An experimental and numerical study of the expansion forming of a thick-walled microgroove tube

Abstract CO2 refrigerant-based air conditioning and refrigeration (ACR) is an increasing concern in many industrial sectors for its zero ozone depletion potential. One of the major requirements in its application is the forming technology of thick-walled tube according to the extremely high pressure working conditions of the ACR system. This article presents a study on the expansion process joining the thick-walled microgroove copper tube to aluminium fins. Experiments of the forming process have been carried out. Finite-element models are developed to investigate the deformation of overall and local structures. Evaluation of the joining quality along the longitude axis of the tube is first attempted. The agreement of the results on the contact surface profile confirms that the joint is far away from full contact in the axial section. Formation mechanism of the unexpected contact status lies in displacement of the contact points along the section of the fin collar, which is mainly related to the expanding ratio. To improve the forming quality, discussion on processing parameters and die geometry is conducted. Results show that the expanding ratio is the major factor influencing the thermal—mechanical performance of the joint and 2–6 per cent can be the comprehensively beneficial range for a thick-walled ACR tube; average contact pressure can reach 1.76 Mpa under proper set. The results are helpful for improving the energy efficiency ratio performance of the natural refrigerant-based system.

[1]  A. Chaaban,et al.  Tube-Tubesheet Joint: A Proposed Equation for the Equivalent Sleeve Diameter Used in the Single-Tube Model , 1992 .

[2]  Leroy S. Fletcher,et al.  Review of Models for Thermal Contact Conductance of Metals , 1997 .

[3]  Friedrich Kauf,et al.  Determination of the optimum high pressure for transcritical CO2-refrigeration cycles , 1999 .

[4]  Armin Hafner,et al.  Development of compact heat exchangers for CO2 air-conditioning systems☆ , 1998 .

[5]  Ying-hong Peng,et al.  Experimental and numerical study of warm deep drawing of AZ31 magnesium alloy sheet , 2007 .

[6]  Liu Hongsheng,et al.  Experimental investigation of a CO2 automotive air conditioner , 2005 .

[7]  P. Bariani,et al.  Contact pressure distribution in circular tube expansion using a conical plug , 1982 .

[8]  Paulo A.F. Martins,et al.  Expansion and reduction of thin-walled tubes using a die: Experimental and theoretical investigation , 2006 .

[9]  M. Michael Yovanovich,et al.  Review of Elastic and Plastic Contact Conductance Models: Comparison with Experiment , 1994 .

[11]  Chang Nyung Kim,et al.  A study on the thermal contact conductance in fin–tube heat exchangers with 7 mm tube , 2006 .

[12]  Shi-Hong Zhang,et al.  Analysis on folding defects of inner grooved copper tubes during ball spin forming , 2007 .

[13]  S. Yokell,et al.  Expanded, and Welded-and-Expanded Tube-to-Tubesheet Joints , 1992 .

[14]  Ruzhu Wang,et al.  Perspectives for natural working fluids in China , 2006 .

[15]  M. S. Kim,et al.  Experimental studies on the evaporative heat transfer and pressure drop of CO2 in smooth and micro-fin tubes of the diameters of 5 and 9.52 mm , 2007 .

[16]  Andy Pearson,et al.  ICR0021 CARBON DIOXIDE - NEW USES FOR AN OLD REFRIGERANT , 2005 .