Investigation on thermal performance of water-cooled Li-ion pouch cell and pack at high discharge rate with U-turn type microchannel cold plate

[1]  Moo-Yeon Lee,et al.  Thermal Abuse Behavior of the LIR2450 Micro Coin Cell Battery Having Capacity of 120 mAh with Internal Short Circuit by Penetrating Element , 2020, Symmetry.

[2]  Wen Ye,et al.  Numerical investigation on a lithium ion battery thermal management utilizing a serpentine-channel liquid cooling plate exchanger , 2019, International Journal of Heat and Mass Transfer.

[3]  Yan Ran,et al.  Design optimization of bifurcating mini-channels cooling plate for rectangular Li-ion battery , 2019, International Journal of Heat and Mass Transfer.

[4]  Aikun Tang,et al.  Optimization design and numerical study on water cooling structure for power lithium battery pack , 2019, Applied Thermal Engineering.

[5]  K. Raahemifar,et al.  Heat and mass transfer modeling and investigation of multiple LiFePO4/graphite batteries in a pack at low C-rates with water-cooling , 2019, International Journal of Heat and Mass Transfer.

[6]  Xuning Feng,et al.  An experimental and analytical study of thermal runaway propagation in a large format lithium ion battery module with NCM pouch-cells in parallel , 2019, International Journal of Heat and Mass Transfer.

[7]  Y. Ran,et al.  Novel leaf-like channels for cooling rectangular lithium ion batteries , 2019, Applied Thermal Engineering.

[8]  Hoseong Lee,et al.  Review on battery thermal management system for electric vehicles , 2019, Applied Thermal Engineering.

[9]  Fangming Jiang,et al.  Minimization of thermal non-uniformity in lithium-ion battery pack cooled by channeled liquid flow , 2019, International Journal of Heat and Mass Transfer.

[10]  Yubai Li,et al.  Three-dimensional thermal modeling of Li-ion battery cell and 50 V Li-ion battery pack cooled by mini-channel cold plate , 2019, Applied Thermal Engineering.

[11]  Y. Ran,et al.  Study on thermal management of rectangular Li-ion battery with serpentine-channel cold plate , 2018, International Journal of Heat and Mass Transfer.

[12]  Moo-Yeon Lee,et al.  Cooling Performance Characteristics of 20 Ah Lithium-Ion Pouch Cell with Cold Plates along Both Surfaces , 2018, Energies.

[13]  Liwen Jin,et al.  Parametric study of forced air cooling strategy for lithium-ion battery pack with staggered arrangement , 2018 .

[14]  Wenjiong Cao,et al.  Thermal behavior study of discharging/charging cylindrical lithium-ion battery module cooled by channeled liquid flow , 2018 .

[15]  Moo-Yeon Lee,et al.  Heat transfer characteristics of the integrated heating system for cabin and battery of an electric vehicle under cold weather conditions , 2018 .

[16]  Ziping Feng,et al.  Non-uniform effect on the thermal/aging performance of Lithium-ion pouch battery , 2018 .

[17]  Byung Ha Kang,et al.  A Review of Recent Research on Automotive HVAC Systems for EVs , 2017 .

[18]  Massimiliana Carello,et al.  Transient thermal analysis of a lithium-ion battery pack comparing different cooling solutions for automotive applications , 2017 .

[19]  Richard Barney Carlson,et al.  Enabling fast charging – A battery technology gap assessment , 2017 .

[20]  A. N. Korti,et al.  Computational Investigation of Thermal Interaction Phenomena Between Two Adjacent Spheres Filled with Different Phase Change Materials (PCMs) , 2017 .

[21]  Ibrahim Dincer,et al.  Transient electrochemical heat transfer modeling and experimental validation of a large sized LiFePO4/graphite battery , 2017 .

[22]  Moo-Yeon Lee,et al.  A Novel Design for Lithium ion Battery Cooling using Mineral Oil , 2016 .

[23]  Ibrahim Dincer,et al.  Experimental and simulated temperature variations in a LiFePO4-20Ah battery during discharge process , 2016 .

[24]  Yanbao Ma,et al.  Thermal management for high power lithium-ion battery by minichannel aluminum tubes , 2016 .

[25]  M. Fowler,et al.  Thermal modeling and validation of temperature distributions in a prismatic lithium-ion battery at different discharge rates and varying boundary conditions , 2016 .

[26]  Jiuchun Jiang,et al.  Comparison of different cooling methods for lithium ion battery cells , 2016 .

[27]  Shi-gang Lu,et al.  Thermal behavior analysis of a pouch type Li[Ni0.7Co0.15Mn0.15]O2-based lithium-ion battery , 2016, Rare Metals.

[28]  Florin Mariasiu,et al.  Electric vehicle battery technologies: From present state to future systems , 2015 .

[29]  Ajay Kapoor,et al.  An improved theoretical electrochemical-thermal modelling of lithium-ion battery packs in electric vehicles , 2015 .

[30]  Huei Peng,et al.  A unified open-circuit-voltage model of lithium-ion batteries for state-of-charge estimation and state-of-health monitoring , 2014 .

[31]  N. Omar,et al.  Lithium iron phosphate based battery: Assessment of the aging parameters and development of cycle life model , 2014 .

[32]  Yonghuang Ye,et al.  Electrochemical–thermal analysis of 18650 Lithium Iron Phosphate cell , 2013 .

[33]  Jianqiu Li,et al.  A review on the key issues for lithium-ion battery management in electric vehicles , 2013 .

[34]  M. Safari,et al.  Life Simulation of a Graphite/LiFePO4 Cell under Cycling and Storage , 2012 .

[35]  Antoni Szumanowski,et al.  Battery Management System Based on Battery Nonlinear Dynamics Modeling , 2008, IEEE Transactions on Vehicular Technology.

[36]  John Newman,et al.  A General Energy Balance for Battery Systems , 1984 .