In microlithography, the necessity of using bottom antireflective coatings (BARCs) to reduce linewidth variations resulting from reflective notching and thin film interference effects has been largely demonstrated. We report a new methodology, based on a 2-D swing curve concept, to predict the lithographic performance of resist/BARC bilayers in a topographic situation to optimize the critical dimension (CD) range. Due to inherent planarization effects when coating on topography, both the resist and organic BARC thicknesses vary, as do the final reflectivity and CDs. As a consequence, it is not easy to determine the optimal BARC thicknesses and to predict the lithographic performance, taking into account topography effects over the whole chip. Usually, lithographic performance (CD swing curves) is measured or calculated using modeling over plane wafers. Over the topography of a real chip, however, the resist thickness can cover up to four periods of the swing curve, which means that lithographic performance over a real chip cannot be predicted using swing curves calculated or measured on plane wafers. We therefore propose a new method of representing the reflectivity and CD swing curves in two dimensions to evaluate the lithographic performance of the BARC/resist bilayer. A simulation algorithm is performed that enables the determination of both the optimal BARC thicknesses and the lithographic performance window over the whole chip. Practical examples are given demonstrating the role of such a simulation.
[1]
J. R. Sambles,et al.
Scattering-matrix approach to multilayer diffraction
,
1995
.
[2]
Patrick Jean Paniez,et al.
Bottom anti-reflective coatings: control of thermal processing
,
1996
.
[3]
Patrick Schiavone,et al.
Prediction of lithographic performance of resist/BARC bilayers in topographic situations: application to organic and inorganic BARCs
,
1997,
Advanced Lithography.
[4]
C. Mack.
New Kinetic Model for Resist Dissolution
,
1992
.
[5]
Robert A Norwood,et al.
Modeling of bottom antireflection layers: sensitivity to optical constants
,
1996,
Advanced Lithography.
[6]
P. Schiavone,et al.
PHYSICAL AND OPTICAL PROPERTIES OF AN ANTIREFLECTIVE LAYER BASED ON SIOXNY
,
1997
.
[7]
Wayne M. Moreau,et al.
Properties and performance of near-UV reflectivity control layers (RCL)
,
1994,
Advanced Lithography.
[8]
A. Schiltz,et al.
Bottom anti-reflective coatings for DUV lithography: determination of optimum thermal process conditions
,
1997
.