A Joining Procedure and Synchronization for TSCH-RPL Wireless Sensor Networks

Wireless Sensor Networks have become a key enabler for Industrial Internet of Things (IoT) applications; however, to adapt to the derived robust communication requirements, deterministic and scheduled medium access should be used, along with other features, such as channel hopping and frequency diversity. Implementing these mechanisms requires a correct synchronization of all devices in the network, a stage in deployment that can lead to non-operational networks. The present article presents an analysis of such situations and possible solutions, including the common current approaches and recommendations, and proposes a new beacon advertising method based on a specific Trickle Timer for the Medium Access Control (MAC) Time-Slotted Channel Hopping (TSCH) layer, decoupling from the timers in the network and routing layers. With this solution, improvements in connection success, time to join, and energy consumption can be obtained for the widely extended IEEE802.15.4e standard.

[1]  Pascale Minet,et al.  Beacon Advertising in an IEEE 802.15.4e TSCH Network for Space Launch Vehicles , 2017 .

[2]  Thomas Watteyne,et al.  Orchestra: Robust Mesh Networks Through Autonomously Scheduled TSCH , 2015, SenSys.

[3]  Thomas Watteyne,et al.  Adaptive synchronization in multi-hop TSCH networks , 2015, Comput. Networks.

[4]  Simon Duquennoy,et al.  Competition: Adaptive Time-Slotted Channel Hopping , 2017, EWSN.

[5]  Giuseppe Anastasi,et al.  From IEEE 802.15.4 to IEEE 802.15.4e: A Step Towards the Internet of Things , 2014, Advances onto the Internet of Things.

[6]  Maria Rita Palattella,et al.  Using IEEE 802.15.4e Time-Slotted Channel Hopping (TSCH) in the Internet of Things (IoT): Problem Statement , 2015, RFC.

[7]  Thomas Watteyne,et al.  Adaptive Synchronization in IEEE802.15.4e Networks , 2014, IEEE Transactions on Industrial Informatics.

[8]  Eleonora Borgia,et al.  The Internet of Things vision: Key features, applications and open issues , 2014, Comput. Commun..

[9]  Simon Duquennoy,et al.  TSCH and 6 TiSCH for Contiki : Challenges , Design and Evaluation , 2017 .

[10]  Paulo Leitão,et al.  Industrial automation based on cyber-physical systems technologies: Prototype implementations and challenges , 2016, Comput. Ind..

[11]  Simon Duquennoy,et al.  Microsecond-Accuracy Time Synchronization Using the IEEE 802.15.4 TSCH Protocol , 2016, 2016 IEEE 41st Conference on Local Computer Networks Workshops (LCN Workshops).

[12]  Younghan Kim,et al.  An efficient joining scheme in IEEE 802.15.4e , 2015, 2015 International Conference on Information and Communication Technology Convergence (ICTC).

[13]  Gennaro Boggia,et al.  Fast network joining algorithms in industrial IEEE 802.15.4 deployments , 2018, Ad Hoc Networks.

[14]  Sajal K. Das,et al.  Improving Network Formation in 6TiSCH Networks , 2019, IEEE Transactions on Mobile Computing.

[15]  H. T. Mouftah,et al.  A Survey of Beacon-Enabled IEEE 802.15.4 MAC Protocols in Wireless Sensor Networks , 2014, IEEE Communications Surveys & Tutorials.

[16]  Gennaro Boggia,et al.  Fast join and synchronization schema in the IEEE 802.15.4e MAC , 2015, 2015 IEEE Wireless Communications and Networking Conference Workshops (WCNCW).

[17]  Sang-Hwa Chung,et al.  A fast joining scheme based on channel quality for IEEE802.15.4e TSCH in severe interference environment , 2017, 2017 Ninth International Conference on Ubiquitous and Future Networks (ICUFN).

[18]  Younghan Kim,et al.  A rapid joining scheme based on fuzzy logic for highly dynamic IEEE 802.15.4e time-slotted channel hopping networks , 2016, Int. J. Distributed Sens. Networks.

[19]  Pascale Minet,et al.  Building an IEEE 802.15.4e TSCH network , 2016, 2016 IEEE 35th International Performance Computing and Communications Conference (IPCCC).

[20]  Lu Wang,et al.  A simulative study of network association delays in IEEE 802.15.4e TSCH networks , 2017, 2017 IEEE 18th International Symposium on A World of Wireless, Mobile and Multimedia Networks (WoWMoM).