论文信息 - Bent SMS fibre structure for temperature measurement

Bent SMS fibre structure for temperature measurement

A temperature sensor fabricated using a bent singlemode-multimode-singlemode (SMS) fibre structure is presented. Experimental results show, that compared to a sensor based on a straight SMS fibre structure, this temperature sensor has a much higher sensitivity of 31.97 pm/°C over a temperature range from 20 to 80°C, based on the measurement of the mean 3 dB wavelength shift, and offers a resolution of 0.1°C for a temperature range from 45 to 80°C when demodulated by a simple ratiometric interrogation technique.

[1] Qiang Wu,et al. Use of a single-multiple-single-mode fiber filter for interrogating fiber Bragg grating strain sensors with dynamic temperature compensation. , 2009, Applied optics.

[2] Ginu Rajan,et al. All-fibre temperature sensor based on macro-bend singlemode fibre loop , 2008 .

[3] Ginu Rajan,et al. SMS Fibre Structure for Temperature Measurement Using a Simple Intensity-Based Interrogation System , 2009 .

[4] Bowei Zhang,et al. High-Temperature Resistance Fiber Bragg Grating Temperature Sensor Fabrication , 2007, IEEE Sensors Journal.

[5] Kuo Li,et al. A high sensitive fiber Bragg grating cryogenic temperature sensor , 2009 .

[6] N S Kim,et al. Fiber Bragg grating temperature sensor with controllable sensitivity. , 1999, Applied optics.