Electronically compensated current transformer modelling

The behaviour of electronically compensated current transformers is examined with reference to a model valid for frequencies ranging from industrial to ultra-acoustic both in steady-state and in transient conditions. The influence of the hysteresis and saturation effects is evidenced. A comparison with other proposed current transducers is also given. A quantitative treatment of the errors is given and a good agreement between simulation results and experimental data is obtained.

[1]  F. de Leon,et al.  Complete transformer model for electromagnetic transients , 1994 .

[2]  Harry A. Owen,et al.  High-frequency measurement techniques for magnetic cores , 1990 .

[3]  D. Jiles,et al.  Ferromagnetic hysteresis , 1983 .

[4]  Pasquale Daponte,et al.  Accurate Measurement of Electronic Ballast Power Losses , 1991 .

[5]  H. Baltes,et al.  Integrated semiconductor magnetic field sensors , 1986, Proceedings of the IEEE.

[6]  Oskars Petersons.  A Self-Balancing Current Comparator , 1966 .

[7]  S. R. Naidu,et al.  Simulation of the hysteresis phenomenon using Preisach's theory , 1990 .

[8]  Yahia Baghzouz,et al.  Voltage-dependent model for teaching transformer core nonlinearity , 1993 .

[9]  A permalloy current sensor , 1976 .

[10]  Chin E. Lin,et al.  Investigation of magnetizing inrush current in transformers. II. Harmonic analysis , 1993 .

[11]  Chin E. Lin,et al.  Investigation of magnetizing inrush current in transformers. I. Numerical simulation , 1993 .

[12]  R. D. Slater,et al.  Method of predicting transient-current patterns in transformers , 1973 .

[13]  Jacek Ryszard Przygodzki.  An improved two-transformer conductivity probe , 1994 .

[14]  Donald O. Pederson,et al.  Computer design aids for VLSI circuits , 1981 .

[15]  James Frame,et al.  Hysteresis Modeling in An Electro-Magnetic Transients Program , 1982, IEEE Transactions on Power Apparatus and Systems.

[16]  Domenico Grimaldi,et al.  Performance analysis on electronically compensated current transformers affected by conducted and radiated interferences , 1994 .

[17]  M. Naidu,et al.  Dynamic analysis of a current transformer during faults , 1986 .

[18]  D. Douglass.  Current Transformer Accuracy with Asymmetric and High Frequency Fault Currents , 1981, IEEE Transactions on Power Apparatus and Systems.

[19]  E. Dallago,et al.  A simulation model for the saturable reactor , 1988 .

[20]  P. N. Miljanic,et al.  An improved two-stage current transformer , 1991 .

[21]  N. Wakatsuki,et al.  AC Bias type magnetoresistive sensor , 1990, International Conference on Magnetics.

[22]  Ali Abur,et al.  Experimental evaluation of EMTP-based current transformer models for protective relay transient study , 1994 .

[23]  Ali Keyhani,et al.  Nonlinear modeling of magnetic saturation and hysteresis in an electromagnetic device , 1988 .

[24]  M. K. Vasantha,et al.  Current transformer performance for inrush current in power transformers , 1988 .

[25]  D. O'Kelly.  Simulation of transient and steady-state magnetisation characteristics with hysteresis , 1977 .

[26]  J.R. Bailey,et al.  Hysteresis models for system studies , 1976, IEEE Transactions on Power Apparatus and Systems.

[27]  H. W. Dommel,et al.  On modelling iron core nonlinearities , 1993 .

[28]  J. Sievert,et al.  A new current sensor based on the measurement of the apparent coercive field strength , 1989 .

[29]  P. Daponte,et al.  A technique to link experimental data to a simulation environment , 1990 .

[30]  P. Daponte,et al.  Simulation of electronic measurement transformers , 1990 .

[31]  S. Tumanski.  A new type of thin film magnetoresistive magnetometer--An analysis of circuit principles , 1984 .

[32]  N. Mohan,et al.  Current Transformer and Relay Performance in the Presence of Geomagnetically-Induced Currents , 1981, IEEE Transactions on Power Apparatus and Systems.

[33]  J. Lenz.  A review of magnetic sensors , 1990, Proc. IEEE.

[34]  D. Jiles,et al.  Theory of ferromagnetic hysteresis , 1986 .