A numerical strength prediction approach for wood using element-wise local fiber directions from laser scanning

[1]  Johannes A. J. Huber,et al.  A method for generating finite element models of wood boards from X-ray computed tomography scans , 2022, Computers & Structures.

[2]  Hans Pretzsch,et al.  Local 3D fibre orientation for tensile strength prediction of European beech timber , 2021 .

[3]  R. Collet,et al.  Influence of wood anatomy on fiber orientation measurement obtained by laser scanning on five European species , 2020, Journal of Wood Science.

[4]  A. Olsson,et al.  Automatic detection of pith location along norway spruce timber boards on the basis of optical scanning , 2020, European Journal of Wood and Wood Products.

[5]  A. Khaloian Sarnaghi,et al.  An advanced virtual grading method for wood based on surface information of knots , 2019, Wood Science and Technology.

[6]  J. G. van de Kuilen,et al.  Strength prediction of timber boards using 3D FE-analysis , 2019, Construction and Building Materials.

[7]  A. Olsson,et al.  A 3D model for knots and related fiber deviations in sawn timber for prediction of mechanical properties of boards , 2019, Materials & Design.

[8]  H. Pretzsch,et al.  Wood density reduced while wood volume growth accelerated in Central European forests since 1870 , 2018, Forest Ecology and Management.

[9]  A. Olsson,et al.  TRACHEID EFFECT SCANNING AND EVALUATION OF IN-PLANE AND OUT-OF-PLANE FIBER DIRECTION IN NORWAY SPRUCE TIMBER , 2018, Wood and Fiber Science.

[10]  J. V. D. Kuilen,et al.  Slope of grain measurement: a tool to improve machine strength grading by detecting top ruptures , 2018, Wood Science and Technology.

[11]  A. Frangi,et al.  A non-contact method for the determination of fibre direction of European beech wood (Fagus sylvatica L.) , 2018, European Journal of Wood and Wood Products.

[12]  Peter Niemz,et al.  Holzphysik: Physik des Holzes und der Holzwerkstoffe , 2017 .

[13]  Enrico Vicario,et al.  The use of the first industrial X-ray CT scanner increases the lumber recovery value: case study on visually strength-graded Douglas-fir timber , 2017, Annals of Forest Science.

[14]  Anders Olsson,et al.  Growth layer and fibre orientation around knots in Norway spruce: a laboratory investigation , 2017, Wood Science and Technology.

[15]  Josef Füssl,et al.  An algorithm for the geometric reconstruction of knots within timber boards based on fibre angle measurements , 2016 .

[16]  P. Guindos.  Method for the integral calculation of the fiber orientation and the fundamental material properties of softwood logs and lumber , 2016 .

[17]  A. Olsson,et al.  Three-dimensional modelling of knots and pith location in Norway spruce boards using tracheid-effect scanning , 2016, European Journal of Wood and Wood Products.

[18]  Mohamed Belkacemi,et al.  Automatic measurement of wood fiber orientation and knot detection using an optical system based on heating conduction. , 2015, Optics express.

[19]  J. Füssl,et al.  Discussion of common and new indicating properties for the strength grading of wooden boards , 2015, Wood Science and Technology.

[20]  A. Olsson,et al.  Localized modulus of elasticity in timber and its significance for the accuracy of machine strength grading , 2014 .

[21]  J. Füssl,et al.  Numerical simulation tool for wooden boards with a physically based approach to identify structural failure , 2014, European Journal of Wood and Wood Products.

[22]  M. Lukacevic,et al.  A numerical simulation tool for wood grading model development , 2014, Wood Science and Technology.

[23]  A. Olsson,et al.  Local variation of modulus of elasticity in timber determined on the basis of non-contact deformation measurement and scanned fibre orientation , 2014, European Journal of Wood and Wood Products.

[24]  M. Kaliske,et al.  Description of inhomogeneities in wooden structures: modelling of branches , 2013, Wood Science and Technology.

[25]  A. Olsson,et al.  Prediction of timber bending strength and in-member cross-sectional stiffness variation on the basis of local wood fibre orientation , 2013, European Journal of Wood and Wood Products.

[26]  M. Guaita,et al.  A three-dimensional wood material model to simulate the behavior of wood with any type of knot at the macro-scale , 2013, Wood Science and Technology.

[27]  A. Olsson,et al.  Prediction of timber bending strength on basis of bending stiffness and material homogeneity assessed from dynamic excitation , 2012, Wood Science and Technology.

[28]  James R. Goodman,et al.  Failure Modeling: A Basis for Strength Prediction of Lumber , 2007 .

[29]  S. M. Cramer,et al.  Predicting lumber tensile stiffness and strength with local grain angle measurements and failure analysis , 2007 .

[30]  S. Ormarsson,et al.  A numerical study of the shape stability of sawn timber subjected to moisture variation Part 1: Theory , 1998, Wood Science and Technology.

[31]  Jan Nyström,et al.  Automatic measurement of fiber orientation in softwoods by using the tracheid effect , 2003 .

[32]  L. Kollár,et al.  Mechanics of Composite Structures , 2003 .

[33]  Tadashi Yamada,et al.  The Dielectric Properties of Wood VI : On the Dielectric Properties of the Chemical Constituents of Wood and the Dielectric Anisotropy of Wood , 1972 .