Effect of dose methods of a synthetic organic polymer and PFC on floc properties in dyeing wastewater coagulation process

[1]  P. Huber,et al.  Conditions for cost-efficient reuse of biological sludge for paper and board manufacturing , 2014 .

[2]  Hanqing Yu,et al.  Synthesis, characterization and application of a novel starch-based flocculant with high flocculation and dewatering properties. , 2013, Water research.

[3]  B. Gao,et al.  Characterization of size, strength and structure of aluminum-polymer dual-coagulant flocs under different pH and hydraulic conditions. , 2013, Journal of hazardous materials.

[4]  O. Chiavone-Filho,et al.  Coagulation of indigo blue present in dyeing wastewater using a residual bittern , 2013 .

[5]  M. Nasser,et al.  Effect of polyelectrolytes on the degree of flocculation of papermaking suspensions , 2013 .

[6]  J. Hawari,et al.  Isolation and characterization of herbaceous lignins for applications in biomaterials , 2013 .

[7]  Huifang Wu,et al.  Impacts of operating parameters on oxidation-reduction potential and pretreatment efficacy in the pretreatment of printing and dyeing wastewater by Fenton process. , 2012, Journal of hazardous materials.

[8]  J. Rintala,et al.  Thermophilic anaerobic digestion of pulp and paper mill primary sludge and co-digestion of primary and secondary sludge. , 2012, Water research.

[9]  B. Gao,et al.  Effect of second coagulant addition on coagulation efficiency, floc properties and residual Al for humic acid treatment by Al13 polymer and polyaluminum chloride (PACl). , 2012, Journal of hazardous materials.

[10]  John Gregory,et al.  Adsorption and flocculation by polymers and polymer mixtures. , 2011, Advances in colloid and interface science.

[11]  Xihui Zhang,et al.  Effects of humic acid on physical and hydrodynamic properties of kaolin flocs by particle image velocimetry. , 2011, Water research.

[12]  A. Zouboulis,et al.  Preparation, characterisation and application of novel composite coagulants for surface water treatment. , 2011, Water research.

[13]  M. A. Yukselen,et al.  Flocculating performances of exopolysaccharides produced by a halophilic bacterial strain cultivated on agro-industrial waste. , 2011, Bioresource technology.

[14]  Xiaorong Xu,et al.  Synthesis of lignin-base cationic flocculant and its application in removing anionic azo-dyes from simulated wastewater. , 2010, Bioresource technology.

[15]  Mika Sillanpää,et al.  Natural organic matter removal by coagulation during drinking water treatment: a review. , 2010, Advances in colloid and interface science.

[16]  J. Gregory,et al.  The effect of additional coagulant on the re-growth of alum-kaolin flocs , 2010 .

[17]  J. Gregory,et al.  Breakage and regrowth of Al-humic flocs--effect of additional coagulant dosage. , 2010, Environmental science & technology.

[18]  J. Gregory,et al.  Breakage and re-growth of flocs formed by charge neutralization using alum and polyDADMAC. , 2010, Water research.

[19]  B. Gao,et al.  Effect of shear force and solution pH on flocs breakage and re-growth formed by nano-Al(13) polymer. , 2010, Water research.

[20]  H. Qiu,et al.  Characteristic of a novel composite inorganic polymer coagulant-PFAC prepared by hydrochloric pickle liquor. , 2009, Journal of hazardous materials.

[21]  B. Gao,et al.  Comparison of coagulation behavior and floc structure characteristic of different polyferric-cationic polymer dual-coagulants in humic acid solution. , 2009, Water research.

[22]  B. Gao,et al.  The characterization and flocculation efficiency of composite flocculant iron salts–polydimethyldiallylammonium chloride , 2008 .

[23]  I. M. Mishra,et al.  Decolorization and COD reduction of dyeing wastewater from a cotton textile mill using thermolysis and coagulation. , 2008, Journal of hazardous materials.

[24]  J. Qu,et al.  Enhanced coagulation for high alkalinity and micro-polluted water: the third way through coagulant optimization. , 2008, Water research.

[25]  John Gregory,et al.  Organic polyelectrolytes in water treatment. , 2007, Water research.

[26]  Tiantian Liu,et al.  Performance of combined process of anoxic baffled reactor-biological contact oxidation treating printing and dyeing wastewater. , 2007, Bioresource technology.

[27]  Dongsheng Wang,et al.  Characterization of floc size, strength and structure under various coagulation mechanisms , 2006 .

[28]  H. C. Braga,et al.  Simultaneous production of impurity-free water and magnetite from steel pickling liquors by microwave-hydrothermal processing , 2006 .

[29]  Bruce Jefferson,et al.  Floc structural characteristics using conventional coagulation for a high doc, low alkalinity surface water source. , 2006, Water research.

[30]  C. J. Beauchamp,et al.  Confirmation of E. coli among other thermotolerant coliform bacteria in paper mill effluents, wood chips screening rejects and paper sludges. , 2006, Water research.

[31]  B Jefferson,et al.  A review of floc strength and breakage. , 2005, Water research.

[32]  J. Sáez,et al.  Improvement of coagulation-flocculation process using anionic polyacrylamide as coagulant aid. , 2005, Chemosphere.

[33]  K. Carlson,et al.  Floc morphology and cyclic shearing recovery: comparison of alum and polyaluminum chloride coagulants. , 2004, Water research.

[34]  D Georgiou,et al.  Treatment of cotton textile wastewater using lime and ferrous sulfate. , 2003, Water research.

[35]  J. Sáez,et al.  Microscopic observation of particle reduction in slaughterhouse wastewater by coagulation-flocculation using ferric sulphate as coagulant and different coagulant aids. , 2003, Water research.

[36]  J. Gregory,et al.  Relative importance of charge neutralization and precipitation on coagulation of Kaolin with PACI: effect of sulfate ion. , 2002, Environmental science & technology.