The Effect of Transition-Metal Doping on Chromium Deposition at Pt/YSZ Cathode Interfaces

Understanding compositional effects, especially at solid oxide fuel cell operating conditions, is important for the selection of materials that minimize the impact of chromium deposition. In this study, the effect of yttria-stabilized zirconia (YSZ) doping on Cr deposition at a Pt electrode/YSZ electrolyte interface was investigated. A comparison between undoped and doped YSZ electrolyte surfaces after cathodic polarization in moist air at 800 degrees C in the presence of chromia indicated that the presence of Mn, Co, or Fe in the electrolyte significantly promotes Cr deposition at the electrode/electrolyte interface. Electron microscopy of the Co-doped YSZ electrolyte surface after cathodic polarization for 10-45 h clearly showed that with Co doping, the deposition of Cr occurs preferentially at YSZ grain boundaries. Impedance spectroscopy results showed that chromium deposition led to a decrease in resistance with Mn- and Fe-doped YSZ electrolyte, which was attributed to the increase in the three-phase boundary length. However, this beneficial effect of Cr deposition was not observed with Co doping, which may be related to the preferential deposition of chromia at the YSZ grain boundary, resulting in fewer Cr deposits at the cathode/electrolyte interface. (C) 2010 The Electrochemical Society. [DOI: 10.1149/1.3428384] All rights reserved.

[1]  E. Muccillo,et al.  Electrical conductivity of yttria-stabilized zirconia with cobalt addition , 2009 .

[2]  S. Jiang,et al.  Chromium Deposition and Poisoning on ( La0.6Sr0.4 − x Ba x ) ( Co0.2Fe0.8 ) O3 ( 0 ⩽ x ⩽ 0.4 ) Cathodes of Solid Oxide Fuel Cells , 2008 .

[3]  T. He,et al.  The effect of Fe doping on the properties of SOFC electrolyte YSZ , 2008 .

[4]  S. Jiang,et al.  Mechanism of Cr deposition and its application in the development of Cr-tolerant cathodes of solid oxide fuel cells , 2008 .

[5]  Kangli Wang,et al.  The Effect of Manganese Doping on Chromium Deposition at Pt/YSZ Cathode Interfaces , 2008 .

[6]  L. Singheiser,et al.  Chromium Poisoning of the Porous Composite Cathode Effect of Cathode Thickness and Current Density , 2007 .

[7]  J. Fergus.  Effect of cathode and electrolyte transport properties on chromium poisoning in solid oxide fuel cells , 2007 .

[8]  L. Singheiser,et al.  Reduction of chromium vaporization from SOFC interconnectors by highly effective coatings , 2007 .

[9]  S. Jiang,et al.  An Electrochemical Method to Assess the Chromium Volatility of Chromia-Forming Metallic Interconnect for SOFCs , 2006 .

[10]  Hajime Arai,et al.  Cr Poisoning Suppression in Solid Oxide Fuel Cells Using LaNi ( Fe ) O3 Electrodes , 2006 .

[11]  J. Fergus.  Metallic interconnects for solid oxide fuel cells , 2005 .

[12]  Zhenguo Yang,et al.  SOFC performance with Fe-Cr-Mn alloy interconnect , 2005 .

[13]  L. C. Jonghe,et al.  Protective coating on stainless steel interconnect for SOFCs: oxidation kinetics and electrical properties , 2005 .

[14]  A. Horsewell,et al.  Chemical and Structural Changes in Manganese‐Doped Yttria‐Stabilized Zirconia Studied by Electron Energy Loss Spectroscopy Combined with Electron Diffraction , 2004 .

[15]  V. Birss,et al.  Chromium Poisoning of LSM-YSZ SOFC Cathodes I. Detailed Study of the Distribution of Chromium Species at a Porous, Single-Phase Cathode , 2004 .

[16]  K. S. Weil,et al.  Selection and Evaluation of Heat-Resistant Alloys for SOFC Interconnect Applications , 2003 .

[17]  Y. Xiong,et al.  Evaluation of Fe-Cr Alloys as Interconnects for Reduced Operation Temperature SOFCs , 2003 .

[18]  San Ping Jiang,et al.  A comparative investigation of chromium deposition at air electrodes of solid oxide fuel cells , 2002 .

[19]  T. Brylewski,et al.  Application of Fe–16Cr ferritic alloy to interconnector for a solid oxide fuel cell , 2001 .

[20]  B. Steele,et al.  Cobalt additive for lowering the sintering temperature of yttria-stabilized zirconia , 2001 .

[21]  Y. Matsuzaki,et al.  Dependence of SOFC Cathode Degradation by Chromium-Containing Alloy on Compositions of Electrodes and Electrolytes , 2001 .

[22]  S. Jiang,et al.  Deposition of Chromium Species at Sr‐Doped LaMnO3 Electrodes in Solid Oxide Fuel Cells. I. Mechanism and Kinetics , 2000 .

[23]  S. Badwal,et al.  Interaction between chromia forming alloy interconnects and air electrode of solid oxide fuel cells , 1997 .

[24]  Mogens Bjerg Mogensen,et al.  Investigations of metallic alloys for use as interconnects in solid oxide fuel cell stacks , 1996, Journal of Materials Science.

[25]  W. Weppner,et al.  Characteristics of transition metal oxide doping of YSZ: structure and electrical properties , 1996 .

[26]  C. C. Appel.  Zirconia stabilized by Y and Mn: A microstructural characterization , 1995 .

[27]  Taniguchi Shunsuke,et al.  Degradation phenomena in the cathode of a solid oxide fuel cell with an alloy separator , 1995 .

[28]  Harumi Yokokawa,et al.  Electrical properties of transition-metal-doped YSZ , 1992 .

[29]  A. J. Burggraaf,et al.  Microstructure and thermal stability of Fe, Ti, and Ag implanted yttria-stabilized zirconia , 1991 .