Polyimide/SU-8 catheter-tip MEMS gauge pressure sensor

This paper describes the development of a polyimide/SU-8 catheter-tip MEMS gauge pressure sensor. Finite element analysis was used to investigate critical parameters, impacting on the device design and sensing characteristics. The sensing element of the device was fabricated by polyimide-based micromachining on a flexible membrane, using embedded thin-film metallic wires as piezoresistive elements. A chamber containing this flexible membrane was sealed using an adapted SU-8 bonding technique. The device was evaluated experimentally and its overall performance compared with a commercial silicon-based pressure sensor. Furthermore, the device use was demonstrated by measuring blood pressure and heart rate in vivo.

[1]  A. Bertsch,et al.  A soft contact lens with a MEMS strain gage embedded for intraocular pressure monitoring , 2003, TRANSDUCERS '03. 12th International Conference on Solid-State Sensors, Actuators and Microsystems. Digest of Technical Papers (Cat. No.03TH8664).

[2]  Chang Liu,et al.  Parylene surface-micromachined membranes for sensor applications , 2004, Journal of Microelectromechanical Systems.

[3]  S A Glantz,et al.  Determination of frequency response from step response: application to fluid-filled catheters. , 1979, The American journal of physiology.

[4]  P. Renaud,et al.  Flexible polyimide probes with microelectrodes and embedded microfluidic channels for simultaneous drug delivery and multi-channel monitoring of bioelectric activity. , 2004, Biosensors & bioelectronics.

[5]  W. Reichert,et al.  Polyimides as biomaterials: preliminary biocompatibility testing. , 1993, Biomaterials.

[6]  M. Okoniewski,et al.  A Low-Temperature SU-8 Based Wafer-Level Hermetic Packaging for MEMS Devices , 2009, IEEE Transactions on Advanced Packaging.

[7]  A. Bruno Frazier,et al.  Uses of polyimide for micromachining applications , 1994, Proceedings of IECON'94 - 20th Annual Conference of IEEE Industrial Electronics.

[8]  A. Bruno Frazier,et al.  Recent applications of polyimide to micromachining technology , 1995, IEEE Trans. Ind. Electron..

[9]  P. Renaud,et al.  First steps toward noninvasive intraocular pressure monitoring with a sensing contact lens. , 2004, Investigative ophthalmology & visual science.

[10]  Qing Wang,et al.  Determination of cardiac contractility in awake unsedated mice with a fluid-filled catheter. , 2004, American journal of physiology. Heart and circulatory physiology.

[11]  Sigurd Wagner,et al.  Flexible membrane pressure sensor , 2005 .

[12]  Peter Vettiger,et al.  Fabrication process of high aspect ratio elastic and SU-8 structures for piezoelectric motor applications , 1998 .

[13]  C. Liu,et al.  Recent Developments in Polymer MEMS , 2007 .

[14]  Benjamin C. K. Tee,et al.  Highly sensitive flexible pressure sensors with microstructured rubber dielectric layers. , 2010, Nature materials.

[15]  P. Renaud,et al.  Demonstration of cortical recording using novel flexible polymer neural probes , 2008 .

[16]  P. Renaud,et al.  Polyimide-based microfluidic devices. , 2001, Lab on a Chip.

[17]  Beth L. Pruitt,et al.  SU-8 MEMS Fabry-Perot pressure sensor , 2007 .

[18]  Lori Shutter,et al.  Dual-mode operation of flexible piezoelectric polymer diaphragm for intracranial pressure measurement , 2010 .

[19]  Oguz Atasoy,et al.  Instrumented prosthesis for knee implants monitoring , 2011, 2011 IEEE International Conference on Automation Science and Engineering.

[20]  Robert Langer,et al.  A BioMEMS review: MEMS technology for physiologically integrated devices , 2004, Proceedings of the IEEE.

[21]  Philippe Renaud,et al.  Simulation of epiretinal prostheses - Evaluation of geometrical factors affecting stimulation thresholds , 2011, Journal of NeuroEngineering and Rehabilitation.

[22]  Zhen Fang,et al.  Fabrication and Test of MEMS/NEMS based Polyimide Integrated Humidity, Temperature and Pressure Sensor , 2006, 2006 1st IEEE International Conference on Nano/Micro Engineered and Molecular Systems.

[23]  M. Gijs,et al.  Miniaturized Flexible Temperature Sensor , 2007, Journal of Microelectromechanical Systems.