Efficient Inverted Polymer Solar Cells with Directly Patterned Active Layer and Silver Back Grating

We have investigated the effects of a directly patterned active layer together with silver nanograting arrays as the anode of inverted polymer solar cells (PSCs). The patterned nanostructure not only greatly enhances the light absorption of the active layer through both light diffraction and coupling to surface plasmon polariton (SPP) modes but also obviously promotes the fill factor of the patterned device. The absorption spectrum shows improvement over a broad wavelength range, especially around the 400 nm region and the near-infrared region surrounding 700 nm, which can also be reconfirmed from Incident Photon to Electron Conversion Efficiency (IPCE) and zeroth-order reflection spectra. Most importantly, our physical study shows that the absorption peak of 400 nm is due to the resonant waveguide mode, and the absorption peak of 700 nm is attributed to the excited SPP mode induced by the metallic back grating. Besides, another splitting SPP mode, called plasmonic band edge, around 800 nm is clarified fr...

[1]  T. Gaylord,et al.  Formulation for stable and efficient implementation of the rigorous coupled-wave analysis of binary gratings , 1995 .

[2]  Rene Lopez,et al.  Electrophotonic enhancement of bulk heterojunction organic solar cells through photonic crystal photoactive layer , 2009 .

[3]  W. Barnes,et al.  Surface plasmon subwavelength optics , 2003, Nature.

[4]  W. Chew,et al.  Angular response of thin-film organic solar cells with periodic metal back nanostrips. , 2011, Optics letters.

[5]  N. Koch,et al.  High Fill Factor and Open Circuit Voltage in Organic Photovoltaic Cells with Diindenoperylene as Donor Material , 2010 .

[6]  Gang Li,et al.  Doping of the Metal Oxide Nanostructure and its Influence in Organic Electronics , 2009 .

[7]  A. Ostfeld,et al.  Plasmonic concentrators for enhanced light absorption in ultrathin film organic photovoltaics , 2011 .

[8]  Gang Li,et al.  Recent Progress in Polymer Solar Cells: Manipulation of Polymer:Fullerene Morphology and the Formation of Efficient Inverted Polymer Solar Cells , 2009 .

[9]  Xiong Gong,et al.  Polymer bulk heterojunction solar cells: Function and utility of inserting a hole transport and electron blocking layer into the device structure , 2011 .

[10]  John E. Anthony,et al.  Determination of energy level alignment at interfaces of hybrid and organic solar cells under ambient environment , 2011 .

[11]  Yidong Huang,et al.  Design of plasmonic back structures for efficiency enhancement of thin-film amorphous Si solar cells. , 2009, Optics letters.

[12]  Rene Lopez,et al.  Photonic Crystal Geometry for Organic Polymer:Fullerene Standard and Inverted Solar Cells , 2011 .

[13]  Kazuhito Hashimoto,et al.  Tailoring organic heterojunction interfaces in bilayer polymer photovoltaic devices. , 2011, Nature materials.

[14]  Yang Yang,et al.  Nanoparticle-assisted high photoconductive gain in composites of polymer and fullerene. , 2008, Nature nanotechnology.

[15]  Juhwan Kim,et al.  Efficient Polymer Solar Cells with Surface Relief Gratings Fabricated by Simple Soft Lithography , 2008 .

[16]  Yasha Yi,et al.  Efficiency enhancement in Si solar cells by textured photonic crystal back reflector , 2006 .

[17]  Kitt Reinhardt,et al.  Broadband light absorption enhancement in thin-film silicon solar cells. , 2010, Nano letters.

[18]  Nils-Krister Persson,et al.  Surface plasmon increase absorption in polymer photovoltaic cells , 2007 .

[19]  Weng Cho Chew,et al.  A comprehensive study for the plasmonic thin-film solar cell with periodic structure. , 2010, Optics express.

[20]  Wei E. I. Sha,et al.  Optical and electrical properties of efficiency enhanced polymer solar cells with Au nanoparticles in a PEDOT–PSS layer , 2011 .

[21]  H. Atwater,et al.  Improved red-response in thin film a-Si:H solar cells with soft-imprinted plasmonic back reflectors , 2009 .

[22]  J. Rogers,et al.  Large-area flexible 3D optical negative index metamaterial formed by nanotransfer printing. , 2011, Nature nanotechnology.

[23]  Kitson,et al.  Physical origin of photonic energy gaps in the propagation of surface plasmons on gratings. , 1996, Physical review. B, Condensed matter.

[24]  P. Bruce,et al.  Nanostructured materials for advanced energy conversion and storage devices , 2005, Nature materials.

[25]  Yi Cui,et al.  Plasmonic Dye‐Sensitized Solar Cells , 2014 .

[26]  J. Jung,et al.  Annealing‐Free High Efficiency and Large Area Polymer Solar Cells Fabricated by a Roller Painting Process , 2010 .

[27]  O Ok Park,et al.  Enhancement of donor-acceptor polymer bulk heterojunction solar cell power conversion efficiencies by addition of Au nanoparticles. , 2011, Angewandte Chemie.

[28]  Efficient hole collection by introducing ultra-thin UV-ozone treated Au in polymer solar cells , 2011 .

[29]  Hee‐Tae Jung,et al.  Enhanced solar-cell efficiency in bulk-heterojunction polymer systems obtained by nanoimprinting with commercially available AAO membrane filters. , 2009, Small.

[30]  F. Chien,et al.  Facile Transfer Method for Fabricating Light-Harvesting Systems for Polymer Solar Cells , 2011 .

[31]  W. Li,et al.  Donor-acceptor conjugated polymer based on naphtho[1,2-c:5,6-c]bis[1,2,5]thiadiazole for high-performance polymer solar cells. , 2011, Journal of the American Chemical Society.

[32]  Harry A Atwater,et al.  Design Considerations for Plasmonic Photovoltaics , 2010, Advanced materials.

[33]  Helmut Stiebig,et al.  Thin-film silicon solar cells with efficient periodic light trapping texture , 2007 .

[34]  H. Atwater,et al.  Plasmonics for improved photovoltaic devices. , 2010, Nature materials.

[35]  Yang Yang,et al.  Efficiency enhancement in organic solar cells with ferroelectric polymers. , 2011, Nature materials.

[36]  Kai-Ming Ho,et al.  On Realizing Higher Efficiency Polymer Solar Cells Using a Textured Substrate Platform , 2011, Advanced materials.

[37]  Peter Bienstman,et al.  Angle insensitive enhancement of organic solar cells using metallic gratings , 2011 .

[38]  Christoph J. Brabec,et al.  Interface materials for organic solar cells , 2010 .

[39]  Pei-Jung Li,et al.  Highly efficient and stable inverted polymer solar cells integrated with a cross-linked fullerene material as an interlayer. , 2010, Journal of the American Chemical Society.

[40]  Domenico Pacifici,et al.  Plasmonic nanostructure design for efficient light coupling into solar cells. , 2008, Nano letters.

[41]  C. Ballif,et al.  Plasmonic absorption in textured silver back reflectors of thin film solar cells , 2008 .

[42]  Charles T. Black,et al.  Quantifying Interfacial Electric Fields and Local Crystallinity in Polymer–Fullerene Bulk‐Heterojunction Solar Cells , 2011 .

[43]  Futao Kaneko,et al.  Grating-coupled surface plasmon enhanced short-circuit current in organic thin-film photovoltaic cells. , 2011, ACS applied materials & interfaces.

[44]  Yanming Sun,et al.  Inverted Polymer Solar Cells Integrated with a Low‐Temperature‐Annealed Sol‐Gel‐Derived ZnO Film as an Electron Transport Layer , 2011, Advanced materials.