Flexures for large stroke electrostatic actuation in MEMS

The stroke of a microelectromechanical systems (MEMS) stage suspended by a flexure mechanism and actuated by electrostatic comb-drives is limited by pull-in. A method to analyze the electrostatic stability of a flexure mechanism and to optimize the stroke with respect to the footprint of flexure mechanisms is presented. Four flexure mechanisms for large stroke are investigated; the standard folded flexure, the slaved folded flexure, the tilted folded flexure and the Watt flexure. Given a certain stroke and load force, the flexures are optimized to have a minimum wafer footprint. From these optimizations it is concluded that the standard folded flexure mechanism is the best flexure mechanism for relatively small strokes (up to ±40 μm) and for larger strokes it is better to use the tilted folded flexure. Several optimized flexure mechanisms have been fabricated and experimentally tested to reach a stroke of ±100 μm. The displacement of the fabricated stages as a function of the actuation voltage could be predicted with 82% accuracy, limited by the fairly large tolerances of our fabrication process.

[1]  Dannis Michel Brouwer,et al.  Deflection of an Eccentric Tooth of a Comb Drive in an Electrostatic Field , 2013 .

[2]  R. H. Munnig Schmidt,et al.  Fast response thermal linear motor with reduced power consumption , 2009 .

[3]  Dannis Michel Brouwer,et al.  Large deflection stiffness analysis of parallel prismatic leaf-spring flexures taking into account shearing, constrained warping and anticlastic curving effects , 2013 .

[4]  M. D. de Boer,et al.  Black silicon method X: a review on high speed and selective plasma etching of silicon with profile control: an in-depth comparison between Bosch and cryostat DRIE processes as a roadmap to next generation equipment , 2009 .

[5]  Dannis Michel Brouwer,et al.  Position control of a MEMS stage with integrated sensor , 2011 .

[6]  Philip Dowd,et al.  Tilted folded-beam suspension for extending the stable travel range of comb-drive actuators , 2003 .

[7]  William C. Tang,et al.  Laterally Driven Polysilicon Resonant Microstructures , 1989 .

[8]  L. C. Fortgens,et al.  The Micronium—A Musical MEMS Instrument , 2012, Journal of Microelectromechanical Systems.

[9]  Dannis Michel Brouwer,et al.  Analytical and experimental investigation of a parallel leaf spring guidance , 2009 .

[10]  R V Jones,et al.  Some uses of elasticity in instrument design , 1962 .

[11]  M. A. Michalicek,et al.  Characterization of electrothermal actuators and arrays fabricated in a four-level, planarized surface-micromachined polycrystalline silicon process , 1997, Proceedings of International Solid State Sensors and Actuators Conference (Transducers '97).

[12]  T. Kenny,et al.  Design of large deflection electrostatic actuators , 2003 .

[13]  Max T. Hou,et al.  Extending displacements of comb drive actuators by adding secondary comb electrodes , 2006 .

[14]  Michael Curt Elwenspoek,et al.  Comb-drive actuators for large displacements , 1996 .

[15]  J. E. Snell,et al.  A vapour etching technique for the photolithography of silicon dioxide , 1966 .

[16]  Ronald G.K.M. Aarts,et al.  Design and Performance Optimization of Large Stroke Spatial Flexures , 2014 .

[17]  Dannis Michel Brouwer,et al.  Long-range Elastic Guidance Mechanisms for Electrostatic Comb-drive Actuators , 2010 .

[18]  S. Awtar,et al.  Note: an asymmetric flexure mechanism for comb-drive actuators. , 2012, The Review of scientific instruments.

[19]  Shorya Awtar,et al.  Characteristics of Beam-Based Flexure Modules , 2007 .

[20]  Jonathan B. Hopkins,et al.  Synthesis of multi-degree of freedom, parallel flexure system concepts via freedom and constraint topology (FACT). Part II: Practice , 2010 .

[21]  J. Gorman,et al.  Large Stroke Electrostatic Comb-Drive Actuators Enabled by a Novel Flexure Mechanism , 2013, Journal of Microelectromechanical Systems.

[22]  John D. Grade,et al.  Advanced, vibration-resistant, comb-drive actuators for use in a tunable laser source , 2004 .

[23]  Jan B. Jonker,et al.  SPACAR — Computer Program for Dynamic Analysis of Flexible Spatial Mechanisms and Manipulators , 1990 .

[24]  T. Hubbard,et al.  Time and frequency response of two-arm micromachined thermal actuators , 2003 .

[25]  Chengkuo Lee,et al.  Design and modeling for comb drive actuator with enlarged static displacement , 2004 .

[26]  J. P. Meijaard,et al.  Validation of flexible beam elements in dynamics programs , 1996 .

[27]  Jonathan B. Hopkins,et al.  Corrigendum to Synthesis of multi-degree of freedom, parallel flexure system concepts via Freedom and Constraint Topology (FACT)—Part I: Principles , 2010 .

[28]  John H. Comtois,et al.  Electrothermal actuators fabricated in four-level planarized surface micromachined polycrystalline silicon , 1997 .

[29]  David Elata,et al.  How slender can comb-drive fingers be? , 2005 .