Mechanical track deterioration due to lateral geometry irregularities

This thesis deals with how a degraded track geometry influences further degradation of the geometry and the formation of rolling contact fatigue (RCF) and wear of rails. The overall objective is optimisation of railway maintenance. For this, further understanding and quantification of the deterioration of track components are needed. Dynamic multibody simulations have been performed featuring different wagons, and a track with different curve radii and different levels of track geometry degradation. With the resulting wheel/rail interaction degradation indicators are evaluated. Increased track shift forces are considered as an indicator of further track geometry degradation. Two different RCF indices (one shakedown map based and one wear number based) are used to quantify surface degradation of rails. Measured lateral track irregularities were found to follow a normal distribution reasonably well. Furthermore, the standard deviation of track shift forces was shown to have a linear relationship with the standard deviation of the lateral irregularities. For large curve radii an increase of the level of lateral irregularities increases the length of rail affected by RCF. The opposite is predicted for small curve radii where the length of rail affected by RCF decreases with increasing levels of lateral irregularities. For very small curve radii it was shown that the degradation mechanism shifts from pure wear for low levels of lateral irregularities to a mixed wear/RCF degradation for higher levels of lateral irregularities. Amplification of lateral irregularities in different wavelength spans revealed that an amplification of longer wavelengths (between 10--50 metres) had the largest influence on the length of rail affected by RCF in shallow curves. A correlation study between predicted tangential wheel/rail contact forces and lateral irregularities (amplitudes of the irregularities, first order derivatives and second order derivatives) was carried out. No significant correlation was found.

[1]  Elena Kabo,et al.  An engineering model for prediction of rolling contact fatigue of railway wheels , 2002 .

[2]  P. Torstensson.  Rail Corrugation Growth on Curves , 2012 .

[3]  Andreas Haigermoser,et al.  Track geometry evaluation method based on vehicle response prediction , 2010 .

[4]  U. Espling.  Maintenance strategy for a railway infrastructure in a regulated environment , 2007 .

[5]  Iman Arasteh Khouy.  Optimization of track geometry maintenance: a study of track geometry degradation to specify optimal inspection intervals , 2011 .

[6]  Elena Kabo,et al.  Identifying root causes of heavy haul wheel damage phenomena , 2013 .

[7]  Stuart L. Grassie,et al.  Rolling contact fatigue on the British railway system: treatment , 2005 .

[8]  E. Magel,et al.  Rolling Contact Fatigue: A Comprehensive Review , 2011 .

[9]  Donald T. Eadie,et al.  Influencing rolling contact fatigue through top of rail friction modifier application – A full scale wheel–rail test rig study , 2011 .

[10]  Robert Desmond Fröhling,et al.  Wheel/rail contact geometry assessment to limit rolling contact fatigue initiation at high axle loads , 2012 .

[11]  Haitham M. Hawari.  Minimising track degradation through managing vehicle/track interaction , 2007 .

[12]  Haitham M. Hawari,et al.  Effects of train characteristics on the rate of deterioration of track roughness , 2008 .

[13]  P. Fonseca Teixeira,et al.  Uncertainty in Rail-Track Geometry Degradation: Lisbon-Oporto Line Case Study , 2011 .

[14]  J Tunna,et al.  A parametric study of the effects of freight vehicles on rolling contact fatigue of rail , 2009 .

[15]  Peter Pointner,et al.  Definitive guidelines on the use of different rail grades INNOTRACK GUIDELINE 08 Fall , 2010 .

[16]  C. Esveld.  Modern railway track , 1989 .

[17]  Gustav Lönnbark.  Characterization of Track Irregularities With respect to vehicle response , 2012 .

[18]  Tomas Karis,et al.  Track Irregularities for High-Speed Trains : Evaluation of their correlation with vehicle response , 2009 .

[19]  Elena Kabo,et al.  A numerical study of the influence of lateral geometry irregularities on mechanical deterioration of freight tracks , 2012 .

[20]  Elena Kabo,et al.  Rolling contact fatigue prediction for rails and comparisons with test rig results , 2010 .

[21]  R. Stock,et al.  The effects of top of rail friction modifier on wear and rolling contact fatigue : Full-scale rail-wheel test rig evaluation, analysis and modelling , 2008 .

[22]  Chiara Paderno.  Simulation of ballast behaviour under traffic and tamping process , 2009 .

[23]  Joe Kalousek,et al.  The blending of theory and practice in modern rail grinding , 2003 .

[24]  Mats Berg,et al.  On the use of second-order derivatives of track irregularity for assessing vertical track geometry quality , 2012 .

[25]  Sebastian Stichel,et al.  Investigation of the risk for rolling contact fatigue on wheels of different passenger trains , 2008 .

[26]  E. Kabo,et al.  Fatigue of railway wheels and rails under rolling contact and thermal loading—an overview , 2005 .

[27]  Elena Kabo,et al.  The detrimental effects of hollow wear––field experiences and numerical simulations , 2008 .

[28]  Francis Franklin,et al.  Rail surface fatigue and wear , 2009 .

[29]  K. Johnson.  The Strength of Surfaces in Rolling Contact , 1989 .

[30]  M Andersson.  STRATEGIC PLANNING OF TRACK MAINTENANCE. STATE OF THE ART , 2002 .