Development of Engine Model Using Modulization Method for EMS Verification through MIL and HIL

[1]  A. Zuger.  A New Approach to , 2013 .

[2]  Bo-Chiuan Chen,et al.  New Charging Model Using Variable Valve Train for HIL Simulation , 2011 .

[3]  Lukas Walter,et al.  Analysis of Transient Drive Cycles using CRUISE-BOOST Co-Simulation Techniques , 2002 .

[4]  Dimitrios T. Hountalas,et al.  Development of a Detailed Friction Model to Predict Mechanical Losses at Elevated Maximum Combustion Pressures , 2001 .

[5]  Myoungho Sunwoo,et al.  A nonlinear dynamic modelling of SI engines for controller design , 2001 .

[6]  W. E. Tobler,et al.  Dynamic Modeling and Analysis of Automotive Multi-Port Electronic Fuel Delivery System , 1991 .

[7]  Mahmood Yaghoubi,et al.  Estimation of instantaneous local heat transfer coefficient in spark-ignition engines , 2010 .

[8]  Bo-Chiuan Chen,et al.  Heat transfer model for small-scale air-cooled spark-ignition four-stroke engines , 2006 .

[9]  Eugenio Brusa,et al.  TORSIONAL VIBRATION OF CRANKSHAFTS: EFFECTS OF NON-CONSTANT MOMENTS OF INERTIA , 1997 .

[10]  Richard Pearson,et al.  A Multi-Pipe Junction Model for One-Dimensional Gas-Dynamic Simulations , 2003 .

[11]  Bo-Chiuan Chen,et al.  Development of Hardware-In-the-Loop Simulation for Scooter Engine Control , 2006 .

[12]  H. Bischof,et al.  A New Approach to Functional and Software Structure for Engine Management Systems - BOSCH ME7 , 1998 .

[13]  J. Grau,et al.  Modelling Methodology of a Spark-Ignition Engine and Experimental Validation: Part I: Single-Zone Combustion Model , 2002 .

[14]  M. T. Overington,et al.  Transient Mixture Strength Excursions - An Investigation of Their Causes and the Development of a Constant Mixture Strength Fueling Strategy , 1981 .

[15]  Mahmood Yaghoubi,et al.  Analysis of local convective heat transfer in a spark ignition engine , 2008 .

[16]  G. Woschni.  A Universally Applicable Equation for the Instantaneous Heat Transfer Coefficient in the Internal Combustion Engine , 1967 .

[17]  Eric Rask,et al.  Simulation-Based Engine Calibration: Tools, Techniques, and Applications , 2004 .

[18]  S. Scala,et al.  Benefits of Using a Real-Time Engine Model During Engine ECU Development , 2003 .

[19]  J. K. Hedrick,et al.  Modeling and Validation of Automotive Engines for Control Algorithm Development , 1992 .

[20]  Bo-Chiuan Chen,et al.  Modulization of four-stroke single-cylinder spark-ignition air-cooled engine models , 2007 .