论文信息 - Influence of Workpiece Materials on the Characteristics of the Layers by Electrical Discharge Coating - 字舞流文

Influence of Workpiece Materials on the Characteristics of the Layers by Electrical Discharge Coating

Keita Shimada | Masayoshi Mizutani | Tsunemoto Kuriyagawa | Chihiro Kato | Nobuyuki Sumi | T. Kuriyagawa | C. Kato | K. Shimada | M. Mizutani | Nobuyuki Sumi

[1] Noriki Fujita,et al. Evaluation of Coating and Wear Characteristics of Roll Surface Coated with TiC by Electrical Discharge Coating , 2016 .

[2] Masayoshi Mizutani,et al. Improved Cytocompatibility of Nanosecond-Pulsed Laser-Treated Commercially Pure Ti Surfaces , 2014, Int. J. Autom. Technol..

[3] Yoshiki Shimizu,et al. Fabrication of Titanium-Based Hard Coatings by Atmospheric Microplasma-Metal Organic Chemical Vapor Deposition Using Titanium Tetraisopropoxide , 2013, Int. J. Autom. Technol..

[4] Tadahiko Shinshi,et al. Positioning Characteristics of a MEMS Linear Motor Utilizing a Thin Film Permanent Magnet and DLC Coating , 2013, Int. J. Autom. Technol..

[5] Arata Kaneko,et al. Instability Phenomenon in Dip-Coating Process for Self-Assembly of Fine Particles and Design Countermeasures , 2011, Int. J. Autom. Technol..

[6] A. Goto,et al. Study of Si-containing amorphous layer by electrical discharge coating , 2011 .

[7] N. Mohri,et al. Surface Modification by Electrical Discharge Machining : Composite Electrode Method , 1993 .

[8] A. Goto,et al. Study of the Si-containing amorphous layer by electrical discharge coating , 2012 .

[9] A. Goto,et al. Study of improvement of TiC layer by electrical discharge coating , 2012 .

[10] N. Mohri,et al. Surface modification by means of the electrical discharge machining. , 1987 .