Finite element, critical-plane, fatigue life prediction of simple and complex contact configurations

Abstract A finite element based critical plane approach is developed incorporating the Smith–Watson–Topper (SWT) multiaxial fatigue criterion. The approach is applied to a cylinder-on-flat fretting contact to predict failure locations, crack orientations and component lifetimes. The cylinder-on-flat conditions are based on a published study on contact size effects in fretting fatigue life prediction, in which volume-averaging of theoretically predicted contact stress and strain fields was required to emulate experimental trends. This contact size effect is captured by the finite element approach of the present work. The lifing methodology is subsequently applied to the more complex problem of a spline coupling susceptible to both fretting and plain fatigue cracking. The spline life and crack initiation predictions are compared with measured test results.

[1]  David A. Hills,et al.  INITIATION AND GROWTH OF FRETTING FATIGUE CRACKS IN THE PARTIAL SLIP REGIME , 1989 .

[2]  Darrell F. Socie,et al.  Multiaxial Fatigue Damage Models , 1987 .

[3]  David Nowell,et al.  The effect of rapidly varying contact stress fields on fretting fatigue , 2002 .

[4]  K. J. Miller,et al.  A Theory for Fatigue Failure under Multiaxial Stress-Strain Conditions , 1973 .

[5]  D. Hills,et al.  On the mechanics of fretting fatigue , 1988 .

[6]  Yves Berthier,et al.  Mechanics and materials in fretting , 1992 .

[7]  F. Hauser,et al.  Deformation and Fracture Mechanics of Engineering Materials , 1976 .

[8]  A. Fatemi,et al.  A CRITICAL PLANE APPROACH TO MULTIAXIAL FATIGUE DAMAGE INCLUDING OUT‐OF‐PHASE LOADING , 1988 .

[9]  T. Farris,et al.  Mechanics of fretting fatigue crack formation , 1995 .

[10]  D. Hills,et al.  A method based on asymptotics for the refined solution of almost complete partial slip contact problems , 2003 .

[11]  J Das,et al.  An evaluation of multiaxial fatigue life assessment methods for engineering components , 1999 .

[12]  Sean B. Leen,et al.  Fatigue life prediction for a barrelled spline coupling under torque overload , 2003 .

[13]  B. P. Volfson.  Stress Sources and Critical Stress Combinations for Splined Shaft , 1982 .

[14]  Sean B. Leen,et al.  Macroscopic fretting variables in a splined coupling under combined torque and axial load , 2001 .

[15]  Shankar Mall,et al.  An evaluation of parameters for predicting fretting fatigue crack initiation , 2000 .

[16]  K. N. Smith.  A Stress-Strain Function for the Fatigue of Metals , 1970 .

[17]  Sean B. Leen,et al.  The effect of slip regime on fretting wear-induced stress evolution , 2004 .