Real-time depth measurement for micro-holes drilled by lasers

An optical system based on the confocal principle has been developed for real-time precision measurements of the depth of micro-holes during the laser drilling process. The capability of the measuring system is theoretically predicted by the Gaussian lens formula and experimentally validated to achieve a sensitivity of 0.5 µm. A nanosecond laser system was used to drill holes, and the hole depths were measured by the proposed measuring system and by the cut-and-polish method. The differences between these two measurements are found to be 5.0% for hole depths on the order of tens of microns and 11.2% for hundreds of microns. The discrepancies are caused mainly by the roughness of the bottom surface of the hole and by the existence of debris in the hole. This system can be easily implemented in a laser workstation for the fabrication of 3D microstructures.

[1]  Joseph M. Schmitt,et al.  Optical coherence tomography (OCT): a review , 1999 .

[2]  Lilong Cai,et al.  An autofocusing measurement system with a piezoelectric translator , 1997 .

[3]  S. Bouwstra,et al.  Fast three-dimensional laser micromachining of silicon for microsystems , 1996 .

[4]  H. Frankena,et al.  Linear approximation for measurement errors in phase shifting interferometry. , 1991, Applied optics.

[5]  J. Mozina,et al.  Optodynamic study of multiple pulses micro drilling. , 2006, Ultrasonics.

[6]  J. Mozina,et al.  An optodynamic determination of the depth of laser-drilled holes by the simultaneous detection of ultrasonic waves in the air and in the workpiece. , 2002, Ultrasonics.

[7]  G S Buller,et al.  Laser depth measurement based on time-correlated single-photon counting. , 1997, Optics letters.

[8]  J. Folkes,et al.  Laser drilling of cooling holes in aeroengines: state of the art and future challenges , 2004 .

[9]  B L Danielson,et al.  Absolute optical ranging using low coherence interferometry. , 1991, Applied optics.

[10]  Geng Ku,et al.  Deeply penetrating photoacoustic tomography in biological tissues enhanced with an optical contrast agent. , 2005, Optics letters.

[11]  F. D. de Mul,et al.  Three-dimensional photoacoustic imaging of blood vessels in tissue. , 1998, Optics letters.

[12]  M. Gower,et al.  Industrial applications of laser micromachining. , 2000, Optics express.

[13]  Franco Quercioli,et al.  MONITORING OF AN ATOMIC FORCE MICROSCOPE CANTILEVER WITH A COMPACT DISK PICKUP , 1999 .

[14]  J. Rossier,et al.  UV Laser Machined Polymer Substrates for the Development of Microdiagnostic Systems. , 1997, Analytical chemistry.