Perspectives for development of ice-core drilling technology: a discussion

Abstract More than 170 years ago, Louis Agassiz, one of the creators of glacial theory, made his first attempt to drill into the bed of Unteraargletscher, Swiss Alps. Since that time, various systems for thermal and mechanical drilling have been designed especially for boring into ice, and some conventional drill rigs been adopted for ice coring. Although contemporary ice-drilling knowledge and techniques are now familiar, there remain many problems to be solved by advanced modern technology. Specific challenges related to improving old drilling methods and developing new emerging technologies include: (1) identification of depth limitation of ‘dry’ drilling; (2) improvement of casing; (3) searching for the new environmentally friendly low-temperature drilling fluids; (4) reliable elimination of sticking drills; (5) improvement of core quality in the brittle zone; (6) additional core sampling from borehole walls after the core has been drilled; (7) obtaining oriented core; (8) designing automation drilling systems; (9) developing rapid-access drills. Possible ways of solving these problems are presented below.

[1]  W. M. Haynes.  CRC Handbook of Chemistry and Physics , 1990 .

[2]  J. Triest,et al.  Drill fluid selection for the SUBGLACIOR probe: a review of silicone oil as a drill fluid , 2014, Annals of Glaciology.

[3]  Zhengyi Hu,et al.  Environmental considerations of low-temperature drilling fluids , 2014, Annals of Glaciology.

[4]  Mingyi Guo,et al.  Low-molecular-weight, fatty-acid esters as potential low-temperature drilling fluids for ice coring , 2014, Annals of Glaciology.

[5]  S. Tulaczyk,et al.  Subglacial drilling at Black Rapids Glacier, Alaska, U.S.A.: drilling method and sample descriptions , 1999, Journal of Glaciology.

[6]  K. Bruce.  THE AMANDA Project: Drilling precise, large-diameter holes using hot water , 1994 .

[7]  H. Engelhardt,et al.  Borehole evidence for a thick layer of basal ice in the central Ronne Ice Shelf , 1987, Nature.

[8]  P. Talalay.  Dimethyl siloxane oils as an alternative borehole fluid , 2007, Annals of Glaciology.

[9]  Ernest W. Flick,et al.  Industrial solvents handbook , 1985 .

[10]  R. C. Weast.  CRC Handbook of Chemistry and Physics , 1973 .

[11]  C. Bentley,et al.  DISC drill and replicate coring system: a new era in deep ice drilling engineering , 2014, Annals of Glaciology.

[12]  H. Ueda,et al.  Core drilling through the Antarctic ice sheet , 1969 .

[13]  K. Yamamoto,et al.  TechnicalD evelopm ents A new hybrid pressure-coring system for the drilling vessel , 2014 .

[14]  C. Girard,et al.  Ice Core Quality in Electro-Mechanical Drilling, , 1984 .

[15]  R. Hooke,et al.  Closure of deep boreholes in ice sheets: a discussion , 2007, Annals of Glaciology.

[16]  P. Neff.  A review of the brittle ice zone in polar ice cores , 2014, Annals of Glaciology.

[17]  K. Yamamoto,et al.  A new hybrid pressure-coring system for the drilling vessel Chikyu , 2014 .

[18]  W. P. Mason,et al.  Ice Drilling and Coring , 2009 .

[19]  H. Ueda,et al.  DRILLING THROUGH THE GREENLAND ICE SHEET. , 1968 .

[20]  V. M. Zubkov,et al.  Deep drilling at Vostok station, Antarctica: history and recent events , 2007, Annals of Glaciology.

[21]  J. Schwander,et al.  The new improved version of the ISTUK ice core drill , 1994 .

[22]  L. Piard,et al.  A new leak-tight borehole casing at Dome Concordia station, Antarctica, for the SUBGLACIOR project , 2014, Annals of Glaciology.

[23]  Debendra K. Das,et al.  Development of a thermal mechanical drill for sampling ice and rock from great depths , 1992 .

[24]  J. Steffensen,et al.  Promising new borehole liquids for ice-core drilling on the East Antarctic high plateau , 2014, Annals of Glaciology.

[25]  Talalay,et al.  Hole fluids for deep ice core drilling , 2002 .

[26]  P. Talalay.  Subglacial till and bedrock drilling , 2013 .

[27]  Petit,et al.  Deep ice coring at Vostok Station (East Antarctica) by an electromechanical drill , 2002 .

[28]  Pavel Talalay,et al.  Drilling fluid technology in ice sheets: Hydrostatic pressure and borehole closure considerations , 2014 .

[29]  N. Humphrey,et al.  Hot-water Drilling And Bore-hole Closure In Cold Ice , 1990, Journal of Glaciology.

[30]  B. Koci,et al.  A fast mechanical-access drill for polar glaciology, paleoclimatology, geology, tectonics and biology , 2002 .

[31]  R. Mulvaney,et al.  The James Ross Island and the Fletcher Promontory ice-core drilling projects , 2014, Annals of Glaciology.

[32]  T. Stocker,et al.  RADIX: a minimal-resources rapid-access drilling system , 2014, Annals of Glaciology.

[33]  S. Johnsen,et al.  The investigation and experience of using ESTISOL™ 240 and COASOL™ for ice-core drilling , 2014, Annals of Glaciology.

[34]  G. Clarke.  A short history of scientific investigations on glaciers , 1987, Journal of Glaciology.

[35]  R. Armstrong,et al.  The Physics of Glaciers , 1981 .

[36]  H. Engelhardt,et al.  A hot-water ice-coring drill , 2000 .

[37]  Kris Zacny,et al.  Drilling in extreme environments : penetration and sampling on Earth and other planets , 2009 .

[38]  S. Johnsen,et al.  Sticking deep ice core drills: Why, and how to recover , 2002 .