A simplified life estimation method for the spherical hull of deep manned submersibles

Abstract Creep and fatigue are involved in the loading of deep manned submersible, which is a rather complex variable amplitude pattern. Dwell effects resulting in lower life than pure fatigue are observed in the prior experimental research while no proper prediction methods are available to explain the phenomenon. Recently, the authors proposed a modified crack growth rate model to explain the creep effect under the cyclic loading which is validated for the crack growth of some titanium alloys under cyclic creep loading, however, its application is restricted to the condition where lots of parameters have to be determined based on many experiments and it is not very convenient in the material selection and primary design stage of a component. In this paper, a simplified prediction model for the load pattern of constant amplitude cyclic loading is proposed aiming at one of the most applicable materials for the pressure hull of submersibles, Ti–6Al–4V ELI. The method can be easily used to estimate the life of the pressure hull based on two series of basic mechanical properties of the material and validated by the modified crack growth rate model with parameters determined by large amounts of experimental data.

[1]  W. Fan.  Effect of Plastic Zone Size Induced by a Single Dwell Overload on the Fatigue Crack Growth Rate under Cyclic Loading , 2014 .

[2]  W. Cui,et al.  Prediction of Cold Dwell-Fatigue Crack Growth of Titanium Alloys , 2015, Acta Metallurgica Sinica (English Letters).

[3]  Liu Tao.  Research on the design of spherical pressure hull in manned deep-sea submersible , 2007 .

[4]  W. Evans.  Time dependent effects in fatigue of titanium and nickel alloys , 2004 .

[5]  K Yokota,et al.  RESEARCH ON PRESSURE HULL FOR DEEP SUBMERGENCE RESEARCH VEHICLES MADE OF TITANIUM ALLOY , 1986 .

[6]  Cui Wei-cheng.  Determination of fatigue load spectrum for pressure hull of a deep manned submersible , 2004 .

[7]  M. Bache.  A review of dwell sensitive fatigue in titanium alloys: the role of microstructure, texture and operating conditions , 2003 .

[8]  Jean Lemaitre,et al.  Coupled elasto-plasticity and damage constitutive equations , 1985 .

[9]  K Yokota,et al.  COLLAPSE STRENGTH OF SPHERICAL PRESSURE HULL FOR DEEP SUBMERGENCE RESEARCH VEHICLE MADE OF TITANIUM ALLOY , 1985 .

[10]  Bernard Drubay,et al.  A comparison between Japanese and French A16 defect assessment procedures for creep-fatigue crack growth , 2002 .

[11]  K. N. Smith.  A Stress-Strain Function for the Fatigue of Metals , 1970 .

[12]  Wang Zili.  Fatigue Life Analysis of Deep Manned Submersible by Using Finite Element Method , 2006 .

[13]  H. Davies,et al.  Dwell sensitive fatigue in a near alpha titanium alloy at ambient temperature , 1997 .

[14]  J. Chaboche.  Continuum Damage Mechanics: Part II—Damage Growth, Crack Initiation, and Crack Growth , 1988 .