Advanced materials for a damage resilient divertor concept for DEMO: Powder-metallurgical tungsten-fibre reinforced tungsten

Abstract Material issues pose a significant challenge for future fusion reactors like DEMO. When using materials in a fusion environment a highly integrated approach is required. Damage resilience, power exhaust, as well as oxidation resistance during accidental air ingress are driving issues when deciding for new materials. Neutron induced effects, e.g. transmutation adding to embrittlement is crucial to material performance. Here advanced materials, e.g. W f /W or W/Cu, W f /Cu composites allow the step towards a fusion reactor. Recent developments in the area of multi-fibre powder-metallurgical W f /W mark a possible path towards a component based on standard tungsten production technologies. Field assisted sintering technology is used as production route to achieve 94% dense materials. Initial mechanical tests and micro-structural analyses show potential for pseudo-ductile behavior of materials with a reasonable (30%) fibre fraction. In the as-fabricated condition samples showed step-wise cracking while the material is still able to bear rising load, the typical pseudo-ductile behavior of a composite. Yttria is used as the interface material in order to allow the energy dissipation mechanisms to become active. W f /W as plasma facing material contributes here to advanced material strength and crack resilience even with a brittle matrix embrittlement, while W/Cu, W f /Cu composites at the coolant level allow for higher strength at elevated cooling temperatures. In addition to the use of pure tungsten it is demonstrated that tungsten-based self-passivating alloys can also be used in the composite approach.

[1]  K. Benthem,et al.  Evidence of surface cleaning during electric field assisted sintering , 2013 .

[2]  J. Roth,et al.  Plasma facing and high heat flux materials-needs for ITER and beyond , 2002 .

[3]  J. You,et al.  Cracking behavior of tungsten armor under ELM-like thermal shockloads II: A revised prediction for crack appearance map , 2016 .

[4]  C. García-Rosales,et al.  Manufacturing and testing of self-passivating tungsten alloys of different composition , 2016 .

[5]  Juan Du.  A Feasibility Study of Tungsten-Fiber-Reinforced Tungsten Composites with Engineered Interfaces , 2011 .

[6]  K. Benthem,et al.  Time-dependent dielectric breakdown of surface oxides during electric-field-assisted sintering , 2014 .

[7]  J.-H. You,et al.  European DEMO divertor target: Operational requirements and material-design interface , 2016 .

[8]  R. Neu,et al.  Plasma-wall interaction of advanced materials , 2017 .

[9]  Jeong-Ha You,et al.  Progress in the initial design activities for the European DEMO divertor , 2017 .

[10]  R. Neu,et al.  Chemically deposited tungsten fibre-reinforced tungsten – The way to a mock-up for divertor applications , 2016 .

[11]  J. Groza,et al.  Sintering activation by external electrical field , 2000 .

[12]  J.-H. You,et al.  Enhanced toughness and stable crack propagation in a novel tungsten fibre-reinforced tungsten composite produced by chemical vapour infiltration , 2014 .

[13]  Dustin M. Hulbert,et al.  The Absence of Plasma in "Spark Plasma Sintering" , 2008 .

[14]  Li Shuai,et al.  Preparation of yttrium oxide coating by MOCVD as tritium permeation barrier , 2015 .

[15]  H. Bolt,et al.  Self passivating W-based alloys as plasma facing material for nuclear fusion , 2007 .

[16]  B. Wirth,et al.  Irradiation hardening of pure tungsten exposed to neutron irradiation , 2016 .

[17]  H. Bolt,et al.  Self passivating W-based alloys as plasma-facing material , 2009 .

[18]  P. F. Morris,et al.  Developing structural, high-heat flux and plasma facing materials for a near-term DEMO fusion power plant: The EU assessment , 2014, 1408.3546.

[19]  Massimiliano Mattei,et al.  Initial DEMO tokamak design configuration studies , 2015 .

[20]  R. Neu,et al.  Development of tungsten fibre-reinforced tungsten composites towards their use in DEMO—potassium doped tungsten wire , 2016 .

[21]  R. Neu,et al.  Advanced tungsten materials for plasma-facing components of DEMO and fusion power plants , 2016 .

[22]  R. Neu,et al.  Properties of drawn W wire used as high performance fibre in tungsten fibre-reinforced tungsten composite , 2016 .

[23]  J.-H. You,et al.  Thermal and mechanical properties of infiltrated W/CuCrZr composite materials for functionally graded heat sink application , 2013 .

[24]  S. Zinkle,et al.  Operating temperature windows for fusion reactor structural materials , 2000 .

[25]  Gerald Pintsuk,et al.  Materials for DEMO and reactor applications—boundary conditions and new concepts , 2016 .

[26]  G. W. Hollenberg,et al.  Tritium/hydrogen barrier development , 1995 .

[27]  M. Bram,et al.  Powder Metallurgical Tungsten Fiber-Reinforced Tungsten , 2015 .

[28]  A. Kohyama,et al.  Influence of pyrolytic carbon interface thickness on microstructure and mechanical properties of SiC/SiC composites by NITE process , 2008 .

[29]  J.-H. You,et al.  In situ synchrotron tomography estimation of toughening effect by semi-ductile fibre reinforcement in a tungsten-fibre-reinforced tungsten composite system , 2013 .

[30]  R. Neu,et al.  Behavior of tungsten fiber-reinforced tungsten based on single fiber push-out study , 2016 .

[31]  C. García-Rosales,et al.  Smart alloys for a future fusion power plant: First studies under stationary plasma load and in accidental conditions , 2017 .

[32]  R. Ritchie,et al.  On the Fracture Toughness of Advanced Materials , 2009 .

[33]  C. San Marchi,et al.  4.16 – Tritium Barriers and Tritium Diffusion in Fusion Reactors , 2012 .

[34]  T. Muroga,et al.  Microstructure control and deuterium permeability of erbium oxide coating on ferritic/martensitic steels by metal-organic decomposition , 2010 .

[35]  J. Almanstötter.  A modified Drucker–Prager Cap model for finite element simulation of doped tungsten powder compaction , 2015 .

[36]  Y. Hatano,et al.  Sealing of pores in sol–gel-derived tritium permeation barrier coating by electrochemical technique , 2011 .

[37]  M. Rieth,et al.  Optimization and limitations of known DEMO divertor concepts , 2012 .

[38]  T. Höschen,et al.  Thermal stability of the engineered interfaces in Wf/W composites , 2012, Journal of Materials Science.

[39]  Michael R Wisnom,et al.  Demonstration of pseudo-ductility in high performance glass-epoxy composites by hybridisation with thin-ply carbon prepreg , 2013 .

[40]  V. Philipps.  Tungsten as material for plasma-facing components in fusion devices , 2011 .

[41]  J. Brinkmann,et al.  Development of yttrium-containing self-passivating tungsten alloys for future fusion power plant , 2016 .

[42]  T. Muroga,et al.  Deuterium permeation behavior of erbium oxide coating on austenitic, ferritic, and ferritic/martensitic steels , 2009 .

[43]  Huijun Li,et al.  A brief summary of the progress on the EFDA tungsten materials program , 2013 .

[44]  F. Koch,et al.  Gas-driven Deuterium Permeation through Al2O3 Coated Samples , 2004 .