Study of energy consumption of a hybrid vehicle in real-world conditions

The paper presents an analysis of energy consumption in a Plug-in Hybrid Electric Vehicle (PHEV) used in actual road conditions. Therefore, the paper features a comparison of the consumption of energy obtained from fuel and from energy taken from the vehicle’s batteries for each travel with a total distance of 5000 km. The instantaneous energy consumption per travelling kilometre in actual operating conditions for a combustion engine mode are within the range of 233 to 1170 Wh/km and for an electric motor mode are within the range of 135 to 420 Wh/km. The average values amount to 894 Wh/km for the combustion engine and 208 Wh/km for the electric motor. The experimental data was used to develop curves for the total energy consumption per 100km of road section travelled divided into particular engine types (combustion/electric), demonstrating a close correlation to actual operating conditions. These values were referred to the tested passenger vehicle’s approval data in a WLTP test, with the average values of 303 Wh/km and CO2 emission of 23 g/km.

[1]  Xiaolin Tang,et al.  Adaptive Hierarchical Energy Management Design for a Plug-In Hybrid Electric Vehicle , 2019, IEEE Transactions on Vehicular Technology.

[2]  Ferit Küçükay,et al.  Emission-robust operation of diesel HEV considering transient emissions , 2016 .

[3]  Ireneusz Pielecha,et al.  Operation of electric hybrid drive systems in varied driving conditions , 2017 .

[4]  Jarosław Mamala,et al.  Analysis of fuel consumption of a spark ignition engine in the conditions of a variable load , 2017 .

[5]  J. Kropiwnicki.  A unified approach to the analysis of electric energy and fuel consumption of cars in city traffic , 2019, Energy.

[6]  Jianfei Cao,et al.  Energy optimization of electric vehicle’s acceleration process based on reinforcement learning , 2020 .

[7]  Akhilesh Kumar Maurya,et al.  Acceleration-Deceleration Behaviour of Various Vehicle Types , 2017 .

[8]  Neville A. Stanton,et al.  Detection of new in-path targets by drivers using Stop & Go Adaptive Cruise Control. , 2011, Applied ergonomics.

[9]  Kanok Boriboonsomsin,et al.  Real-World Carbon Dioxide Impacts of Traffic Congestion , 2008 .

[10]  John F. Thomas,et al.  Drive Cycle Powertrain Efficiencies and Trends Derived from EPA Vehicle Dynamometer Results , 2014 .

[11]  Ali Emadi,et al.  Modern Electric, Hybrid Electric, and Fuel Cell Vehicles : Fundamentals, Theory, and Design, Second Edition , 2009 .

[12]  Uwe Remme,et al.  Energy Technology Perspectives 2010 , 2011 .

[13]  Jerzy Merkisz,et al.  The assessment of vehicle exhaust emissions referred to CO2 based on the investigations of city buses under actual conditions of operation , 2017 .

[14]  Georgios Fontaras,et al.  Development and review of Euro 5 passenger car emission factors based on experimental results over various driving cycles. , 2014, The Science of the total environment.

[15]  J. Mamala,et al.  Impact of the acceleration intensity of a passenger car in a road test on energy consumption , 2021, Energy.

[16]  Emre Kural,et al.  State of the Art of Adaptive Cruise Control and Stop and Go Systems , 2020, ArXiv.

[17]  V. Nemov,et al.  Forecast of energy consumption of vehicles , 2017 .

[18]  Jerzy Merkisz,et al.  New Trends in Emission Control in the European Union , 2013 .

[19]  Hongwen He,et al.  Energy Optimization of Electric Vehicle's Acceleration Process Based on Reinforcement Learning , 2019, DEStech Transactions on Environment, Energy and Earth Sciences.

[20]  Dong Ha Kim,et al.  The lithium metal anode in Li–S batteries: challenges and recent progress , 2021 .

[21]  Sung-Ho Hwang,et al.  Regenerative braking algorithm for a hybrid electric vehicle with CVT ratio control , 2006 .

[22]  Angkee Sripakagorn,et al.  An Investigation of Fuel Economy Potential of Hybrid Vehicles under Real-World Driving Conditions in Bangkok , 2015 .

[23]  Fuping Pan,et al.  Nitrogen Coordinated Single Atomic Metals Supported on Nanocarbons: A New Frontier in Electrocatalytic CO2 Reduction , 2018 .

[24]  Georg Rill,et al.  Road Vehicle Dynamics: Fundamentals and Modeling , 2011 .

[25]  Mariusz P. Furmanek,et al.  Analysis of the regenerative braking process for the urban traffic conditions , 2019, Combustion Engines.

[26]  Kanok Boriboonsomsin,et al.  Energy and emissions impacts of a freeway-based dynamic eco-driving system , 2009 .

[27]  J. Mamala,et al.  Analysis of the Total Unit Energy Consumption of a Car with a Hybrid Drive System in Real Operating Conditions , 2021, Energies.

[28]  Z. Chłopek.  Research on energy consumption by an electrically driven automotive vehicle in simulated urban conditions , 2013 .

[29]  J. Pielecha,et al.  Simulation analysis of electric vehicles energy consumption in driving tests , 2019 .

[30]  Biagio Ciuffo,et al.  Fuel consumption and CO2 emissions from passenger cars in Europe Laboratory versus real-world emissions , 2017 .

[31]  Paul H. Chambon,et al.  Fuel Consumption Sensitivity of Conventional and Hybrid Electric Light-Duty Gasoline Vehicles to Driving Style , 2017 .

[32]  Henning Lohse-Busch,et al.  Vehicle Inertia Impact on Fuel Consumption of Conventional and Hybrid Electric Vehicles Using Acceleration and Coast Driving Strategy , 2009 .

[33]  Pierluigi Pisu,et al.  Hierarchical energy management control strategies for connected hybrid electric vehicles considering efficiencies feedback , 2019, Simul. Model. Pract. Theory.

[34]  van den,et al.  Design of a hybrid adaptive cruise control stop-&-go system , 2007 .

[35]  Rui Xiong,et al.  Battery and ultracapacitor in-the-loop approach to validate a real-time power management method for an all-climate electric vehicle , 2018 .

[36]  Satoshi Kitayama,et al.  Torque control strategy and optimization for fuel consumption and emission reduction in parallel hybrid electric vehicles , 2015 .

[37]  Jin Huang,et al.  Energy management strategy for fuel cell/battery/ultracapacitor hybrid vehicle based on fuzzy logic , 2012 .