A Flexible Piezoelectric Sensor for Microfluidic Applications Using Polyvinylidene Fluoride

A flexible technology for microfluidic applications using piezoelectric polyvinylidene fluoride (PVDF) and polydimethylsiloxane (PDMS) was developed. The flexible piezoelectric PVDF detects the flow rates and impulse pressure signal using piezoelectric characteristics. This study uses microelectromechanical systems (MEMS) technology to fabricate the sensing patterns on PVDF sheets, designs a molding transfer to form the microfluidic channels of the PDMS, and integrates them together. Experimental results show that PVDF films has good piezoelectricity at stretching ratio of 4, the flow rates ranged from 100 to 450 mL/min at dynamic controlling sensing, the miniature curvature radius is about 3 cm, and the cross section of the flexible microchannels is about 200 times 200 mum2. The feasibility studies show that molding transfer is an appropriate low-cost technology for fabricating the flexible piezoelectric channels. The PVDF can be easily manufactured using MEMS process because it has a good mechanical strength and electrochemical stability in polymers.

[1]  Y. Gianchandani,et al.  A fabrication process with high thermal isolation and vacuum sealed lead transfer for gas reactors and sampling microsystems , 2003, The Sixteenth Annual International Conference on Micro Electro Mechanical Systems, 2003. MEMS-03 Kyoto. IEEE.

[2]  G. Zech,et al.  Monolithically integrated micro flow sensor for lab-on-chip applications , 2005 .

[3]  M. Huneault,et al.  Proton exchange membranes based on PVDF/SEBS blends , 2006 .

[4]  I. Fujimoto,et al.  Development of artificial skin surface ridges with vibrotactile sensing elements for incipient slip detection , 2001, Conference Documentation International Conference on Multisensor Fusion and Integration for Intelligent Systems. MFI 2001 (Cat. No.01TH8590).

[5]  G. Stemme,et al.  Three dimensional silicon triple-hot-wire anemometer based on polyimide joints , 1998, Proceedings MEMS 98. IEEE. Eleventh Annual International Workshop on Micro Electro Mechanical Systems. An Investigation of Micro Structures, Sensors, Actuators, Machines and Systems (Cat. No.98CH36176.

[6]  A. Salimi,et al.  FTIR STUDIES OF -PHASE CRYSTAL FORMATION IN STRETCHED PVDF FILMS , 2003 .

[7]  T. Bifano,et al.  Development of a rapid-response flow-control system using MEMS microvalve arrays , 2004, Journal of Microelectromechanical Systems.

[8]  G. Yin,et al.  Proton exchange membranes based on poly(vinylidene fluoride) and sulfonated poly(ether ether ketone) , 2006 .

[9]  Yu-Chong Tai,et al.  A MEMS multi-sensor chip for gas flow sensing , 2005 .

[10]  Robert A. Street,et al.  Jet printing flexible displays , 2006 .

[11]  M. Elwenspoek,et al.  Determination of the sensitivity behavior of an acoustic, thermal flow sensor by electronic characterization , 2004 .

[12]  U.C. Wejinya,et al.  Closed-loop optimal control-enabled piezoelectric microforce sensors , 2006, IEEE/ASME Transactions on Mechatronics.

[13]  K. Mabuchi,et al.  Parylene flexible neural probe with micro fluidic channel , 2004, 17th IEEE International Conference on Micro Electro Mechanical Systems. Maastricht MEMS 2004 Technical Digest.

[14]  Jin Jang,et al.  Displays develop a new flexibility , 2006 .

[15]  L. Park,et al.  Fabrication of charged particles for electrophoretic display , 2006 .