PbS colloidal quantum dot/ZnO‐based bulk‐heterojunction solar cells with high stability under continuous light soaking

PbS colloidal quantum dot (CQD)-based depleted bulk-heterojunction solar cells were constructed, using the 1.2 μm thick nanowire array infiltrated with PbS QDs bearing Br ligands. The long-term stability tests were performed on the solar cells without encapsulation in air under continuous light soaking using a Xe lamp with an AM1.5G filter (100 mW cm−2). Time course of solar cell performances during the tests showed two time periods with distinct behavior, that is, the initial transient time period and the relatively stable region following it. The power conversion efficiency was found to keep approximately 90% of the initial value at the end of the 3000 h light soaking test. The stability tests suggest that the PbS surface modification or passivation reactions play an important role in achieving such a high stability, and demonstrate that PbS CQD/ZnO nanowire array-based depleted bulk-heterojunction solar cells are highly stable. (© 2014 WILEY-VCH Verlag GmbH &Co. KGaA, Weinheim)

[1]  Aram Amassian,et al.  Colloidal-quantum-dot photovoltaics using atomic-ligand passivation. , 2011, Nature materials.

[2]  S. Kuwabata,et al.  Photofunctional Materials Fabricated with Chalcopyrite-Type Semiconductor Nanoparticles Composed of AgInS2 and Its Solid Solutions. , 2014, The journal of physical chemistry letters.

[3]  P. Kamat.  Quantum Dot Solar Cells. The Next Big Thing in Photovoltaics. , 2013, The journal of physical chemistry letters.

[4]  Aram Amassian,et al.  Air-stable n-type colloidal quantum dot solids. , 2014, Nature materials.

[5]  Jiang Tang,et al.  Schottky Quantum Dot Solar Cells Stable in Air under Solar Illumination , 2010, Advanced materials.

[6]  Illan J. Kramer,et al.  The architecture of colloidal quantum dot solar cells: materials to devices. , 2014, Chemical reviews.

[7]  A. Alivisatos,et al.  Hybrid Nanorod-Polymer Solar Cells , 2002, Science.

[8]  A. Henglein.  Chemisorption Effects on Colloidal Lead Nanoparticles , 1999 .

[9]  Jianbo Gao,et al.  Stability Assessment on a 3% Bilayer PbS/ZnO Quantum Dot Heterojunction Solar Cell , 2010, Advanced materials.

[10]  Wenping Yin,et al.  Enhancing the Performance of Sensitized Solar Cells with PbS/CH3NH3PbI3 Core/Shell Quantum Dots. , 2014, The journal of physical chemistry letters.

[11]  Jiang Tang,et al.  Infrared Colloidal Quantum Dots for Photovoltaics: Fundamentals and Recent Progress , 2011, Advanced materials.

[12]  Hiroshi Segawa,et al.  PbS-Quantum-Dot-Based Heterojunction Solar Cells Utilizing ZnO Nanowires for High External Quantum Efficiency in the Near-Infrared Region , 2013 .

[13]  Edward H. Sargent.  Colloidal quantum dot solar cells , 2012 .

[14]  E. Sargent,et al.  Efficient, air-stable colloidal quantum dot solar cells encapsulated using atomic layer deposition of a nanolaminate barrier , 2013 .

[15]  M. Kovalenko,et al.  5.2% efficient PbS nanocrystal Schottky solar cells , 2013 .

[16]  Moungi G. Bawendi,et al.  Improved performance and stability in quantum dot solar cells through band alignment engineering , 2014, Nature materials.

[17]  Matt Law,et al.  Schottky solar cells based on colloidal nanocrystal films. , 2008, Nano letters.

[18]  E. Sargent,et al.  Solution Processed Photovoltaic Devices with 2% Infrared Monochromatic Power Conversion Efficiency: Performance Optimization and Oxide Formation , 2008 .

[19]  Alexey Y. Koposov,et al.  Effect of air exposure on surface properties, electronic structure, and carrier relaxation in PbSe nanocrystals. , 2010, ACS nano.