Research on a six-phase permanent magnet synchronous motor system at dual-redundant and fault tolerant modes in aviation application

Abstract With the development of more/all electrical aircraft technology, an electro-mechanical actuator (EMA) is more and more used in an aircraft actuation system. The motor system, as the crucial part of an EMA, usually adopts the redundancy technology or fault tolerance technology to improve the reliability. To compare the performances of these two motor systems, a 10-pole/12-slot six-phase permanent magnet synchronous motor (PMSM) is designed with the concentrated single-layer winding, which is able to operate at dual-redundant and fault tolerant modes. Furthermore, the position servo performances of the six-phase PMSM at dual-redundant and fault tolerant modes are analyzed, including the normal and fault conditions. In addition, a variable structure proportional-integral-derivative (PID) control strategy is proposed to solve the performance degradation problem caused by phase current saturation. Simulation and experimental results show that the fault tolerant PMSM has a better position servo performance than the dual-redundant PMSM, and the variable structure PID control strategy is able to improve the performance due to phase current saturation.

[1]  Chris Gerada,et al.  Integrated PM Machine Design for an Aircraft EMA , 2008, IEEE Transactions on Industrial Electronics.

[2]  G. Fabri,et al.  Electromechanical Actuator for Helicopter Rotor Damper Application , 2014 .

[3]  Liang Jia-hong A Nonlinear Model of Fault Tolerant Permanent Magnet Motors in the Direct Drive Electromechanical Actuator , 2012 .

[4]  Hamid A. Toliyat,et al.  Fault-Tolerant Interior-Permanent-Magnet Machines for Hybrid Electric Vehicle Applications , 2007, IEEE Transactions on Vehicular Technology.

[5]  Thomas M. Jahns,et al.  Winding inductances of fractional slot surface‐mounted permanent magnet brushless machines , 2009 .

[6]  Sergey Edward Lyshevski Electromechanical flight actuators for advanced flight vehicles , 1999 .

[7]  Alberto Tenconi,et al.  Dual three-phase induction motor drive with digital current control in the stationary reference frame , 1989 .

[8]  Lei Hao,et al.  Electromechanical regenerative actuator with fault tolerance capability for automotive chassis applications , 2011, 2011 IEEE Energy Conversion Congress and Exposition.

[9]  Ye-Hwa Chen,et al.  Robust Control of Fault-Tolerant Permanent-Magnet Synchronous Motor for Aerospace Application With Guaranteed Fault Switch Process , 2015, IEEE Transactions on Industrial Electronics.

[10]  Lei Zhou,et al.  High-Performance Electromechanical Actuator Dynamic Heat Generation Modeling , 2014, IEEE Transactions on Aerospace and Electronic Systems.

[11]  G. Griva,et al.  Vector control of dual-three phase induction motor drives using two current sensors , 2005, Fourtieth IAS Annual Meeting. Conference Record of the 2005 Industry Applications Conference, 2005..

[12]  N. Bianchi,et al.  Strategies for the Fault-Tolerant Current Control of a Five-Phase Permanent-Magnet Motor , 2007, IEEE Transactions on Industry Applications.

[13]  Barrie Mecrow,et al.  Operation of a fault tolerant PM drive for an aerospace fuel pump application , 1997 .

[14]  K. Atallah,et al.  Torque-ripple minimization in modular permanent-magnet brushless machines , 2003 .

[15]  Xing Wei Development of Electromechanical Actuators , 2007 .

[16]  Marco Villani,et al.  High Reliability Permanent Magnet Brushless Motor Drive for Aircraft Application , 2012, IEEE Transactions on Industrial Electronics.

[17]  Hong Guo,et al.  A novel fault tolerant permanent magnet synchronous motor with improved optimal torque control for aerospace application , 2015 .

[18]  Andrew Pike,et al.  Application of condition monitoring to an electromechanical actuator: a parameter estimation based approach , 2002 .

[19]  Wang Da-yu A Control System for Electrical/Mechanical Hybrid Four-redundancy Brushless DC Torque Motor , 2010 .

[20]  Hu Yuwen Design and Experimental Analysis on the Control System of High Reliability Fault Tolerant Permanent Magnet Motor Used in Electric Actuator , 2013 .

[21]  Jussi Karttunen,et al.  Decoupled d-q Model of Double-Star Interior-Permanent-Magnet Synchronous Machines , 2013, IEEE Transactions on Industrial Electronics.

[22]  Kais Atallah,et al.  Optimal torque control of fault-tolerant permanent magnet brushless machines , 2003 .

[23]  Hong Guo,et al.  Fault tolerant control with torque limitation based on fault mode for ten-phase permanent magnet synchronous motor , 2015 .