Adsorption of CO2 on nitrogen-enriched activated carbon and zeolite 13X

Adsorption may be a potentially attractive alternative to capturing CO2 from stationary sources in the context of Carbon Capture and Sequestration (CCS) technologies. Activated carbon and zeolites are state-of-art adsorbents which may be used for CO2 adsorption, however physisorption alone tends to be insignificant at high temperatures. In the present work, commercial adsorbents have been impregnated with monoethanolamine (MEA) and triethanolamine (TEA) in order to investigate the effect of the modified surface chemistry on CO2 adsorption, especially above room temperature. Adsorption isotherms for CO2, N2 and CH4 were measured in a gravimetrically system in the pressure range of UHV to 10 bar, at 298 and 348 K for activated carbon and zeolite 13X supports. The adsorbed concentration of CO2 was significantly higher than those of CH4 and N2 for both adsorbents in the whole pressure range studied, zeolite 13X showing a remarkable affinity for CO2 at very low pressures. However, at 348 K, the adsorbed concentration of CO2 decreases significantly. The supports impregnated with concentrated amine solutions and dried in air suffered a detrimental effect on the textural properties, although CO2 uptake became much less susceptible to temperature increase. Impregnations carried out with dilute solution followed by drying in inert atmosphere yielded materials with very similar textural characteristics as compared to the parent support. CO2 isotherms in such materials showed a significant change with similar capacities at 348 K as compared to the original support at 298 K in the case of activated carbons. The impregnated zeolite showed a decrease in adsorbed phase concentration in low pressures for a given temperature, but the adsorbed amount also seemed to be less affected by temperature. These results are promising and indicate that CO2 adsorption may be enhanced despite high process temperatures (e.g. 348 K), if convenient impregnation and drying methods are applied.

[1]  Jun Zhang,et al.  Capture of CO2 from flue gas streams with zeolite 13X by vacuum-pressure swing adsorption , 2008 .

[2]  Preparation and characterization of polyethylenimine-modified mesoporous silicas as CO2 sorbents , 2007 .

[3]  Covadonga Pevida,et al.  CO2 capture by adsorption with nitrogen enriched carbons , 2007 .

[4]  Bert Metz,et al.  Carbon Dioxide Capture and Storage , 2005 .

[5]  Alan L. Chaffee,et al.  Diethylenetriamine[propyl(silyl)]-Functionalized (DT) Mesoporous Silicas as CO2 Adsorbents , 2006 .

[6]  S. Rayalu,et al.  In situ nitrogen enriched carbon for carbon dioxide capture , 2010 .

[7]  Timothy E. Fout,et al.  Advances in CO2 capture technology—The U.S. Department of Energy's Carbon Sequestration Program ☆ , 2008 .

[8]  Covadonga Pevida,et al.  Preparation of carbon dioxide adsorbents from the chemical activation of urea–formaldehyde and melamine–formaldehyde resins , 2007 .

[9]  Vivek Kumar,et al.  Amine loaded zeolites for carbon dioxide capture: Amine loading and adsorption studies , 2009 .

[10]  Antoni W. Morawski,et al.  High temperature ammonia treatment of activated carbon for enhancement of CO2 adsorption , 2004 .

[11]  Won-Jin Son,et al.  Adsorptive removal of carbon dioxide using polyethyleneimine-loaded mesoporous silica materials , 2008 .

[12]  Sukumar Devotta,et al.  Monoethanol Amine Modified Zeolite 13X for CO2 Adsorption at Different Temperatures , 2007 .

[13]  S. Satyapal,et al.  Performance and Properties of a Solid Amine Sorbent for Carbon Dioxide Removal in Space Life Support Applications , 2001 .

[14]  Christopher W. Jones,et al.  Adsorbent materials for carbon dioxide capture from large anthropogenic point sources. , 2009, ChemSusChem.

[15]  Armin D. Ebner,et al.  State-of-the-art Adsorption and Membrane Separation Processes for Carbon Dioxide Production from Carbon Dioxide Emitting Industries , 2009 .

[16]  B. Smit,et al.  Carbon dioxide capture: prospects for new materials. , 2010, Angewandte Chemie.

[17]  P. Harting,et al.  Highest Pressure Adsorption Equilibria Data: Measurement with Magnetic Suspension Balance and Analysis with a New Adsorbent/Adsorbate-Volume , 2002 .

[18]  D. Azevedo,et al.  Methane Adsorption Storage Using Microporous Carbons Obtained from Coconut Shells , 2005 .

[19]  Yuan Chun,et al.  CO2 Capture by As‐Prepared SBA‐15 with an Occluded Organic Template , 2006 .

[20]  Zhong Tang,et al.  Sorbents for CO2 capture from high carbon fly ashes. , 2008, Waste management.

[21]  R. Siriwardane,et al.  Adsorption of CO2 on Zeolites at Moderate Temperatures , 2005 .

[22]  Zhong Tang,et al.  CO2 capture by activated and impregnated anthracites , 2005 .

[23]  Lorenz T. Biegler,et al.  Optimization of Pressure Swing Adsorption and Fractionated Vacuum Pressure Swing Adsorption Processes for CO2 Capture , 2005 .

[24]  Yee Soong,et al.  Thermal and Chemical Stability of Regenerable Solid Amine Sorbent for CO2 Capture , 2006 .

[25]  C. Pevida,et al.  Evaluation of Activated Carbon Adsorbents for CO2 Capture in Gasification , 2009 .

[26]  Alírio E. Rodrigues,et al.  Adsorption Equilibrium of Methane, Carbon Dioxide, and Nitrogen on Zeolite 13X at High Pressures , 2004 .

[27]  Diana N. Tran,et al.  Ethylenediamine-modified SBA-15 as Regenerable CO2 Sorbent , 2005 .

[28]  Timothy Christopher Golden,et al.  ACTIVATED CARBON FOR GAS SEPARATION AND STORAGE , 1996 .

[29]  Bruce G. Miller,et al.  Novel Polyethylenimine-Modified Mesoporous Molecular Sieve of MCM-41 Type as High-Capacity Adsorbent for CO2 Capture , 2002 .

[30]  Colin E. Snape,et al.  CO2 capture using some fly ash-derived carbon materials , 2005 .