Co‐optimization of SnS absorber and Zn(O,S) buffer materials for improved solar cells

Thin-film solar cells consisting of earth-abundant and non-toxic materials were made from pulsed chemical vapor deposition (pulsed-CVD) of SnS as the p-type absorber layer and atomic layer deposition (ALD) of Zn(O,S) as the n-type buffer layer. The effects of deposition temperature and annealing conditions of the SnS absorber layer were studied for solar cells with a structure of Mo/SnS/Zn(O,S)/ZnO/ITO. Solar cells were further optimized by varying the stoichiometry of Zn(O,S) and the annealing conditions of SnS. Post-deposition annealing in pure hydrogen sulfide improved crystallinity and increased the carrier mobility by one order of magnitude, and a power conversion efficiency up to 2.9% was achieved. Copyright © 2014 John Wiley & Sons, Ltd.

[1]  R. Gordon,et al.  Band alignment of SnS/Zn(O,S) heterojunctions in SnS thin film solar cells , 2013 .

[2]  R. Gordon,et al.  Atomic layer deposition of Zn(O,S) thin films with tunable electrical properties by oxygen annealing , 2013 .

[3]  R. Engelken,et al.  Optimization of photoconductivity in vacuum-evaporated tin sulfide thin films , 1999 .

[4]  John H. Scofield,et al.  Sputtered molybdenum bilayer back contact for copper indium diselenide-based polycrystalline thin-film solar cells , 1995 .

[5]  M. Ichimura,et al.  First-Principles Study on Influences of Crystal Structure and Orientation on Band Offsets at the CdS/Cu2ZnSnS4 Interface , 2012 .

[6]  Lars Stolt,et al.  Zn(O,S) buffer layers by atomic layer deposition in Cu(In,Ga)Se2 based thin film solar cells: Band alignment and sulfur gradient , 2006 .

[7]  H. Noguchi,et al.  Characterization of vacuum-evaporated tin sulfide film for solar cell materials , 1994 .

[8]  Young-Ho Kim,et al.  The role of ZnO-coating-layer thickness on the recombination in CdS quantum-dot-sensitized solar cells , 2013 .

[9]  Aadarsh Mishra.  PHOTOVOLTAIC PROPERTIES OF SNS BASED SOLAR CELLS , 2014 .

[10]  Marika Edoff,et al.  Strong valence-band offset bowing of ZnO1-xSx enhances p-type nitrogen doping of ZnO-like alloys. , 2006, Physical review letters.

[11]  T. Odom,et al.  Tetrahedral zinc blende tin sulfide nano- and microcrystals. , 2006, Small.

[12]  V. Piacente,et al.  Sublimation study of the tin sulphides SnS2, Sn2S3 and SnS , 1991 .

[13]  T. Buonassisi,et al.  SnS thin-films by RF sputtering at room temperature , 2011 .

[14]  A. Ennaoui,et al.  Recombination mechanisms in highly efficient thin film Zn(S,O)/Cu(In,Ga)S2 based solar cells , 2009 .

[15]  R. Gordon,et al.  Low Temperature Atomic Layer Deposition of Tin Oxide , 2010 .

[16]  E. Kaxiras,et al.  Quasiparticle band structures and interface physics of SnS and GeS , 2013 .

[17]  A. Zunger,et al.  Band-structure, optical properties, and defect physics of the photovoltaic semiconductor SnS , 2012 .

[18]  Takashi Minemoto,et al.  Theoretical analysis of the effect of conduction band offset of window/CIS layers on performance of CIS solar cells using device simulation , 2001 .

[19]  N. Kato,et al.  SnS thin film solar cells with Zn1−xMgxO buffer layers , 2013 .

[20]  Tonio Buonassisi,et al.  Enhancing the efficiency of SnS solar cells via band-offset engineering with a zinc oxysulfide buffer layer , 2013 .

[21]  Seunghoon Nam,et al.  The effect of a blocking layer on the photovoltaic performance in CdS quantum-dot-sensitized solar c , 2011 .

[22]  S. Bent,et al.  Growth characteristics, material properties, and optical properties of zinc oxysulfide films deposited by atomic layer deposition , 2012 .

[23]  Supratik Guha,et al.  Thin film solar cell with 8.4% power conversion efficiency using an earth‐abundant Cu2ZnSnS4 absorber , 2013 .

[24]  Y. Hahn,et al.  Temperature-dependent structural and optical properties of SnS films , 2007 .

[25]  A. D. Vos,et al.  ON THE CDS/CUINSE2 CONDUCTION-BAND DISCONTINUITY. , 1995 .

[26]  Seunghoon Nam,et al.  Optical and electronic properties of post-annealed ZnO:Al thin films , 2010 .

[27]  David B Mitzi,et al.  High‐Efficiency Solar Cell with Earth‐Abundant Liquid‐Processed Absorber , 2010, Advanced materials.

[28]  P. K. Nair,et al.  Polymorphic Tin Sulfide Thin Films of Zinc Blende and Orthorhombic Structures by Chemical Deposition , 2008 .

[29]  Isaac G. Macwan,et al.  Structural and band alignment properties of Al2O3 on epitaxial Ge grown on (100), (110), and (111)A GaAs substrates by molecular beam epitaxy , 2013 .

[30]  Jef Poortmans,et al.  Thin Film Solar Cells: Fabrication, Characterization and Applications , 2006 .

[31]  A. Kitai,et al.  Zinc oxysulfide thin films grown by atomic layer deposition , 1992 .