Frictional forces between cohesive powder particles studied by AFM.

A range of commercially important powders (hydrated alumina, limestone, titania and zeolite) and glass ballotini were attached to atomic force microscope cantilevers, and inter-particle friction forces studied in air using lateral force microscopy (LFM). The in situ calibration procedure for friction forces is described. LF images, line profiles, LF histograms, surface roughness, pull-off forces, and the load dependence of friction in the range 0-25 nN were studied for both particle-particle and particle-wall (steel) contacts. The single-particle friction results are discussed in terms of contact mechanics theory. Particle-particle contacts showed load-dependent friction, involving single asperity contacts (non-linear behaviour) or multi-asperity contacts (linear behaviour). Particle-wall contacts usually showed little load dependence and were more adhesive. The results are also related to shear stress-normal stress data (yield loci) for the same materials from bulk shear testers.

[1]  K. Kendall,et al.  Surface energy and the contact of elastic solids , 1971, Proceedings of the Royal Society of London. A. Mathematical and Physical Sciences.

[2]  J. Snapper.  Scratching the Surface , 2004 .

[3]  H. Bluhm,et al.  An AFM study of the tribological properties of NaCl (100) surfaces under moist air , 1998 .

[4]  P. Blau.  The significance and use of the friction coefficient , 2001 .

[5]  B. Briscoe.  Friction of Organic Polymers , 1992 .

[6]  Derek Geldart,et al.  Inter-particle forces in cohesive powders studied by AFM: effects of relative humidity, particle size and wall adhesion , 2003 .

[7]  M. Salmeron,et al.  Scratching the Surface: Fundamental Investigations of Tribology with Atomic Force Microscopy. , 1997, Chemical reviews.

[8]  H. Pollock,et al.  Adhesion Forces between Glass and Silicon Surfaces in Air Studied by AFM: Effects of Relative Humidity, Particle Size, Roughness, and Surface Treatment , 2002 .

[9]  B. Briscoe,et al.  A statistical analysis of the frictional forces generated between monofilaments during intermittent sliding , 1985 .

[10]  Jun Hu,et al.  ATOMIC-SCALE FRICTION AND WEAR OF MICA , 1995 .

[11]  M. Adams,et al.  Friction of Granular Non-Metals , 1992 .

[12]  Y. Ando.  The effect of relative humidity on friction and pull-off forces measured on submicron-size asperity arrays , 2000 .

[13]  Biggs,et al.  Microscopic and macroscopic effects of surface lubricant films in granular shear , 2000, Physical review. E, Statistical physics, plasmas, fluids, and related interdisciplinary topics.

[14]  B. V. Derjaguin,et al.  Effect of contact deformations on the adhesion of particles , 1975 .

[15]  R. Kaneko,et al.  Experimental observation of single-asperity friction at the atomic scale , 1996 .

[16]  Brian J. Briscoe,et al.  Tribology in Particulate Technology , 1987 .

[17]  Biggs,et al.  Lateral Force Microscopy Study of the Friction between Silica Surfaces. , 2000, Journal of colloid and interface science.

[18]  Robert W. Carpick,et al.  Calibration of frictional forces in atomic force microscopy , 1996 .

[19]  R. Jones,et al.  From Single Particle AFM Studies of Adhesion and Friction to Bulk Flow: Forging the Links , 2003 .

[20]  Stefano Longhi.  Spiral waves in optical parametric oscillators , 2001 .

[21]  L. Bergström,et al.  Silicon nitride granule friction measurements with an atomic force microscope: effect of humidity and binder concentration , 2001 .

[22]  Vladimir V. Tsukruk,et al.  Friction Force Microscopy Measurements: Normal and Torsional Spring Constants for V-Shaped Cantilevers , 1998 .

[23]  J. Archard.  Elastic deformation and the laws of friction , 1957, Proceedings of the Royal Society of London. Series A. Mathematical and Physical Sciences.