Elastohydrodynamic Lubrication in Extended Parameter Ranges — Part I: Speed Effect

Elastohydrodynamic Lubrication (EHL) has been given great attention in the last 40 years. Conventional theories by Dowson and Higginson for line contacts and Hamrock and Dowson for point contacts have been among the most important contributions and widely used in industries. However, commonly used film thickness formulae, developed more than 25–40 years ago when the computational power was very limited, were originally from curve-fitting based on limited numbers of numerical solutions obtained in relatively narrow parameter ranges. Actual operating conditions in typical engineering applications, such as gears, bearings, cams and traction drives, sometimes fall far outside those parameter ranges, and prediction through extrapolation is often difficult to give satisfactory results. As the computer technology and numerical simulation methods have been advancing greatly, one can now analyze cases in extended parameter ranges that cover various practical applications under severe conditions. This paper is Part I of a recent study, focusing on the speed effect on the EHL film thickness. In a relatively narrow speed range, the present results agree well with those from the conventional theory. In the extended speed and load ranges, however, the relationship between the film thickness and the rolling speed may no longer obey the simple power law described by the conventional theory. It appears to be a complicated function of speed, load and contact ellipticity. Commonly used formulae may often overestimate the film thickness especially when the load is heavy and the speed is not high. Presented at the 57th Annual Meeting in Houston, Texas May 19–23, 2002

[1]  A. Cameron,et al.  Optical Analysis of Ball Bearing Starvation , 1971 .

[2]  R. Gohar,et al.  Theoretical and experimental studies of the oil film in lubricated point contact , 1966, Proceedings of the Royal Society of London. Series A. Mathematical and Physical Sciences.

[3]  Dong Zhu,et al.  A Full Numerical Solution to the Mixed Lubrication in Point Contacts , 2000 .

[4]  R W Snidle,et al.  Elastohydrodynamic Lubrication of Heavily Loaded Circular Contacts , 1989 .

[5]  D. Dowson,et al.  Isothermal Elastohydrodynamic Lubrication of Point Contacts: Part III—Fully Flooded Results , 1976 .

[6]  A. N. May.  Fatigue under Random Loads , 1961, Nature.

[7]  Dong Zhu,et al.  Effects of Rough Surface Topography and Orientation on the Characteristics of EHD and Mixed Lubrication in Both Circular and Elliptical Contacts , 2001 .

[8]  S. Wen,et al.  An Inverse Solution to the Point Contact EHL Problem Under Heavy Loads , 1987 .

[9]  D. Dowson,et al.  Isothermal Elastohydrodynamic Lubrication of Point Contacts: Part IV—Starvation Results , 1976 .

[10]  H. Cheng,et al.  A Numerical Solution of the Elastohydrodynamic Film Thickness in an Elliptical Contact , 1970 .

[11]  A. Cameron,et al.  The solution of the point contact elasto-hydrodynamic problem , 1975, Proceedings of the Royal Society of London. A. Mathematical and Physical Sciences.

[12]  Dong Zhu,et al.  A Computer Program Package for the Prediction of EHL and Mixed Lubrication Characteristics, Friction, Subsurface Stresses and Flash Temperatures Based on Measured 3-D Surface Roughness , 2001 .

[13]  Duncan Dowson,et al.  A theoretical analysis of the isothermal elastohydrodynamic lubrication of concentrated contacts. I. Direction of lubricant entrainment coincident with the major axis of the Hertzian contact ellipse , 1985, Proceedings of the Royal Society of London. A. Mathematical and Physical Sciences.

[14]  D. Dowson,et al.  Isothermal Elastohydrodynamic Lubrication of Point Contacts: Part 1—Theoretical Formulation , 1975 .

[15]  D. Dowson,et al.  Isothermal Elastohydrodynamic Lubrication of Point Contacts: Part II—Ellipticity Parameter Results , 1976 .