Impact of Rotor Geometry Optimization on the Off-Design ORC Turbine Performance

[1]  Janusz Badur,et al.  Design and computational fluid dynamics analysis of the last stage of innovative gas-steam turbine , 2023, Archives of Thermodynamics.

[2]  D. Zaniewski.  Comparison of an impulse and a reaction turbine stage for an ORC power plant , 2023, Archives of Thermodynamics.

[3]  G. Żywica,et al.  Experimental study of a 1 kW high-speed ORC microturbogenerator under partial load , 2022, Energy Conversion and Management.

[4]  G. Żywica,et al.  Experimental research of a micropower volumetric expander for domestic applications at constant electrical load , 2022, Sustainable Energy Technologies and Assessments.

[5]  Haoran Ma,et al.  Prediction of industrial power consumption in Jiangsu Province by regression model of time variable , 2022, Energy.

[6]  Piotr Klonowicz,et al.  Multi-objective optimization of an ORC power plant using one-dimensional design of a radial-inflow turbine with backswept rotor blades , 2021 .

[7]  S. Bykuć,et al.  Different design aspects of an Organic Rankine Cycle turbine for electricity production using a geothermal binary power plant , 2021, Energy Conversion and Management.

[8]  Natalia Szewczuk-Krypa,et al.  Comprehensive thermodynamic analysis of steam storage in a steam cycle in a different regime of work: A zero-dimensional and three-dimensional approach , 2021 .

[9]  Xudong Zhao,et al.  Advanced big-data/machine-learning techniques for optimization and performance enhancement of the heat pipe technology – A review and prospective study , 2021, Applied Energy.

[10]  Ł. Witanowski,et al.  Performance of the honeycomb type sealings in organic vapour microturbines , 2021, Energy.

[11]  Mohammed Issam Kabbaj,et al.  Prediction of solar energy guided by pearson correlation using machine learning , 2021 .

[12]  Shahroz Khan,et al.  Machine learning-based surrogate model for accelerating simulation-driven optimisation of hydropower Kaplan turbine , 2021, Renewable Energy.

[13]  G. Żywica,et al.  Experimental research on scroll expanders operating in parallel in an organic Rankine cycle system with a biomass boiler , 2020 .

[14]  Michal Kolovratník,et al.  Customized ORC micro turbo-expanders - From 1D design to modular construction kit and prospects of additive manufacturing , 2020 .

[15]  T. Turunen-Saaresti,et al.  Experimental study of small scale and high expansion ratio ORC for recovering high temperature waste heat , 2020, Energy.

[16]  J. Badur,et al.  Comparative study of a bottoming SRC and ORC for Joule–Brayton cycle cooling modular HTR exergy losses, fluid-flow machinery main dimensions, and partial loads , 2020 .

[17]  Ł. Witanowski,et al.  Optimization of an axial turbine for a small scale ORC waste heat recovery system , 2020 .

[18]  Zhonghe Han,et al.  Analysis of the thermodynamic performance of the organic Rankine cycle (ORC) based on the characteristic parameters of the working fluid and criterion for working fluid selection , 2020 .

[19]  H. Spliethoff,et al.  Experimental investigation of modern ORC working fluids R1224yd(Z) and R1233zd(E) as replacements for R245fa , 2019, Applied Energy.

[20]  Vincenzo Dossena,et al.  Impact of shape-optimization on the unsteady aerodynamics and performance of a centrifugal turbine for ORC applications , 2018, Energy.

[21]  Markus Preißinger,et al.  Experimental characterization and comparison of an axial and a cantilever micro-turbine for small-scale Organic Rankine Cycle , 2018, Applied Thermal Engineering.

[22]  Yiping Dai,et al.  Construction and preliminary test of a geothermal ORC system using geothermal resource from abandoned oil wells in the Huabei oilfield of China , 2017 .

[23]  Tomasz Z. Kaczmarczyk,et al.  The impact of changes in the geometry of a radial microturbine stage on the efficiency of the micro CHP plant based on ORC , 2017 .

[24]  Piotr Lampart,et al.  A turbine based domestic micro ORC system , 2017 .

[25]  Marco Astolfi,et al.  A World Overview of the Organic Rankine Cycle Market , 2017 .

[26]  Tomasz Z. Kaczmarczyk,et al.  Experimental investigation of the domestic CHP ORC system in transient operating conditions , 2017 .

[27]  Ayad Al Jubori,et al.  An innovative small-scale two-stage axial turbine for low-temperature organic Rankine cycle , 2017 .

[28]  Isil Yazar,et al.  Comparison of various regression models for predicting compressor and turbine performance parameters , 2017 .

[29]  Huashan Li,et al.  Thermodynamic Analysis of Organic Rankine Cycle with Hydrofluoroethers as Working Fluids , 2017 .

[30]  Ayad Al Jubori,et al.  Three dimensional optimization of small-scale axial turbine for low temperature heat source driven organic Rankine cycle , 2017 .

[31]  Raya Al-Dadah,et al.  Minimization of loss in small scale axial air turbine using CFD modeling and evolutionary algorithm optimization , 2016 .

[32]  Christoph Wieland,et al.  Experimental study of an ORC (Organic Rankine Cycle) and analysis of R1233zd-E as a drop-in replacement for R245fa for low temperature heat utilization , 2016 .

[33]  Zbigniew Kozanecki,et al.  Design and numerical study of turbines operating with MDM as working fluid , 2015 .

[34]  Raya Al-Dadah,et al.  Prediction of Losses in Small Scale Axial Air Turbine Based on CFD Modelling , 2015 .

[35]  Markus Preißinger,et al.  Significance of loss correlations in performance prediction of small scale, highly loaded turbine stages working in Organic Rankine Cycles , 2014 .

[36]  Aleksandra Borsukiewicz-Gozdur,et al.  Design and performance measurements of an organic vapour turbine , 2014 .

[37]  Leonid Moroz,et al.  Axial Turbine Flow Path Design for an Organic Rankine Cycle Using R-245fa , 2013 .

[38]  Krzysztof Kosowski,et al.  Design and Investigations of a Micro-Turbine Flow Part , 2012 .

[39]  P. Lampart,et al.  Complex multidisciplinary optimization of turbine blading systems , 2012 .

[40]  Piotr Lampart,et al.  Increasing flow efficiency of high-pressure and low-pressure steam turbine stages from numerical optimization of 3D blading , 2005 .

[41]  Vincenzo Dossena,et al.  The Influence of Endwall Contouring on the Performance of a Turbine Nozzle Guide Vane , 1998 .

[42]  Jeffrey C. Lagarias,et al.  Convergence Properties of the Nelder-Mead Simplex Method in Low Dimensions , 1998, SIAM J. Optim..

[43]  Steen A. Sjolander,et al.  Influence of Leading-Edge Geometry on Profile Losses in Turbines at Off-Design Incidence: Experimental Results and an Improved Correlation , 1995 .

[44]  John D. Denton,et al.  The 1993 IGTI Scholar Lecture: Loss Mechanisms in Turbomachines , 1993 .

[45]  J. Dunham,et al.  Improvements to the Ainley-Mathieson Method of Turbine Performance Prediction , 1970 .

[46]  M. Feidt,et al.  The efficiency of turbomachinery in the zero- and three-dimensional approaches , 2021 .

[47]  G. Żywica,et al.  EXPERIMENTAL STUDY OF AN ULTRA-HIGH-SPEED ORC TURBOGENERATOR , 2021 .

[48]  P. Klonowicz,et al.  OPTIMIZATION OF THE LAST STAGE OF GAS-STEAM TURBINE USING A HYBRID METHOD , 2021 .

[49]  Gilles Louppe,et al.  Independent consultant , 2013 .

[50]  Margaret H. Wright,et al.  Nelder, Mead, and the other simplex method , 2012 .

[51]  John A. Nelder,et al.  A Simplex Method for Function Minimization , 1965, Comput. J..