A new development of measurement technique for residual stresses generated by the cold tube drawing process with a fixed mandrel

[1]  S. Georgy.  Experiment for Determination of Residual Stresses in Pipes , 2019, KnE Engineering.

[2]  R. Boman,et al.  Finite element modelling of cold drawing for high-precision tubes , 2018, Comptes Rendus Mécanique.

[3]  P. Bella,et al.  Numerical simulation of cold drawing of steel tubes with straight internal rifling , 2018 .

[4]  Heinz Palkowski,et al.  Integrated computational material engineering model development for tube drawing process , 2018 .

[5]  Sadettin Orhan,et al.  Experimental and finite element analysis of residual stresses in cold tube drawing process with a fixed mandrel for AISI 1010 steel tube , 2017 .

[6]  H. Palkowski,et al.  Residual stresses evolution in Cu tubes, cold drawn with tilted dies – Neutron diffraction measurements and finite element simulation , 2016 .

[7]  Morteza Hosseinzadeh,et al.  An analysis of tube drawing process used to produce squared sections from round tubes through FE simulation and response surface methodology , 2016 .

[8]  Heinz Palkowski,et al.  Precision tube production: Influencing the eccentricity and residual stresses by tilting and shifting , 2015 .

[9]  Jian Zhang,et al.  Analysis of residual stress for mismatch metal–glass seals in solar evacuated tubes , 2014 .

[10]  Cheng-Hsien Yu,et al.  Optimum Die Design for Single Pass Steel Tube Drawing with Large Strain Deformation , 2014 .

[11]  H. Palkowski,et al.  Investigation on the Residual Stress State of Drawn Tubes by Numerical Simulation and Neutron Diffraction Analysis , 2013, Materials.

[12]  S. Syahrullail,et al.  Friction characteristic of mineral oil containing palm fatty acid distillate using four ball tribo-tester , 2013 .

[13]  Mario Fafard,et al.  Optimization on the cold drawing process of 6063 aluminium tubes , 2011 .

[14]  A. Ugural,et al.  Advanced Mechanics of Materials and Applied Elasticity , 2011 .

[15]  Heinz Palkowski,et al.  Residual stress distribution in seamless tubes determined experimentally and by FEM , 2011 .

[16]  R. D. Vieira,et al.  Measurement of Stresses in Pipelines Using Hole Drilling Rosettes , 2011 .

[17]  Dominique Choqueuse,et al.  Influence of residual stresses and geometric imperfections on the elastoplastic collapse of cylindrical tubes under external pressure , 2009 .

[18]  Makoto Murata,et al.  Effect of plug on levelling of residual stress in tube drawing , 2008 .

[19]  V. Pisarev,et al.  Combined implementing the hole-drilling method and reflection hologram interferometry for residual stresses determination in cylindrical shells and tubes , 2007 .

[20]  Frederico Ozanan Neves,et al.  NUMERICAL AND EXPERIMENTAL ANALYSIS OF TUBE DRAWING WITH FIXED PLUG , 2005 .

[21]  T. Kuboki,et al.  Optimisation of method for reducing residual stresses after cold bar drawing , 2002 .