A review on 3D printed smart devices for 4D printing

[1]  Jae-Won Choi,et al.  Direct-print photopolymerization for 3D printing , 2017 .

[2]  Yan Zhang,et al.  3D Printed Graphene Based Energy Storage Devices , 2017, Scientific Reports.

[3]  Jae-Won Choi,et al.  Flexible Piezoresistive Sensors Embedded in 3D Printed Tires , 2017, Sensors.

[4]  Martin L. Dunn,et al.  Thermal cure effects on electromechanical properties of conductive wires by direct ink write for 4D printing and soft machines , 2017 .

[5]  Jae-Won Choi,et al.  Effect of degree of crosslinking and polymerization of 3D printable polymer/ionic liquid composites on performance of stretchable piezoresistive sensors , 2017 .

[6]  Xin Wang,et al.  3D printing of polymer matrix composites: A review and prospective , 2017 .

[7]  Chee Kai Chua,et al.  Material Evaluation and Process Optimization of CNT-Coated Polymer Powders for Selective Laser Sintering , 2016, Polymers.

[8]  SaariMatt,et al.  Fabrication and Analysis of a Composite 3D Printed Capacitive Force Sensor , 2016 .

[9]  Federico Parietti,et al.  Hot-melt extruded filaments based on pharmaceutical grade polymers for 3D printing by fused deposition modeling. , 2016, International journal of pharmaceutics.

[10]  Chee Kai Chua,et al.  3D printing by selective laser sintering of polypropylene feed channel spacers for spiral wound membrane modules for the water industry , 2016 .

[11]  M. Layani,et al.  3D Printing of Shape Memory Polymers for Flexible Electronic Devices , 2016, Advanced materials.

[12]  Flaviana Calignano,et al.  3D Printing of Conductive Complex Structures with In Situ Generation of Silver Nanoparticles , 2016, Advanced materials.

[13]  Aaron D. Price,et al.  Photopolymerization of 3D conductive polypyrrole structures via digital light processing , 2016, SPIE Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring.

[14]  Tian Li,et al.  Graphene Oxide‐Based Electrode Inks for 3D‐Printed Lithium‐Ion Batteries , 2016, Advanced materials.

[15]  Wei Gao,et al.  Application of 3D Printing for Smart Objects with Embedded Electronic Sensors and Systems , 2016 .

[16]  Yanfeng Lu,et al.  A Solvent and Initiator Free, Low-Modulus, Degradable Polyester Platform with Modular Functionality for Ambient-Temperature 3D Printing , 2016 .

[17]  Antonios G. Mikos,et al.  Extrusion-Based 3D Printing of Poly(propylene fumarate) in a Full-Factorial Design. , 2016, ACS biomaterials science & engineering.

[18]  Fang Qian,et al.  Supercapacitors Based on Three-Dimensional Hierarchical Graphene Aerogels with Periodic Macropores. , 2016, Nano letters.

[19]  ChoiJin,et al.  4D Printing Technology: A Review , 2015 .

[20]  Jae-Won Choi,et al.  Direct-print/cure as a molded interconnect device (MID) process for fabrication of automobile cruise controllers , 2015 .

[21]  A. Studart,et al.  Multimaterial magnetically assisted 3D printing of composite materials , 2015, Nature Communications.

[22]  Wojciech Matusik,et al.  MultiFab , 2015, ACM Trans. Graph..

[23]  Xiaofeng Cui,et al.  Improved properties of bone and cartilage tissue from 3D inkjet-bioprinted human mesenchymal stem cells by simultaneous deposition and photocrosslinking in PEG-GelMA , 2015, Biotechnology Letters.

[24]  Liwei Lin,et al.  Erratum: 3D-printed microelectronics for integrated circuitry and passive wireless sensors , 2015, Microsystems & Nanoengineering.

[25]  Robert J. Wood,et al.  A 3D-printed, functionally graded soft robot powered by combustion , 2015, Science.

[26]  Yong Liu,et al.  3D printing of smart materials: A review on recent progresses in 4D printing , 2015 .

[27]  Jae-Won Choi,et al.  Combined 3D printing technologies and material for fabrication of tactile sensors , 2015 .

[28]  Shannon E Bakarich,et al.  4D Printing with Mechanically Robust, Thermally Actuating Hydrogels. , 2015, Macromolecular rapid communications.

[29]  F. Piller,et al.  Economic implications of 3D printing: Market structure models in light of additive manufacturing revisited , 2015 .

[30]  Chee Meng Benjamin Ho,et al.  A review on 3D printed bioimplants , 2015 .

[31]  E. Farjami,et al.  Diffuse reflectance infrared spectroscopic identification of dispersant/particle bonding mechanisms in functional inks. , 2015, Journal of visualized experiments : JoVE.

[32]  Alexandra M. Golobic,et al.  Highly compressible 3D periodic graphene aerogel microlattices , 2015, Nature Communications.

[33]  Alexandra L. Rutz,et al.  Three-dimensional printing of high-content graphene scaffolds for electronic and biomedical applications. , 2015, ACS nano.

[34]  D. Therriault,et al.  3D printing of a multifunctional nanocomposite helical liquid sensor. , 2015, Nanoscale.

[35]  SaariMatt,et al.  Fiber Encapsulation Additive Manufacturing: An Enabling Technology for 3D Printing of Electromechanical Devices and Robotic Components , 2015 .

[36]  D. Prasad.  Additive Manufacturing–A Brief Foray into the Advancements in Manufacturing Technologies , 2015 .

[37]  D L Bader,et al.  Development and validation of a 3D-printed interfacial stress sensor for prosthetic applications. , 2015, Medical engineering & physics.

[38]  Bobby B. Lyle,et al.  ACTIVE DEVICE FABRICATION USING FIBER ENCAPSULATION ADDITIVE MANUFACTURING , 2015 .

[39]  Ramesh Raskar,et al.  Active Printed Materials for Complex Self-Evolving Deformations , 2014, Scientific Reports.

[40]  Hermann Seitz,et al.  A new Micro-Stereolithography-System based on Diode Laser Curing (DLC) , 2014 .

[41]  Eujin Pei,et al.  4D Printing: dawn of an emerging technology cycle , 2014 .

[42]  Daniel M. Vogt,et al.  Embedded 3D Printing of Strain Sensors within Highly Stretchable Elastomers , 2014, Advanced materials.

[43]  Martin L. Dunn,et al.  Active origami by 4D printing , 2014 .

[44]  Seung Ki Moon,et al.  Application of 3D printing technology for designing light-weight unmanned aerial vehicle wing structures , 2014, International Journal of Precision Engineering and Manufacturing-Green Technology.

[45]  Ryan B. Wicker,et al.  3D Printing multifunctionality: structures with electronics , 2014 .

[46]  Skylar Tibbits,et al.  4D Printing: Multi‐Material Shape Change , 2014 .

[47]  Robert Bogue,et al.  3D printing: the dawn of a new era in manufacturing? , 2013 .

[48]  J. Lewis,et al.  3D Printing of Interdigitated Li‐Ion Microbattery Architectures , 2013, Advanced materials.

[49]  M. Layani,et al.  UV crosslinkable emulsions with silver nanoparticles for inkjet printing of conductive 3D structures , 2013 .

[50]  Giovanni Nino,et al.  Conformal printing of sensors on 3D and flexible surfaces using aerosol jet deposition , 2013, Smart Structures.

[51]  Thomas A. Campbell,et al.  3D printing of multifunctional nanocomposites , 2013 .

[52]  Matthew B Hoy.  3D Printing: Making Things at the Library , 2013, Medical reference services quarterly.

[53]  David A. Hutchins,et al.  A Simple, Low-Cost Conductive Composite Material for 3D Printing of Electronic Sensors , 2012, PloS one.

[54]  M. Dunn,et al.  Photo-origami—Bending and folding polymers with light , 2012 .

[55]  Ryan B. Wicker,et al.  Integrating stereolithography and direct print technologies for 3D structural electronics fabrication , 2012 .

[56]  Jennifer T. Bernhard,et al.  DIRECT-WRITE ASSEMBLY OF FUNCTIONAL INKS FOR PLANAR AND 3D MICROSTRUCTURES , 2011 .

[57]  Syed H. Masood,et al.  Thermo-mechanical properties of a highly filled polymeric composites for Fused Deposition Modeling , 2011 .

[58]  J. Lewis,et al.  Conformal Printing of Electrically Small Antennas on Three‐Dimensional Surfaces , 2011, Advanced materials.

[59]  Sung-Hoon Ahn,et al.  Direct metal printing of 3D electrical circuit using rapid prototyping , 2009 .

[60]  Ian M. Hutchings,et al.  Direct Writing Technology Advances and Developments , 2008 .

[61]  J. A. Lewis.  Direct Ink Writing of 3D Functional Materials , 2006 .

[62]  Hod Lipson,et al.  Freeform fabrication of ionomeric polymer‐metal composite actuators , 2006, Rapid Prototyping Journal.

[63]  Ryan B. Wicker,et al.  Mesoscale RF relay enabled by integrated rapid manufacturing , 2006 .

[64]  Chee Kai Chua,et al.  Building Porous Biopolymeric Microstructures for Controlled Drug Delivery Devices Using Selective Laser Sintering , 2006 .

[65]  Ryan B. Wicker,et al.  Hybrid manufacturing: Integrating direct write and stereolithography , 2005 .

[66]  John Evans,et al.  Formulation and multilayer jet printing of ceramic inks , 2004 .

[67]  C. V. van Blitterswijk,et al.  Design of porous scaffolds for cartilage tissue engineering using a three-dimensional fiber-deposition technique. , 2004, Biomaterials.

[68]  Joseph Cesarano,et al.  Piezoelectric properties of 3-X periodic Pb(ZrxTi1−x)O3–polymer composites , 2002 .

[69]  Brian Derby,et al.  Ink-Jet Printing of Wax-Based Alumina Suspensions , 2001 .

[70]  M. Cima,et al.  Oral dosage forms fabricated by three dimensional printing. , 2000, Journal of controlled release : official journal of the Controlled Release Society.