overlap welding procedure in which the weld made with transverse arc oscillation (test weld) overlapped with another weld made previously without arc oscillation (preweld). It was found that repeated prewelding followed by welding with transverse arc oscillation resulted in very fine grains.

[1]  Lei Wang,et al.  Formability of AZ31 Mg alloy sheets within medium temperatures , 2013 .

[2]  Y. K. Yang,et al.  Spatter and Porosity in Gas-Metal Arc Welding of Magnesium Alloys : Mechanisms and Elimination , 2013 .

[3]  H. W. Kerr,et al.  Grain refinement in magnetically stirred GTA welds of aluminum alloys , 1981 .

[4]  Gerald S. Cole,et al.  Summary of “Magnesium Vision 2020: A North American Automotive Strategic Vision for Magnesium” , 2016 .

[5]  R. Murugesan,et al.  Fusion zone grain refinement in aluminum alloy welds through magnetic arc oscillation and its effect on tensile behavior , 1999 .

[6]  R. Raman,et al.  Effect of Mechanical Arc Oscillation on the Grain Structure of Mild Steel Weld Metal , 2012, Transactions of the Indian Institute of Metals.

[7]  D. Farson,et al.  Effect of magnetic stirring on grain structure refinement: Part 1 – Autogenous nickel alloy welds , 2010 .

[8]  G. Reddy,et al.  Grain refinement through arc manipulation techniques in Al–Cu alloy GTA welds , 2005 .

[9]  S. Kou,et al.  Predicting susceptibility of magnesium alloys to weld-edge cracking , 2015 .

[10]  M. K. Kulekci.  Magnesium and its alloys applications in automotive industry , 2008 .

[11]  G. Reddy,et al.  Weld microstructure refinement in a 1441 grade aluminium-lithium alloy , 1997 .

[12]  D. Farson,et al.  Effect of magnetic stirring on grain structure refinement Part 2 – Nickel alloy weld overlays , 2010 .

[13]  Zhen Luo,et al.  Grain refining by ultrasonic stirring of the weld pool , 2016 .

[14]  C. Cross,et al.  Grain Refinement of AZ31 Magnesium Alloy Weldments by AC Pulsing Technique , 2012, Metallurgical and Materials Transactions A.

[15]  S. Lu,et al.  Dendrite fragmentation and the effects of fluid flow in castings , 1997 .

[16]  G. den Ouden,et al.  Grain refinement due to grain detachment in electromagnetically stirred AA7020 welds , 2003 .

[17]  S. Kou,et al.  Grain structure and solidification cracking in oscillated arc welds of 5052 aluminum alloy , 1985 .

[18]  S. Kou,et al.  Alternating grain orientation and weld solidification cracking , 1985 .

[19]  D. StJohn,et al.  A New Analytical Approach to Reveal the Mechanisms of Grain Refinement , 2007 .

[20]  A. Luo.  Processing, microstructure, and mechanical behavior of cast magnesium metal matrix composites , 1995 .

[21]  Nucleation Mechanisms and Grain Refining of Weld Metal , 2013 .

[22]  A. Pittner,et al.  Solidification of GTA Aluminum Weld Metal : Part I – Grain Morphology Dependent upon Alloy Composition and Grain Refiner Content , 2014 .

[23]  Jie Song,et al.  The Interface of TiB2 and Al3Ti in Molten Aluminum , 2015, Metallurgical and Materials Transactions B.

[24]  Structural Steels,et al.  Welding Metallurgy of , 1987 .

[25]  M. Flemings.  Solidification processing , 1974, Metallurgical and Materials Transactions B.

[26]  R. Raman,et al.  Grain Refinement in Al-Mg-Si Alloy TIG Welds Using Transverse Mechanical Arc Oscillation , 2012, Journal of Materials Engineering and Performance.