论文信息 - The Determination of the Compatibility of Metals through Static Friction Tests

The Determination of the Compatibility of Metals through Static Friction Tests

Static friction coefficients were measured for pairs consisting of 20 elemental metals. The 210 friction values were compared against the metallurgical compatibility ratings of the corresponding two phase alloy systems. Soft metals gave higher friction than harder metals, and at the same hardness level there was a steady trend to lower friction in going from like, to compatible, to intermediate, and then to incompatible combinations. The results are interpreted in terms of the surface energy model of friction, and used to derive values for the surface energy of adhesion of metal combinations in terms of their compatibility rating. Presented as an American Society of Lubrication Engineers paper at the ASME/ASLE Lubrication Conference held in Cincinnati, Ohio, October 13–15, 1970

E. Rabinowicz

[1] P. E. S. B. D.Sc.,et al. LXXIV. Friction of dry solids in vacuo , 1930 .

[2] M. Hansen,et al. Constitution of Binary Alloys , 1958 .

[3] Nathan H. Cook,et al. Physical measurement and analysis , 1963 .

[4] M. Hansen,et al. Constitution of binary alloys, first supplement , 1965 .

[5] A. D. Gee. The friction of gold-silver alloys against steel , 1965 .

[6] E. Rabinowicz,et al. Friction and Wear of Materials , 1966 .

[7] D. Buckley,et al. Friction and Wear of Hexagonal Metals and Alloys as Related to Crystal Structure and Lattice Parameters in Vacuum , 1966 .

[8] E. Rabinowicz. Lubrication of Metal Surfaces by Oxide Films , 1967 .

[9] A. D. Gee,et al. Sliding Characteristics of Silver Against Iron as Influenced by Oxygen Concentration , 1967 .

[10] F. Shunk,et al. Constitution of Binary Alloys Second Supplement , 1969 .