Study of the phase transition and the thermal nitridation of nanocrystalline sol–gel titania films

Abstract Nanocrystalline titania films were prepared by a complexing agent-assisted sol–gel method and converted to titanium nitride by a thermal nitridation process. The effect of acetylacetone (AcAc), diethanolamine (DEA) and acid catalysts (HCl and HNO 3 ) on the structure and morphology of the heat-treated titania films and on their nitridation products was examined by FTIR spectroscopy, X-ray diffraction (XRD) and atomic force microscopy (AFM). The carbothermal reduction of titania during the nitridation process with the formation of carboxynitrides has been considered. The results showed that the oxide to nitride transition strongly depends on the complexing agent used to prepare the titania films. The XRD results indicated the dependence of the lattice parameter of the nitridation product on the complexing agent or acid catalyst: AcAc and DEA lead to TiN x with a lattice parameter α close to the theoretical value, while with HCl the lattice parameter was found sensibly lower showing the presence of an oxynitride. These results are accounted for by the effect of complexing agents and acid catalysts on the size of both TiO 2 and TiN grains and the different reactivity of the anatase and rutile phases. The possibility of tailoring the composition and morphology of TiN films by using complexing agents is envisaged.

[1]  K. Ishizu,et al.  Preparation of a TiO2 based multiple layer thin film photocatalyst , 1998 .

[2]  T. Yoko,et al.  Nitridation of TiO2 fibres prepared by the sol-gel method , 1987 .

[3]  J. Johnston,et al.  Carbothermal synthesis of titanium nitride , 1992, Journal of Materials Science.

[4]  G. Martinez,et al.  Optical characterization of titania thin films produced by the solgel method and doped with co(2+) at different concentrations. , 1998, Applied optics.

[5]  F. Mizukami,et al.  Preparation and properties of TiO2–SiO2 (1 : 1) films prepared by a complexing agent-assisted sol–gel process , 1997 .

[6]  K. Kohno.  Nitridation of the sol-gel derived TiO2 coating films and the infrared ray reflection , 1992 .

[7]  N. Kaufherr,et al.  X‐ray photoelectron spectroscopy studies of thin films of TiNx having different annealing histories , 1985 .

[8]  R. Shaviv.  Synthesis of TiN and TiNxCy: optimization of reaction parameters , 1996 .

[9]  H. Störi,et al.  Plasma‐assisted chemical vapor deposition of titanium nitride in a capacitively coupled radio‐frequency discharge , 1989 .

[10]  S. Suib,et al.  Chemical vapor deposition TiN coating on silicon carbide coated boron fibers , 1991 .

[11]  W. R. Runyan,et al.  Semiconductor integrated circuit processing technology , 1990 .

[12]  R. Smoluchowski,et al.  Elements of X‐Ray Diffraction , 1957 .

[13]  M. J. Vasile,et al.  The characterization of titanium nitride by x-ray photoelectron spectroscopy and Rutherford backscattering , 1990 .

[14]  E. Giannelis,et al.  Effect of Nitridation Rate on the Composition and Conductivity of Titanium Nitride Films Prepared from Sol–Gel Titania , 1991 .

[15]  C. Sanchez,et al.  Synthesis and characterization of titanium oxide-based gels synthesized from acetate modified titanium butoxide precursors , 1994 .

[16]  Y. Matsumura,et al.  Reactivity of nitrogen in titanium nitride film formation by the reactive ion plating process , 1993 .

[17]  E. Giannelis,et al.  EFFECT OF HEATING RATE ON THE SINTERING OF TITANIUM-DIOXIDE THIN-FILMS - COMPETITION BETWEEN DENSIFICATION AND CRYSTALLIZATION , 1991 .

[18]  C. Trapalis,et al.  Optical properties of very thin (<100 nm) sol–gel TiO2 films , 1998 .