Precipitation behavior of a β-quenched Ti-5Al-5Mo-5V-1Cr-1Fe alloy during high-temperature compression

[1]  Y. Lin,et al.  Deformation-induced variations in microstructure evolution and mechanical properties of bi-modal Ti-55511 titanium alloy , 2019, Journal of Alloys and Compounds.

[2]  Y. Lin,et al.  Influences of pre-precipitated δ phase on microstructures and hot compressive deformation features of a nickel-based superalloy , 2019, Vacuum.

[3]  B. Almangour,et al.  Novel TiB2-reinforced 316L stainless steel nanocomposites with excellent room- and high-temperature yield strength developed by additive manufacturing , 2019, Composites Part B: Engineering.

[4]  Y. Lin,et al.  Effects of solution temperature and cooling rate on microstructure and micro-hardness of a hot compressed Ti-6Al-4V alloy , 2019, Vacuum.

[5]  Ming-Song Chen,et al.  New insights on the relationship between flow stress softening and dynamic recrystallization behavior of magnesium alloy AZ31B , 2019, Materials Characterization.

[6]  Y. Lin,et al.  Phase transformation and constitutive models of a hot compressed TC18 titanium alloy in the α+β regime , 2018, Vacuum.

[7]  Y. C. Lin,et al.  Isothermal tensile deformation behaviors and fracture mechanism of Ti-5Al-5Mo-5V-1Cr-1Fe alloy in β phase field , 2018, Vacuum.

[8]  Shun-Peng Zhu,et al.  Strain energy gradient-based LCF life prediction of turbine discs using critical distance concept , 2018, International Journal of Fatigue.

[9]  Weiwen Peng,et al.  Computational-experimental approaches for fatigue reliability assessment of turbine bladed disks , 2018, International Journal of Mechanical Sciences.

[10]  R. Dong,et al.  Precipitation behavior of α phase during aging treatment in a β-quenched Ti-7333 , 2018, Materials Characterization.

[11]  Y. Lin,et al.  Microstructural evolution of a Ni-Fe-Cr-base superalloy during non-isothermal two-stage hot deformation , 2018 .

[12]  Rui Yang,et al.  Correction of Flow Curves and Constitutive Modelling of a Ti-6Al-4V Alloy , 2018 .

[13]  Chun Dong,et al.  MPM simulations of high-speed machining of Ti6Al4V titanium alloy considering dynamic recrystallization phenomenon and thermal conductivity , 2018 .

[14]  J. Yeom,et al.  Tensile properties of a newly developed high-temperature titanium alloy at room temperature and 650 °C , 2018 .

[15]  M. Zhan,et al.  Pre-processing related recrystallization behavior in β annealing of a near-β Ti-5Al-5Mo-5V-3Cr-1Zr titanium alloy , 2018 .

[16]  B. Tang,et al.  Hot Deformation Behavior, Dynamic Recrystallization, and Texture Evolution of Ti–22Al–25Nb Alloy , 2018 .

[17]  Y. C. Lin,et al.  Effects of initial microstructures on hot tensile deformation behaviors and fracture characteristics of Ti-6Al-4V alloy , 2018 .

[18]  R. Dong,et al.  Precipitation of α phase and its morphological evolution during continuous heating in a near β titanium alloy Ti-7333 , 2017 .

[19]  H. Jafarian,et al.  Recrystallization, precipitation and flow behavior of D3 tool steel under hot working condition , 2017 .

[20]  Ming-Song Chen,et al.  Modeling and simulation of dynamic recrystallization behaviors of magnesium alloy AZ31B using cellular automaton method , 2017 .

[21]  G. Ebrahimi,et al.  Flow curves, dynamic recrystallization and precipitation in a medium carbon low alloy steel , 2017 .

[22]  Xiao-hua He,et al.  Fields–Backofen and a Modified Johnson-Cook Model for CP-Ti at Ambient and Intermediate Temperature , 2017 .

[23]  Y. Lin,et al.  A new dynamic recrystallization kinetics model for a Nb containing Ni-Fe-Cr-base superalloy considering influences of initial δ phase , 2017 .

[24]  A. Jäger,et al.  Flow softening and dynamic recrystallization behavior of BT9 titanium alloy: A study using process map development , 2017 .

[25]  Jie Zhou,et al.  Identification for the Optimal Working Parameters of Ti-6Al-4V-0.1Ru Alloy in a Wide Deformation Condition Range by Processing Maps Based on DMM , 2016 .

[26]  Miaoquan Li,et al.  Evolution mechanisms of the primary α and β phases during α/β deformation of an α/β titanium alloy TC8 , 2016 .

[27]  Dong-Dong Chen,et al.  A novel constitutive model for hot deformation behaviors of Ti–6Al–4V alloy based on probabilistic method , 2016 .

[28]  H. Jafarian,et al.  Dynamic softening mechanism in Ti-13V-11Cr-3Al beta Ti alloy during hot compressive deformation , 2016 .

[29]  Y. Lin,et al.  EBSD analysis of evolution of dynamic recrystallization grains and δ phase in a nickel-based superalloy during hot compressive deformation , 2016 .

[30]  Dongsheng Li,et al.  Material characterization, constitutive modeling and validation in hot stretch bending of Ti–6Al–4V profile , 2016 .

[31]  Amit Gupta,et al.  Influence of material models on theoretical forming limit diagram prediction for Ti–6Al–4V alloy under warm condition , 2016 .

[32]  Yufeng Zheng,et al.  Role of ω phase in the formation of extremely refined intragranular α precipitates in metastable β-titanium alloys , 2016 .

[33]  S. Semiatin,et al.  Influence of deformation on the Burgers orientation relationship between the α and β phases in Ti–5Al–5Mo–5V–1Cr–1Fe , 2015 .

[34]  Y. Lin,et al.  EBSD study of a hot deformed nickel-based superalloy , 2015 .

[35]  G. Requena,et al.  Influence of phase transformation kinetics on the formation of α in a β-quenched Ti–5Al–5Mo–5V–3Cr–1Zr alloy , 2015 .

[36]  Y. Ning,et al.  Competition between dynamic recovery and recrystallization during hot deformation for TC18 titanium alloy , 2015 .

[37]  W. Zeng,et al.  Development of the Dynamic Globularization Prediction Model for Ti-17 Titanium Alloy Using Finite Element Method , 2015, Journal of Materials Engineering and Performance.

[38]  Y. Lin,et al.  Dynamic recrystallization behavior of a typical nickel-based superalloy during hot deformation , 2014 .

[39]  Yuyong Chen,et al.  Effect of heat treatment on microstructure and mechanical properties of a new β high strength titanium alloy , 2014 .

[40]  Amit Gupta,et al.  Microstructure study and constitutive modeling of Ti–6Al–4V alloy at elevated temperatures , 2014 .

[41]  James C. Williams,et al.  Perspectives on Titanium Science and Technology , 2013 .

[42]  C. H. Ward,et al.  A comparative study of the mechanical properties of high-strength -titanium alloys , 2008 .

[43]  H. Abe,et al.  Dynamic recovery and recrystallization in titanium alloys by hot deformation , 2007 .

[44]  T. Bieler,et al.  Effects of working, heat treatment, and aging on microstructural evolution and crystallographic texture of α, α′, α″ and β phases in Ti–6Al–4V wire , 2005 .

[45]  H. Fraser,et al.  The role of crystallographic and geometrical relationships between α and β phases in an α/β titanium alloy , 2003 .

[46]  Y. Prasad,et al.  Deformation behaviour of beta titanium alloy Ti–10V–4.5Fe–1.5Al in hot upset forging , 2002 .