Hydrodynamic Characterization of a Nozzle Check Valve by Numerical Simulation

The ability to obtain correct estimates of the hydraulic characteristics of a nozzle check valve by finite-volume numerical simulation is discussed. The evaluation of the numerical results is performed by comparison of the computed pressure drops inside the valve with experimental measurements obtained on an industrial check valve. It is shown that, even with high mesh refinement, the obtained result is highly dependent on the choice of the turbulence model. The renormalization group theory (RNG) k-e model proves to be the more accurate to describe the flow inside the valve, which is characterized by repeated flow decelerations and accelerations and by boundary layer development under adverse pressure gradient. Pressure-drop and flow coefficients computed by adopting the RNG model agree well with the experimental values at different positions of the plug. The opening transient of the valve is also analyzed by an unsteady flow simulation where the motion of the plug is taken into account. The characteristic curve of the valve obtained in steady flow conditions is finally compared with the transient opening characteristic, highlighting a temporary increase in the pressure drop, which occurs because of a large unsteady separation region downstream of the plug.

[1]  I. Demirdzic,et al.  Space conservation law in finite volume calculations of fluid flow , 1988 .

[2]  Jim C. P. Liou,et al.  Swing Check Valve Characterization and Modeling During Transients , 2003 .

[3]  A. D. Gosman,et al.  The computation of compressible and incompressible recirculating flows by a non-iterative implicit scheme , 1986 .

[4]  S. Orszag,et al.  Development of turbulence models for shear flows by a double expansion technique , 1992 .

[5]  James A. Davis,et al.  Predicting Globe Control Valve Performance—Part I: CFD Modeling , 2002 .

[6]  B. Launder,et al.  The numerical computation of turbulent flows , 1990 .

[7]  Zachary Leutwyler,et al.  A Computational Study of Torque and Forces Due to Compressible Flow on a Butterfly Valve Disk in Mid-stroke Position , 2006 .

[8]  Yoshinobu Tsujimoto,et al.  CFD Simulations and Experiments of Flow Fluctuations Around a Steam Control Valve , 2007 .

[9]  A. Gosman,et al.  Solution of the implicitly discretised reacting flow equations by operator-splitting , 1986 .

[10]  James A. Davis,et al.  Predicting Globe Control Valve Performance—Part II: Experimental Verification , 2002 .

[11]  C. W. Hirt,et al.  An Arbitrary Lagrangian-Eulerian Computing Method for All Flow Speeds , 1997 .

[12]  H. L. Norris,et al.  Turbulent channel flow with a moving wavy boundary , 1975 .

[13]  Thong-See Lee,et al.  Numerical study on effects of check valve closure flow conditions on pressure surges in pumping station with air entrainment , 2001 .

[14]  Gábor Halász,et al.  DYNAMIC MODEL FOR SIMULATION OF CHECK VALVES IN PIPE SYSTEMS , 2002 .

[15]  Xiao Dong Chen,et al.  Visualization of the flow patterns in a high-pressure homogenizing valve using a CFD package , 1997 .